Flow Meter (compressed air/gases) | FC100-CA ... - FlowVision GmbH

ø.709
Cable types and accessories (CSF-11) | FC100-CA
1
8-pole round connector
(without cable, for individual wiring by customer)
0Z112Z003124
50
1.97
ø18
Accessories
Threaded installation bush
0Z122Z000196
front sealing ring
union nut
threaded installation bush
Teflon sealing ring
0Z122Z000197
rear sealing
ring
10-pole clamping connector for cable types 15 and 18
(without cable, for individual wiring by customer)
0Z112Z000167
R 3/4´´
Ø18
Ø.709
Ø18
Ø.709
19
.748
SW 27
1.06 in.
52
2.05
SW 29
1.14 in.
PG16 nickel-plated brass
(standard)
0Z122Z000128
NPT3/4" moulded, black
0Z122Z000131
Suitable up to 25 bar/363 psi if used with stainless steel CSF-11 monitoring head.
(Observe instructions for installation.)***)
Caution: Stainless steel ring is designed to cut into monitoring head.
Pressure resistant to 25 bar/363 psi.
Teflon ring can only be used from 0 to 2 bar (29.0 psi).
Please observe user manual !
***) Caution: The threaded installation bush is not made of Hastelloy alloy C4.
The user has to check suitability of the threaded installation bush with
regard to chemical resistance.
Otherwise he will have to use a sutiable moulded installation bush and will
then have to observe the applicable pressure and temperature limits.
O ring
PG16
3/4"NPT
Locking set 01
0Z122Z000204
1
2
3
SW30
1.18
SW33
1.30
pressure resistant up to 2 bar/29.0 psi
pressure resistant up to 2 bar/29.0 psi
This is a metric design and millimeter dimensions take precedence ( mm )
inch
1 chain 4 x 32 DIN 5685 (approx. 1 m/3.28 ft)
2 catch for chain NG 5
3 clip with screw and nuts DN15 to DIN 11850
Caution: Standard warranty cover will be invalidated if the correct
FlowVision monitoring head/control unit connecting cable is
not used.
76 2010 www.flowvision-gmbh.de