download - EUROmodul international

p
Kindergarden ‚Magic Forrest‘ in Belgrade
Installations
All installations are mostly built in the modules during the manufacturing process in the factory. On the site, during the
assemblage the previously prepared installations are just connected. Sometimes, the installations are partially prepared on
the site. Electrical installations are created in accordance with the regulations. Plumbing (pipes and elements) is made of
PVC. For each model it is necessary to create a technical design.
Transportation
EUROmodul system of the standard modules (length up to 9m, width 2,438m and height 2,950m) provides transportation
without additional escort, by trucks and train. Modules of the above dimensions can be transported in covered trucks
and also in opened trucks in which case the modules are’ packed’. If the modules exceed stated dimensions, for their
transportation special vehicles are needed. For long
distances (over 1000km) it is recommended for modules to
be packed in the ‘flat-packs’ which provides the transport of
3-4 modules instead of just one.
Assemblage on site
EUROmodul prepares designs for the foundations and
insolation, plumbing and sewage installations. In most cases
the foundations are prepared by the local construction
company. Assemblage is done based on the montage project.
If the assemblage is handled by a local construction company,
Euromodul provides help and technical assistant.
p
Kindergarden - school
1. classroom - playroom
2. multipurpose hall
3. toilets
4. hall
5. offices
6. dressroom
16
| tel: +385 \ 51 \ 257 275 | fax: +385 \ 51 \ 258 472
info@euromodul.org | www.euromodul.org | 17