The right door, whatever the property - Novoferm Norge

More documents

Recommendations

Info

T90-1 fire-resistant doors Single leaf, fire-resistant steel doors and wall flaps with thick rebate Single, full-leaf steel doors and/or flaps, fire-retardant in accordance with DIN 4102, with door closer. Door leaf and frame galvanised and primed (powder-coated) in RAL 9016. Hardware (if standard hardware is used, the profile cylinder must be lengthened by 5/15 mm) Frames Standard: Corner frame with sealing profile, counterframe, wrap-around or block frame or frame for butt wall connection optionally available Sills Type N9: Standard: B1, B2, B3 with four-sided continuous frame, A, C, RS1 or RS2 optionally available Type N19: Standard: A floor level, B1, B2, B3 with four-sided continuous frame or C with lower rebate or RS1 sealing sills with lowerable floor seal and/or RS2 hump sill optionally available Surfaces Door leaf and frame galvanised and primed (powder-coated) in RAL 9016. T90-1 type N9 Wall flap with thick rebate CF Nominal size 5 Co-ordinating size 5 40 81 Clear passage dimension 40 81 3-part hinge with ball bearing Horizontal section 1,0 1,5 60 1,0 1,5 CF T90-1 type N19 Door with thick rebate CF 5 40 81 Horizontal section Nominal size Co-ordinating size 5 Clear passage 40 dimension 81 3-part hinge with ball bearing 1,0 1,5 60 1,0 1,5 CF The following can also be supplied on request • Fire-resistant glazing (Type N9: min. frieze widths, 4-sided 237 mm) • Smoke protection in accordance with DIN 18095 • Soundproofing Type N9: to 800 x 800 mm 40 dB, 800 x 800 mm or more 43 dB (tested for full-leaf and sill, B1 and B2) Type N19: 35 dB (tested for full-leaf and RS1 sill) both types tested to DIN EN ISO 140-3 evaluated in accordance with DIN EN ISO 717-1 (laboratory values) • Burglar resistance both sides tested to DIN ENV 1627 WK2 on full-leaf version, to CS 1250 x 2500 mm with floor recess > 20 mm on type N19. (Burglar resistance not permitted on both types for fire-resistant mounting walls or foam mortar walls or for glazing on type N9) • In stainless steel (not for type N19) Nominal size 5 Co-ordinating size 40 Clear passage 40 dimension 5 81 81 Vertical section 1,0 1,5 1,0 1,5 Door closer needed if CS surface > 1 m² or for smoke protection version or when installed in foam mortar or mounting walls. 60 CF CF 5 Nominal size Co-ordinating size Clear passage dimension 20 40 81 5 Vertical section 1,0 1,5 60 CF 1,0 1,5 UEFF 12
T90-1 fire-resistant doors Technical data Resistance class/Type T90-1 type N9 T90-1 type N19 Designation Wall flap Door Models Approved dimensions Door leaf 1/2 leaf height Co-ordinating size (CS) Width min. – max. 500 - 1250 625 - 1375 Height min. – max. 500 - 1750 1750 - 2500 with top panel Max. height – – of which: Door Max. height – – Smoke protection with top panel Max. CS – – Approx. leaf thickness 63 63 Approx. sheet thickness up to CS 500 x 1750 1.0 (optionally 1.5) 1.0 (optionally 1.5) Active leaf – – Inactive leaf – – Type of opening in accordance with DIN Left or right Left or right Masonry > 175 > 175 Concrete > 140 > 140 Walls Foam mortar block/precision blocks > 175 > 175 Versions Reinforced foam mortar wall panels > 150 > 150 F90 walls made of gypsum plasterboard > 95 > 95 (in accordance with DIN 4102 part 4, table 48) Fire-retardant in accordance with DIN 4102 • • With fire-resistant glazing • • With additional top panel – – With additional smoke protection • • With additional soundproofing • • With additional burglar resistance • • In stainless steel • – Standard rectangular types of glazing with glazing profiles made of steel or, optionally, aluminium or stainless steel CS 2500 x 2500 or more pedestal moulding height > 625 needed – F90 types of glazing Standard round types of glazing with glazing profiles made of steel or, optionally, stainless steel + A9 Special optional glazing, 130 x 150 to 770 x 1759, also available as multi-pane glazing, frieze widths > 237 with glazing profiles made of steel or, optionally, aluminium – or stainless steel – Approval number Z-6.20-1919 Z-6.20-1919 • possible – not possible All dimensions indicated in mm, CS = Co-ordinating size, OFD = Outer frame dimension, CP = Clear passage dimension 13
Page 1 and 2: The right door, whatever the proper
Page 3 and 4: Contents Fire-resistant doors 4 Tec
Page 5 and 6: Standard means more than just “fr
Page 7 and 8: Fire-resistant doors: Type programm
Page 9 and 10: T30-1 fire-resistant doors Technica
Page 11: T30-2 fire-resistant doors Technica
Page 15 and 16: T90-2 fire-resistant doors Technica
Page 17 and 18: Fire-resistant doors T90, single-le
Page 19 and 20: Different sill design Smokeproof do
Page 21 and 22: Smokeproof doors Double-leaf, smoke
Page 23 and 24: Choice of features Not just the sha
Page 25 and 26: Multi-purpose doors Technical data
Page 27 and 28: Transformer doors guarantee optimal
Page 29 and 30: Special doors Technical data Design
Page 31 and 32: Frames for T30 and T90 fire-resista
Page 33 and 34: Sills, anchor plans for T30 and T90
Page 35 and 36: Programme overview Fire-resistant d

The right door, whatever the property - Novoferm Norge

Create successful ePaper yourself

Delete template?

Save as template?