STAUFF Clean

Stauff Tube Clean System
Nozzles
There are four types of Nozzles currently available in the
range as described bellow, however additional nozzles can
be produced to suit specifi c applications.
Universal Nozzles
Available in sets of 10 with prefi x (UV). The Universal Nozzle is designed with a tapered seat
that will allow it to cater for 90% of applications, including, Hose, Tube and Pipe, with or without
fi ttings, in hydraulic and pneumatic pipe systems, condenser tubes, boiler tubes and food lines.
The Universal Nozzle kit fi ts all and will accommodate applications with J.I.C., S.A.E. and B.S.P.
end fi ttings.
The set of 10 nozzles consists of the following sizes: 6mm, 8mm, 10mm, 13mm, 16mm, 19mm,
25mm, 32mm, 38mm and 50mm.
Metric Tube Nozzles
Available in sets of 18 with prefi x (MT). The Metric Tube Nozzle is intended for use specifi cally
with metric sized tube and is designed to fi t over the outside of the tube or pipe being cleaned.
The inside diameter of the nozzle is reduced to match the inside diameter of the tube. The
nozzles are machined from solid bar stock and designed for superior strength.
The set consist of the following metric OD sizes: 6mm, 8mm, 10mm, 12mm, 14mm, 15mm,
16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 38mm, 42mm, 50mm and 60mm.
J.I.C. Nozzles
Available in a set of 10 nozzles with prefi x (J). The J.I.C. Nozzle is designed specifi cally for use
with J.I.C. and S.A.E. type fittings. The nozzles are machined to accommodate both male and
female confi guration, ensuring a perfect airtight seal every time.
The set consist of the following sizes: 6mm, 8mm, 10mm, 13mm, 16mm, 19mm, 25mm, 32mm,
38mm and 50mm.
BSP Nozzles
Nozzle Sets
Available in a set of 7 nozzles with prefi x (B). The BSP Nozzle is designed specifi cally for BSP
confi guration fi ttings. The nozzles are machined to accommodate both male and female
confi gurations, ensuring a perfect airtight seal every time.
The set consist of the following sizes: 6mm, 10, 13mm, 16mm, 19mm, 25mm and 32mm.
Safety note: A mesh collection bag should be secured to the pipe exit to avoid possible
injury to personnel by the projectile exiting at high velocity.
Safety note: Always wear protective safety glasses and ear protection when operating
this device.
4