Download complete user manual (PDF). - Brocade

14
Displaying MRP information
TABLE 63
This field...
Interface role
Forwarding state
Interface Type
RHPs sent
RHPs rcvd
TC RHPs rcvd
State changes
CLI display of MRP ring information (Continued)
Displays...
The interface role can be one of the following:
• primary
• Master node – The interface generates RHPs.
• Member node – The interface forwards RHPs received on the other
interface (the secondary interface).
• secondary – The interface does not generate RHPs.
• Master node – The interface listens for RHPs.
• Member node – The interface receives RHPs.
Whether MRP Forwarding is enabled on the interface. The forwarding state can
be one of the following:
• blocking – The interface is blocking layer 2 data traffic and RHPs
• disabled – The interface is down
• forwarding – The interface is forwarding layer 2 data traffic and RHPs
• preforwarding – The interface is listening for RHPs but is blocking layer 2
data traffic
Shows if the interface is a regular port or a tunnel port.
The number of RHPs sent on the interface.
The number of RHPs received on the interface.
The number of Topology Change RHPs received on the interface.
The number of MRP interface state changes that have occurred. The state can
be one of the states listed in the Forwarding state field.
494 Multi-Service IronWare Switching Configuration Guide
53-1002820-02