Reinforced concrete is cracked concrete. Safety in a crack: The HVZ ...

Value driven
Innovative anchor design for improved
stress distribution in cracked and
non-cracked concrete
Reliable performance
Approved for use in cracked and
non-cracked concrete by the German
DIBt, approval no. Z-21.3.1578.
Fire resistance tested as per DIN
4102-2 by the IBMB, Brunswick,
Germany
Small edge distances
Considerable design flexibility,
even with narrow structural
members.
Robust foil capsule
Foil instead of glass, no breakage and
thus safe handling as well as
trouble-free storage of this unique
foil capsule.
Secure overhead fastening
The arrowhead of the foil capsule
brevents it from dropping out of the
anchor hole when fastening over
head.
Force [kN]
50
40
30
20
10
non-cracked concrete
66.7
63.1
cracked concrete
(crack width 0.3 mm)
0
0 1 2 3
Way [mm]
Safety in a crack:
The HVZ adhesive anchor programme
HVU-TZ adhesive capsule
Ordering designation for use with Item no.
HVU-TZ M10 HAS-(R)TZ M10x75 311368/5
HVU-TZ M12 HAS-(R)TZ M12x95 311369/3
HVU-TZ M16 HAS-(R)TZ M16x105 311370/1
HVU-TZ M16 HAS-(R)TZ M16x125 311370/1
HVU-TZ M20 HAS-(R)TZ M20x170 335942/9
HAS-TZ / HAS-RTZ / HAS-HCR-TZ adhesive anchor rod
with external hexagon, complete with nut and washer
Steel galvanised to 10 microns Stainless steel of A4-80 grade Highly corrosion resistant special steel (HCR)
Ordering designation Item no. Ordering designation Item no. Ordering designation Fastenable
thickness [mm]
HAS-TZ M 10x75/15 310018/7 HAS-RTZ M 10x75/15 310019/5 HAS-HCR-TZ M 10x75/15* 15
HAS-TZ M 10x75/30 308383/9 HAS-RTZ M 10x75/30 308391/2 HAS-HCR-TZ M 10x75/30* 30
HAS-TZ M 10x75/50 308384/7 HAS-RTZ M 10x75/50 308392/0 HAS-HCR-TZ M 10x75/50* 50
HAS-TZ M 12x95/25 308385/4 HAS-RTZ M 12x95/25 308393/8 HAS-HCR-TZ M 12x95/25* 25
HAS-RTZ M 12x95/40 333769/8 40
HAS-TZ M 12x95/50 308386/2 HAS-RTZ M 12x95/50 308394/6 HAS-HCR-TZ M 12x95/50* 50
HAS-TZ M 12x95/100 308387/0 HAS-RTZ M 12x95/100 308395/3 HAS-HCR-TZ M 12x95/100* 100
HAS-TZ M 16x105/30 308388/8 HAS-RTZ M 16x105/30 308396/1 HAS-HCR-TZ M 16x105/30* 30
HAS-TZ M 16x105/60 308389/6 HAS-RTZ M 16x105/60 308397/9 HAS-HCR-TZ M 16x105/60* 60
HAS-TZ M 16x105/100 308390/4 HAS-RTZ M 16x105/100 308398/7 HAS-HCR-TZ M 16x105/100* 100
HAS-TZ M 16x125/30 332519/8 HAS-RTZ M 16x125/30 332522/2 HAS-HCR-TZ M 16x125/30* 30
HAS-TZ M 16x125/60 332520/6 HAS-RTZ M 16x125/60 332523/0 HAS-HCR-TZ M 16x125/60* 60
HAS-TZ M 16x125/100 332521/4 HAS-RTZ M 16x125/100 332524/8 HAS-HCR-TZ M 16x125/100* 100
HAS-TZ M 20x170/40 335943/7 HAS-RTZ M 20x170/40 335944/5 HAS-HCR-TZ M 20x170/40* 40
*Availability on request
Setting tools for HVA and HVZ (anchor rods with external hexagon)
For use with Suitable for machine
Ordering designation with with TE-5 TE-18M TE-25 TE-35 TE-55 TE-75 Item no.
HAS-(R) HAS-(R) TZ TE-15 TE-15C TE-76
TE-C HEX M10 M10 M10 ● ● 311415/4
TE-C HEX M12 M12 M12 ● ● ● ● 1) ❍ 2) 3) 311416/2
TE-C HEX M16 M16 M16 ● ● ● 1) ❍ 2) 3) 311417/0
TE-Y HEX M20 M20 ● ● 336420/5
1)
2)
3)
use with TE-C-WZA chuck ● suitable for HAS / HAS-R and HAS-TZ / HAS-RTZ
use TE-FY-BY-C setting adaptor ❍ only suitable for HAS-TZ / HAS-RTZ
use low hammering power for HAS(-R)
HVA adhesive anchor
Available: Hilti HVA adhesive anchor for non-cracked concrete.
Z-21.3-1578
ALLGEMEIN
BAUAUFSICHTLICH
ZUGELASSEN
Hilti Corporation
FL-9494 Schaan
Principality of Liechtenstein
www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan, Liechtenstein W2285 0800 20-d 9 Printed in Liechtenstein © 2000 Technical and programme changes reserved S.E.&O.
Reinforced concrete is
cracked concrete.
Hilti HVZ adhesive anchor system
A reliable hold in
reinforced concrete:
automatic follow-up
expansion in a crack

Hilti HVZ – an anchor you can count on
The first adhesive anchor with foil capsule suitable for use in cracked concrete
Go for safety.
Reinforced concrete is cracked concrete.
That’s why fastening systems for the
tension zone of reinforced concrete must
re-expand reliably if a crack forms. The
innovative adhesive anchor system Hilti
HVZ unites pioneering expansion technology
with the adhesive anchoring principle
that’s been tried and tested a million times
over. Together, a robust, easy-to-use foil
capsule of revolutionary design and a
single-part anchor rod provide the answer
to unusually demanding fastenings in
difficult conditions.
Reliable: the application
■ Cracked tension zone of concrete
components
■ Dynamic loading, such as fatigue,
shock and seismic
■ Small edge distances and spacing
Reliable: the handling
■ Quick and easy setting operation
■ Accurate fastening design with Hilti
software
■ Insensitive to frequently made application
errors, e.g. poor hole cleaning
Reliable: the performance
■ Automatic follow-up expansion if
cracks form
■ High loading resistance, even in
cracked concrete or when edge
distance and spacing are small
■ Rods in various grades of steel and
sizes for a wide variety of applications
ALLGEMEIN
BAUAUFSICHTLICH
Protezione civile
ZUGELASSEN
Zivilschutz
Protection civile
Protecziun civila
Inspected, tested and approved
The anchor system reliable under shock
loading.
In a crack
Multiple tapers and special surface
for reliable follow-up
expansion in a crack
Optimised and tested for fatigue properties under dynamic
loading.
Cutting edge
Innovative cutting edge geometry
and multifunctional helical
taper for optimised mixing and
distribution of the adhesive
Mark of confidence
End-face marking for clear in-situ identification
of the anchor:
Quick setting thanks to hexagon drive
and TE-C HEX setting tool (Simply
attach, drive in and remove.)
Hilti safety programme
HAS-TZ steel grade 8.8, galvanised for use in dry inside rooms,
to 10 microns suitable for dynamic loading
HAS-RTZ stainless steel grade A4-80 for use outside and in damp
DIN 1.4401 rooms
HAS-HCR-TZ highly corrosion resistant for highly corrosive and aggresspecial
steel (HCR) sive surroundings (i.e. tunnels,
DIN 1.4529 indoor swimming pools, etc)
Use in tunnels
It’s uncertain where cracks might appear. It’s certain that the Hilti
HVZ system will hold, even in a crack.
An anchor rod for corrosive surroundings, the Hilti HAS-HCR-TZ is
made of highly corrosion resistant steel.
Fire in tunnels
Temperature (°C)
1200
1000
500
■ Tunnel Fire
Curve (RABT)
■ Int. Standard Temperature
Curve (ISO 834)
0 30 60 90 120 150 180
Time (min)
Responsibility for safety: the Hilti HVZ is the first anchor system
tested in tunnel fire conditions