Каталог Weidmuller: RockStar® – Heavy Duty Connectors

MixMate series – the high-capacity connectors
RockStar ® inserts
MixMate series –
the high-capacity connectors
Using the MixMate series, high rated currents and voltages can be transmitted
concurrently with signals in a very confined space. MixMate is available in threaded,
axial screw and crimp connection technology.
B
Technical data
S4 S8/24 S4/0 Axial S4/0 S4/2
Standards / approvals
Standards DIN EN 61984 DIN EN 61984 DIN EN 61984 DIN EN 61984 DIN EN 61984
DIN EN 60664-1 DIN EN 60664-1 DIN EN 60664-1 DIN EN 60664-1 DIN EN 60664-1
Approvals UL/CSA UL/CSA/VDE UL/CSA UL/CSA/VDE UL/CSA/VDE
Inserts
No. of poles
– Power contact 4 (+PE) 8 (+PE) 4 (+PE) 4 (+PE) 4 (+PE)
– Signal contact 24 2
Rated voltage
– Power contact 1000 V 400 V 690 V 830 V 830 V
– Signal contact 160 V 400 V
Rated voltage
600 V 600 V 600 V 600 V 600 V
to UL/CSA
Rated current
– Power contact 65 A 16 A 80 A 80 A 80 A
– Signal contact 10 A 16 A
Rated impulse withstand voltage
– Power contact 8 KV 4 KV 8 KV 8 KV 8 KV
– Signal contact 2.5 KV 6 KV
Pollution severity 3 3 3 (1000 V / 8 kV / 2) 3 3
Insulation resistance ≥ 10 10 Ω ≥ 10 10 Ω ≥ 10 10 Ω ≥ 10 10 Ω ≥ 10 10 Ω
Material
Glass-fibre reinforced PC (in UL Glass-fibre reinforced PC (in UL Glass-fibre reinforced PC (in UL Glass-fibre reinforced PC (in UL Glass-fibre reinforced PC (in UL
list and approved for railway
applications)
list and approved for railway
applications)
list and approved for railway
applications)
list and approved for railway
applications)
list and approved for railway
applications)
Temperature range –40 °C ... +125 °C –40 °C ... +125 °C –40 °C ... +125 °C –40 °C ... +125 °C –40 °C ... +125 °C
Flammability to UL 94 V – 0 V – 0 V – 0 V – 0 V – 0
Mechanical service life
– Plugging cycles Ag - Surface ≥ 500 ≥ 500 ≥ 500 ≥ 500 ≥ 500
– Plugging cycles Au - Surface ≥ 500
Contact resistance ≤ 1 mΩ ≤ 2 mΩ (Power) ≤ 1 mΩ ≤ 1 mΩ ≤ 1 mΩ (Power)
with min. and max. conductors ≤ 4 mΩ (Signals) ≤ 2 mΩ (Signals)
Contacts / Material
Sockets and plug-in contact Copper alloy Copper alloy Copper alloy Copper alloy Copper alloy
Surface Passivated silver Passivated silver or gold-plated Passivated silver Passivated silver Passivated silver
Flexible conductor connection
– Power contact 2.5 - 10 mm 2 (AWG 14 … 8) 0.5 - 4 mm 2 (AWG 20 … 12) 1.5 - 16 mm 2 (AWG 16 … 6) 1.5 - 16 mm 2 (AWG 16 … 6) 1.5 - 16 mm 2 (AWG 16 … 6)
– Signal contact 0.14 - 2.5 mm 2 (AWG 26 … 14) 0.5 - 2.5 mm 2 (AWG 22 … 14)
Stripping length
– Power contact 8 mm 7.5 mm 13 mm 15 mm 15 mm
– Signal contact 8 mm 8 mm
Clamping torque
– Power contact 1.1 - 1.7 Nm 2 … 3 Nm 1.2 Nm (1.5 mm²) /
2 Nm (2.5 mm²) /
3 Nm (4 - 16 mm²)
1.2 Nm (1.5 mm²) /
2 Nm (2.5 mm²) /
3 Nm (4 - 16 mm²)
– Signal contact 0.5 - 0.55 Nm
Tools
– Hexagon socket, 2 mm SW 2 SW 3
– Screwdriver 0.6 x 3.5 mm SD 0.8 x 4 mm SD 0.8 x 4 mm (Power) /
SD 0.6 x 3.5 mm or PH1 (Signals)
– Crimping tool CTIN 1.6/2.5 / CTX CM 1.6/2.5
(for 0.5 - 1.5 mm²)
PE connection
via plug/socket
– Clamping range 1.5/2.5 - 4/10 mm 2 0.5 - 6 mm² (0.5 mm² with 1.5 - 16 mm 2 with cable lug 0.5 - 16 mm² (0.5 mm² with ferrule 0.5 - 16 mm² (0.5 mm² with ferrule
ferrule)
10 - 16 mm² with ring cable lug) 10 - 16 mm² with ring cable lug)
– AWG conductor AWG 16/14 … 12/8 AWG 20 ... 10 (AWG 10 with
ring cable lug)
AWG 16 … 4
AWG 20 … 6 (AWG 10. 8 and
6 with ring cable lug)
AWG 20 … 6 (AWG 10. 8 and
6 with ring cable lug)
– Stripping length 8 mm 13 mm 8 mm (for wire up to 6 mm 2 only) 13 mm 13 mm
– Clamping torque 0.5 - 0.8 Nm 2 - 2.5 Nm 2 - 2.5 Nm 2 - 2.5 Nm 2 - 2.5 Nm
– Blade dimensions SD 0.8 x 4 mm SD 1.2 x 6.5 mm or PH 2 SD 0.8 x 4 mm or PZ 2 SD 1.2 x 6.5 mm or PH 2 SD 1.2 x 6.5 mm or PH 2
Note: When used properly and as designated, the listed connectors may not be connected or disconnected if there is a live voltage or load!
* Power contact = Axial screw connection, Signal contact = Screw connection
B.108
1282180000 – 2012/2013