Indicators/Controllers - Rice Lake Weighing Systems

INDICATORS/CONTROLLERS 

Table of Contents 

120/120 Plus......................................... 344 

Digital Weight Indicator 

IQ plus ® 210........................................... 346 


IQ plus ® 390-DC.................................. 348 

Battery Powered Digital Weight Indicator 

SURVIVOR ® 390HE............................. 350 

Hostile Environment Digital Weight Indicators 

420 Plus................................................... 352 

HMI Digital Weight Indicator 

SURVIVOR ® 420HE............................. 354 

Hostile Environment Digital Weight Indicators 

480 Legend Series........................... 356 


IQ plus ® 590-DC.................................. 358 

Battery Powered Digital Weight Indicator 

720i ........................................................... 360 

Programmable HMI Indicator/Controller 

820i ® ............................................................ 362 


880 Performance Series.............. 364 

Panel Mount Indicator/Controller 

920i ® ............................................................ 366 


920i ® USB................................................ 370 


920i ® User Programs........................ 372 

920i ® FlexWeigh Systems............. 374 

Fillers/Batchers 


Bulkweighers 


Flow Rate Controllers 

920i ® FlexWeigh Systems.............. 380 

Hand Batching 

MSI-8000HD.......................................... 381 


CW-90........................................................ 382 

Checkweigher Indicator Only 

CW-90X..................................................... 384 

Checkweigher Indicator Only 

VIRTUi ® /VIRTUi2 ® ................................ 386 

PC-Based HMI for iQUBE ® /iQUBE2 ® 

SCT-10....................................................... 387 

Signal Conditioning Transmitter/Indicator 

SCT-20....................................................... 388 


SCT-30....................................................... 389 


Relays and Racks............................... 390 

Input and Output Components/ 

Grayhill and OPTO 22 Relays 

and Racks............................................... 391 

Explosive Environment 

Equipment Policy............................... 392 

Hazardous Area 

Classification........................................ 393 

Explosive Environment 

Solutions.................................................. 394 

Hazardous Atmospheres 

(for reference only)........................... 395 

320IS.......................................................... 396 

Intrinsically Safe Digital Weight Indicator 

320IS Plus............................................... 398 


EL232 XPCD.......................................... 400 

Explosion Proof Remote Serial Display 

Intrinsic Safety Barriers................ 401 

Profibus ® DP Interface.................... 403 

Profibus DP Interface...................... 404 

ProfiNet ® Interface............................. 405 

Allen-Bradley ® Remote I/O........... 406 

Limited Supply 

DeviceNet Interface....................... 407 

DeviceNet Interface........................ 408 

ControlNet Interface...................... 409 

MODBUS-TCP ® Interface............... 410 

EtherNet/IP ® 

Protocol Card 

for AB PLC.............................................. 411 

EtherNet/IP ® for AB PLC................ 412 

Ethernet TCP/IP Interface........... 413 

ConnexLink .......................................... 414 

Wireless Radio 900 MHZ Transceivers 

XTend-PKGTM RF Modems......... 415 

EL148 HE Replacement Mettler 

Toledo Power Cell Cable............... 416 

Accessories........................................... 417 

QWERTY Style Keyboards and Aluminum Keypads 

X-Purge/Z-Purge................................ 419 

Tripp-Lite USB to Serial 

Converters.............................................. 420 

Serial Adapters 

430 Bridgesensor.............................. 421 

4-20 mA Load Cell Signal Conditioner 

437 Bridgesensor.............................. 422 

Signal Conditioner 

463 Bridgesensor.............................. 423 

Signal Conditioner 

API 4058G - 441/442 

Bridgesensors...................................... 424 

Load Cell Signal Conditioners 

Amphenol ® RJF 544.......................... 426 

Harsh Environment Ethernet Connection System 

AbleCable ® .............................................. 427 

RS 232/USB Serial Smart Cable Direct, 

Keyboard Input Direct 

go-between............................................ 428 

Data Capture and Storage 

Visit ricelake.com/spanish 

to see all RLWS materials 

available in Spanish 

Product names, logos, brands, and other trademarks featured 

or referred to within this publication are the property of their respective trademark holders.


120/120 Plus Digital Weight Indicator 

STANDARD FEATURES 

APPROVALS 

120 

120 Plus 

120 

• Large .8 in (20.3 mm) Light Emitting Diode (LED) 

Display 

• Configurable analog to digital measurement rate 

• Power for four 350 Ohms load cells 

• Primary/secondary units configuration: lb, kg, 

ounces, grams 

• Five-button operation 

• Two independent communication ports: (1) full 

duplex, (1) unidirectional or active 20 mA 

current loop 

• Standardized EDP command sets 

• Programmable ticket format up to two 

180-character printout 

• Full front-panel digital calibration and 

configuration 

• Tilt stand 

• Three-stage digital filtering 

• Consecutive transaction numbering 

• Time and date (volatile) 

120 Plus 

• Large .8 in backlit LCD display 

• Rechargeable battery and wall adapter 

• Power save feature for 700 hours of battery life 

• Ten stored tare values 

• Display hold (based on 3 second average) 

• Time and date 

Measurement 

Canada 

Approved 


SPECIFICATIONS 

Power: 

120/120 Plus: 

Line voltages: 115 or 230 VAC 

Frequency: 50 or 60 Hz 

120 Plus: (estimated battery life) 

60 hours with 1 x 350 Ω 

40 hours with 4 x 350 Ω 

Charge time 8 hours 

Excitation Voltage: 

5 VDC, 4 x 350 Ω or 8 x 700 Ω load cells 

Analog Signal InputRange: 

-0.6 mV/V - 3.0 mV/V 

Analog Signal Sensitivity: 

0.3 µV/graduation minimum, 

1.5 µV/grad recommended 

Resolution: 

Internal resolution: 

1 million internal graduations 

Display resolution: 

10,000 displayed graduations 

Measurement Rate: 

120: 30, 15, 7, 3 per second 

120 Plus: 30 per second 

System Linearity: 

Within 0.01% of full scale 

Circuit Protection: 

RFI, EMI, ESD protected 

Load Cell Connection: 

Cord grip entry 

Detachable plug (optional) 

Serial Output: 

EDP port: Full duplex RS-232 

Printer port: Output-only RS-232 or active 20 mA 

current loop 

Both ports: 9600, 4800, 2400, 1200, 600, 300 bps; 7 

or 8 data bits; even, odd or no parity 

Display: 

120: 

0.8 in (20 mm), 6-digit Red Light Emitting Diode (LED) 

display, 7-segment digits 

120 Plus: 

0.8 in (20 mm) 6-digit LCD with backlight 

7-segment digits 

Status Annunciators: 

Designators for: center of zero, stand still, gross, net, 

lb, kg, oz, g 

120 Plus: 

Battery, setpoint 1 & 2, Hold 

Keyboard: 

120: 

5-key flat membrane panel, tactile feel 

120 Plus: 

Zero, tare, present tare, hold, gross/net, units, numeric 

0-9, clear, enter/print 

Digital I/O: 

120 Plus: Requires option card 

24 volt source 

3 digital inputs 

2 digital outputs 

Operating Temperature: 

Legal: 14°F to 104°F (-10°C to 40°C) 

Industrial: 14°F to 122°F (-10°C to 50°C) 

Weight: 

2.6 lb (1.2 kg) 

Rating/Material: 

Enclosure: heavy gauge ABS 

Warranty: 

One-year limited warranty 

Approvals: 

NTEP CC 03-059, Class III/IIIL 10,000d 

Measurement Canada AM-5517, Class III/IIIHD 

10,000d 

OIML TC 7028, TC7628; T 5692 10,000 Divisions 

CE marked 

DIMENSIONS 

A 7.32 in (1863 mm) D 1.65 in (42 mm) 

B 6.06 in (154 mm) E 4.76 in (121 mm) 

C 

3.74 in (95 mm) 

344 An ISO 9001 Registered Company © 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.


120/120 Plus Digital Weight Indicator 

PART NUMBER/PRICE 

PART # DESCRIPTION 

EST. SHIP 

WEIGHT 

PRICE 

120 

131923** Desktop 115 VAC/230VAC 3 lb $325.00 

120 Plus 

103632** Desktop 115/230 VAC 3 lb 450.00 

107619** Desktop 115/230 VAC with digital I/O option 3 lb 510.00 

OPTIONS/ACCESSORIES 

PART # DESCRIPTION PRICE 

93205 

Load cell connector with 6 meter length pigtail 

(requires 103507) 

$45.00 

82505 

6-Pin socket external load cell connector 

(requires 103507) 

10.00 

103507 

External load cell plug replaces cord grip 

(requires 82505 or cable 93205) 

30.00 

107620 Digital I/O card for 120 Plus 60.00 

105670 15-Pin connector for 120 Plus 10.00 

106705 15-Pin Interface cable for 120 Plus, 2-meter length 30.00 

76699 Additional operating manual for 120 25.00 

105914 Additional operating manual for 120 Plus 25.00 

77925* Revolution ® Scale software 35.00 

Primary Component Parts for 120 

131924 Board assembly for use with internal LC connector 235.00 

78610 Overlay membrane switch 47.00 

131925** Power supply, 115 VAC/230VAC 35.00 

Primary Component Parts for 120 Plus 

103634 CPU/Display board assembly 335.00 

103635 Overlay membrane switch 47.00 

103636 Power supply, 115 VAC/230 VAC 35.00 

103637 Rechargeable Battery 75.00 

*Revolution can be downloaded for FREE at www.ricelake.com 

CEE 7/7 plug 

NEMA 5-15 plug 

**Both plugs included with power adapter 


An ISO 9001 Registered Company © 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices. 

345


IQ plus ® 

210 Digital Weight Indicator 


• Piezo switch technology with stainless steel 

buttons (zero and units) 

• Large, bold 0.8 in LED display 

• NEMA 4X stainless steel enclosure 

• Status annunciators: lb, kg, oz, g, negative, 

motion, center of zero 

• Displays units in decimals lb, kg, oz, lb & oz 

and grams 

• One full duplex RS-232 port 

• Two digital inputs for remote zero, print and units 

• PreVent breather vent 

APPROVALS 


Display: 

6-digit Light Emitting Diode (LED) display 

7-segment, 0.8 in (20 mm) digits 

Excitation: 

10 VDC 4 x 350 Ω load cells 


15, per second 

Display Resolution: 

10,000 dd maximum 

Power Consumption: 

115 VAC at 70 mA, 

or 230 VAC at 35 mA, 50-60 Hz 

Digital Inputs: 

Two inputs, TTL or switch closure, active-low 

Serial Communications: 

Full duplex RS-232, 9600, 4800, 2400, 1200 bps; 7 or 

8 databits, even, off, or no parity 


14°F to 104°F (-10°C to 40°C) 

Storage Temperature: 

14°F to 122°F (-10°C to 50°C) 

Enclosure Dimensions: 

9.5 x 6.0 x 2.75 in 

(241 x 152 x 70 mm) 

Weight: 

10 lb (4.5 kg) 

Rating Material: 

NEMA 4X/IP66, stainless steel 

Warranty: 

Two-year limited warranty 

Approvals: 

NTEP CC 00-045, Class III/IIL 10,000d 

DIMENSIONS 

A 9.50 in (241.22 mm) E 6.00 in (152.4 mm) 

B 10.03 in (254.7 mm) F 8.58 in (217.9 mm) 

C 11.67 in (296.4 mm) G 3.75 in (95.2 mm) 

D 

2.69 in (68.3 mm) 




IQ plus ® 

210 Digital Weight Indicator 

IQ PLUS 210 


EST. SHIP 

WEIGHT 

PRICE 

65137 IQ plus 210, 115 VAC 10 lb $550.00 

65138 IQ plus 210, 230 VAC 10 lb 550.00 



64640 Additional operating manual $30.00 

If ordering the two non-tactile buttons or column without a scale, refer to the replacement 

parts catalog for part number and pricing 



347


IQ plus ® 

390-DC Battery Powered Digital Weight Indicator 

APPROVALS 


• NEMA 4X/IP66-rated stainless steel enclosure 

• Large 1 in (24.5 mm), six-digit Liquid Crystal 

Display (LCD) 

• Six button operation 

• Power for four 350 Ohms load cells or eight 

700 Ohms load cells 

• Configurable units multiplier 

• Supports 4- and 6-wire load cell connections 

• EDP port for full duplex, RS-232 communications 

• Powered by 6 “C” cell alkaline batteries for 

complete portability (batteries not included) 

• AC adapter for 115 or 230 VAC power 

• Configurable standby mode that saves battery life 

• RATTLETRAP ® three-stage digital filtering 

• Piece count mode 

Measurement 

Canada 

Approved 


Power: 

9 VDC, provided by 6 “C” cell alkaline batteries or 

AC adapter 

Power consumption: (Estimated battery life) 

100 mA (100 hours with 4 x 350 Ω load cells), 

25 mA typical (300 hours with 1 load cell) 



Analog Signal Input Range: 

-2.5 mV – 22.5 mV or -.5 mV/V – 4.5 mV/V 


0.3 µV/graduation minimum 


Resolution: 

Internal resolution: 1 million counts 

Display resolution: 100,000dd 

Counting capacity: 100,000 


30, 15, 7 1/2, 3 3/4 per second 




EDP/Printer port: Full duplex RS-232 

Display: 

1.0 in (24.5 mm) 6-digit Liquid Crystal Display (LCD), 

7 segment, digits 


RFI, EMI, ESD protection 


Designators for: center of zero, standstill, gross, net, 

lb, kg, piece count 

Keyboard: 





Weight: 

3 lb (1.4 kg) 



Warranty: 


Approvals: 


Measurement Canada AM-5300, Class III/IIIHD, 

III 10,000d and IIIHD 20,000d 

CE marked 

UL & CUL listed 

DIMENSIONS 

A 11.04 in (280.4 mm) E 1.62 in (41.1 mm) 

B 9.0 in (228.6 mm) F 3.24 in (82.3 mm) 

C 5.52 in (140.2 mm) G 4.09 in (103.9 mm) 

D 6.42 in (163.1 mm) H 3.0 in (76.2 mm) 




IQ plus ® 



PART # DESCRIPTION WEIGHT PRICE 

48815 † 

IQ plus 390-DC battery powered with 

115 VAC wall adapter 

6 lb $750.00 

50064 †† 

IQ plus 390-DC battery powered with 

230 VAC wall adapter 

6 lb 750.00 

66727 

IQ plus 390-DC CE marked 

(voltage adapter sold separately) 

6 lb 725.00 

53629 † 

IQ plus 390-DC with 115 VAC wall 

adapter with quick connect 

6 lb 800.00 

53634 †† 

IQ plus 390-DC with 230 VAC wall 

adapter with quick connect 

6 lb 800.00 



65738 Livestock weighing option, AW 1.02 (not NTEP Certified) $95.00 

77925* Revolution ® scale software 35.00 

48820 Additional operating manual 25.00 

92777 Filter, PreVent vent kit 25.00 

91895 Quick Connect, female connector and cable, 17 in 7.00 

53640 Quick Connect, male connector and cable, 20 ft 36.00 

Primary Component Parts 

49978 Power supply, 115 VAC 20.00 

130185 Power supply, 230 VAC (2-Pin Europe) 35.00 

48790 Overlay membrane panel 53.00 

49954 Board assembly 475.00 

* Revolution can be downloaded for FREE at www.ricelake.com 

†† CEE 7/7 plug † NEMA 5-15 plug 



349


SURVIVOR ® 

390HE Hostile Environment Digital Weight Indicators 


• NEMA 4X Fiberglass-Reinforced Polyester 

(FRP) enclosure 

• Bold 1 in LCD 

• Universal mounting tabs (replaceable) 

• Up to 30 updates/second 

• Selectable display update rate 

• Five button operation, environmentally protected 

mechanical switches 

• Selectable units 

• One communication port, full duplex RS-232 

• RATTLETRAP ® vibration control 

APPROVALS 

Measurement 

Canada 

Approved 



5 VDC 

Load current: 60 mA maximum 

(4 x 350 Ω load cells) 


0.5 mV/V - 3.5 mV/V 


0.3 microvolts/graduations minimum 


30, 15, 7 1/2, 3 3/4 updates second 


Within 0.01% of FS 

Resolution: 


Display: selectable up to 100,000 dd 

Display: 

1 in (25 mm) LCD Display, 

Decimal point available at each digit 


Tare, entered tare, standstill, net, gross, 

center of zero, minus sign, lb, kg 

Front-Panel: 

5-button rubber-booted watertight switches 


ESD, EMI, RFI protected 


Printer port: RS-232 full duplex 

7 or 8 data bits; even, odd or no parity 

Baud rates: 300 to 19200 

Power: 


Frequency: 50/60 Hz 

Power consumption: 25 W maximum 


14°F to 104°F (-10°C to 40°C) 


NEMA 4X FRP 

Weight: 

Approximately 17 lb (7.2 kg) 

Warranty: 

Two-year limited wa rranty 

Approvals: 


Measurement Canada AM-5300 

DIMENSIONS 

A 10.50 in (267 mm) D 10.00 in (254 mm) 

B 8.50 in (216 mm) E 8.00 in (203 mm) 

C 

6.00 in (152 mm) 




SURVIVOR ® 




53517 SURVIVOR ® 390HE 115 VAC 17 lb $950.00 



30911 Additional mounting tabs (set of 4) $30.00 



76205 Board assembly, CPU/display 475.00 

100065 AC power supply 89.00 



351


420 Plus HMI Digital Weight Indicator 

APPROVALS 

Measurement 

Canada 

Approved 


• Large .8 in (20.3 mm) LED Display 

• Full numeric keypad 

• NEMA 4X/IP66 stainless steel washdown 

enclosure 

• Power for eight 350 ohms load cells or 

16, 700 ohms load cells 

• Configurable analog to digital measurement rate 

• Primary/secondary units configuration: lb, kg, 

ounces, short tons, metric tons, grams or none 

• Two independent communication ports: 

(2) full duplex, (1) unidirectional active 20 mA 

current loop 

• Standardized EDP command sets 

• Programmable ticket formats up to three 

300-character printouts 

• Full front-panel digital calibration 

and configuration 

• Universal mounting stand 

• Three-stage digital filtering 

• Consecutive transaction numbering 

• Two digital inputs, two digital outputs 


• Count mode 

• Two setpoints 

• Keyed tare 

• Accumulator 


Power - AC: 

Line voltages: 115/230 VAC 


Power consumption: 1.5 A at 115 VAC (8 W) 

0.75 A at 230 VAC (8 W) 

Power - DC: 

Line voltages: 9-36 VDC DC input 

Power consumption: 1.5 A Max 


+5 VDC 8 x 350 Ω or 16 x 700 Ω load cells 


-0.5 mV/V - 4.5 mV/V 


0.3 µV/graduation minimum, 


Resolution: 

Internal resolution: 8 million internal graduations 

Display resolution: 100,000 displayed graduations 


60, 30, 15, 7 1/2, per second 




2 inputs with 8 functions 

2 outputs, 250 mA max sink 




EDP port: Full duplex RS-232 

Printer port: Full duplex RS-232 or simplex 

active 20 mA current loop 

Both ports: 38400, 19200, 9600, 4800, 2400, 1200, 

600, 300 bps; 7 or 8 data bits; even, odd, or no parity 

Display: 

0.8 in (20 mm), 6-digit Super Red Light Emitting Diode 

(LED) display, 7-segment, digits 


Designators for: center of zero, stand still, gross, net, 

lb, kg, count, tare 

Keyboard: 

21-key flat membrane panel 




Weight: 

6.1 lb (2.8 kg) 


Enclosure: NEMA 4X/IP66, heavy gauge 

stainless steel 

Warranty: 


Approvals: 


Measurement Canada AM-5554, Class III/IIIHD 

10,000d 

OIML TC7004, 10,000d, 


CE marked 


DIMENSIONS 

A 9.50 in (24 mm) F 8.57 in (217 mm) 

B 10.02 in (254 mm) G 6.00 in (152 mm) 

C 11.80 in (299 mm) H 3.25 in (82 mm) 

E 3.12 in (79 mm) 3.0 in (76.2 mm) 



420 Plus HMI Digital Weight Indicator 



85124 † 420, 115 VAC 10 lb $750.00 

85125 † 420, 230 VAC 10 lb 750.00 

85126 †† 420, 230 VAC CE marked/OIML approved 10 lb 750.00 

85656 420, 9-36 VDC nominal 10 lb 850.00 

88652 420 Plus, 115 VAC w/quick connect 10 lb 800.00 

88653 420 Plus, 230 VAC w/quick connect 10 lb 800.00 



85659 Analog output: selectable 0-10V, 4-20 mA $300.00 

52948** Panel mount kit 125.00 

77925* Revolution ® scale software 35.00 



91895 Quick Connect, female connector and cable, 17 in 7.00 

53640 Quick Connect, male connector and cable, 20 ft 36.00 




76556 Power supply, auto switching 50.00 

97475 DC/DC converter, 9-36 VDC 150.00 

85791 Fuse, 2.5 A, 5 x 20 mm 3.15 


** Panel mount kit is not NEMA rated, consult factory for modifications. 




353


SURVIVOR ® 



• NEMA 4X Fiberglass-Reinforced Polyester (FRP) 

enclosure 

• Bright, 2 in LED display 

• Universal mounting tabs (replaceable) 

• Up to 60 updates/second 

• Selectable display update rate 

• Five button operation, environmentally protected 

mechanical switches 

• Two communication ports, full duplex RS-232 

• RATTLETRAP ® vibration control 

APPROVALS 

Measurement 

Canada 

Approved 



5 VDC 

Load current:115 mA maximum 



0.5 mV/V - 3.5 microvolts/V 


0.3 mV/V/graduations minimum 


60,30,15,7 1/2 updates second 


Within 0.01% of FS 

Resolution: 


Display resolution: Selectable up to 100,000dd 

Display: 

2 in (50 mm) LED Display, 

Decimal point available at each digit 


Tare, entered tare, standstill, net, gross, 

center of zero, minus sign, lb, kg 

Front-Panel: 

5-button rubber-booted watertight switches 


ESD, EMI, RFI protected 


Printer port: RS-232 full duplex 20 mA simplex 

EDP Port: RS-232 full duplex 

Baud rates: 300 to 38,400 

7 or 8 data bits; even, odd or no parity 

Power: 



Power consumption: 25 W maximum 


2 inputs, TTL or switch closure, active low 

Digital Outputs: 

2 outputs, 250 mA max sink 

Operating Temperatures: 

14°F to 104°F (-10°C to 40°C) 


NEMA 4X FRP 

Weight: 


Warranty: 

Two-year limited wa rranty 

Approvals: 



DIMENSIONS 

A 12.50 in (317.5 mm) D 14.94 in (379.4 mm) 

B 10.50 in (266.7 mm) E 10.00 in (254 mm) 

C 

8.28 in (210.3 mm) 




SURVIVOR ® 




87959 † SURVIVOR 420HE 115 VAC 18 lb $1,600.00 

87960 † SURVIVOR 420HE 230 VAC 18 lb 1,600.00 



30911 Additional mounting tabs (set of 4) $30.00 




87958 Board assembly, CPU 500.00 


87808 Board display, 2 in LED 350.00 

87971 Switch assembly, 6 push button 125.00 

87968 Front panel overlay 53.00 

† NEMA 5-15 plug 



355


NEW 

480 Legend Series 


APPROVALS 


• Large 0.8 in LED display 

• Time and Date, battery backed 

• Nema 4X/IP66 stainless steel washdown 

enclosure 

• Password protection for user and configuration 

changes 

• Operator functions through menu key for Audit 

Trail, Preset Tare, Unit ID, Accumulator, Time & 

Date, Setpoints, Serial Communications, and 

Print Formats. 

OPTIONS 

• Analog Output, 0-10 VDC, 4-20 mA, selection for 

20% Offset 

• Two independent serial ports, RS-232 and 20 mA 

• Programmable ticket formats for Gross, Net, 

Accumulator, and Setpoints 

• Local/Remote operation 

• Hardware or Audit Trail sealed 

• Filter settings for light, medium and heavy noise 

• Selectable Conversion Rate and Display Update 

Rate 

• Eight Setpoints, sequenced batch engine 

• Relay output, two digital inputs, two dry contact 

relays (supports two boards) 

Measurement 

Canada 

Approved 



Power: 

Line voltages: 115 - 230 VAC 


Power consumption: 70 mA at 115 VAC, 

35 mA at 230 VAC with (10) 350Ω load cells 


5 VDC, 10 x 350Ω load cells 


±7 mV/V 


0.1uV/graduation minimum, 

0.5uV/graduation recommended 

Resolution: 

Internal: 523,000 counts 

Display: 

100,000 displayed graduations 


Selectable 5, 10, 20, 40 Hz 




2 inputs (requires relay output option). Primary keys, 

Pseudo functions, Batching functions 

A 

F 

G 

D 

E 


Immunity 10 V/m 

ESD ± 10 KV air ± 6 KV contact 

RFI Protection: 

Capacitor bypass and ESD suppressors 


Com 1: RS-232 full duplex 

Com 2: RS-232 full duplex or 20 mA simplex 

Both ports 1200, 2400, 4800, 9600, 19200, 38400 

baud 7 or 8 data bits, even, odd or no parity 

Display: 

0.8 in (20 mm), 6-digit super red LED display, 

7-segment digits 


Gross, Net, Center of Zero, Standstill, lb, kg, Tare, 

Preset Tare 

Keyboard: 

Flat membrane panel, embossed keys, tactile feel 

Analog Output Option: 

16-bit resolution, Voltage Output 0-10 VDC, current 

output 0-20 mA / 4-20 mA 

Relay Board Option: 

(2) Opto-isolated, 5 to 24 VDC, active high inputs 

(4) 30 VDC, 2 Amp dry-contract relays, 




Weight: 

6.4 lb (2.9 kg) 


Enclosure: NEMA 4X/IP66, heavy gauge 

stainless steel 

Warranty: 


Approvals: 

Measurement Canada AM-5892, 

Accuracy Class III/IIIHD, 10 000d 

NTEP CC 12-123, 

Accuracy Class III/IIIL, 10 000d 

OIML R76/2006-NL1-12.48, T5692, TC8322 

Accuracy Class III, 10 000d 

CE Marked 

DIMENSIONS 

A 9.50 in (241 mm) E 2.75 in (70 mm) 

B 10.00 in (254 mm) F 7.00 in (177 mm) 

C 11.00 in (279 mm) G 6.00 in (152 mm) 

D 3.65 in (92 mm) H 3.75 in (95 mm) 

B 

H 

C 



NEW 

480 Legend Series Digital Weight Indicators 



126564 † 480-2A, 115–230 VAC 10 lb $625.00 

126565 †† 480-2A, 230 VAC 10 lb 625.00 

130338 † 

130339 †† 

130340 † 

130341 †† 

480-2A with analog output, 115 – 230 VAC 

(Includes part numbers: 131340 & 131341) 

480-2A with analog output, 230 VAC 


480-2A with relay board, 115 – 230 VAC 


480-2A with relay board, 230 VAC 


10 lb 950.00 

10 lb 950.00 

10 lb 900.00 

10 lb 900.00 



131340 Mounting bracket for option boards 1 lb $30.00 

131341 Analog output, 0-10VDC, 4-20mA 1 lb 300.00 

131342 

Relay board, 2 digital inputs, 

4 dry contact outputs 

1 lb 250.00 

151100 A/D Sealing Kit, used with Audit Trail Tracking 1 lb 30.00 

151099 Panel mount bezel (not NEMA rated) 4 lb 125.00 

83564 Clear protective overlay (package of five) 1 lb 60.00 

77925* Revolution scale software 1 lb 35.00 

119201 Installation manual 1 lb 25.00 

Primary Replacement Components 

131345 Overlay, 6-Key, red window 1 lb 55.00 

131346 Display board, LED 1 lb 125.00 

131316 Power supply, 85-265VAC 1 lb 50.00 

131318 CPU board 1 lb 225.00 

131319 A/D board 1 lb 175.00 



Euro plug 



357


IQ plus ® 


APPROVALS 


• Full numeric keypad 

• Keyboard entry of piece weight, tare weight, 

calibration and sample size 

• Display tare button 

• Powered by 6 “C” cell alkaline batteries for complete 

portability (batteries not included) 

• Three 300-character print ticket formats 

• Power for four 350 Ohms load cells or eight 

700 Ohms load cells 

• Supports 4- and 6-wire load cell connections 

• EDP port for full duplex, RS-232 communications 

• NEMA 4X/IP66-rated stainless steel enclosure 

• Large 1 in (24.5 mm), six-digit Liquid Crystal 

Display (LCD) 

• AC adapter for 115 or 230 VAC power 

• Configurable standby mode to prolong battery life 

• RATTLETRAP ® three-stage digital filtering 

• Configurable units multiplier 

• Configurable analog-to-digital measurement rate 

• Self-resetting thermal fuse 

Measurement 

Canada 

Approved 


Power: 

9 VDC, provided by 6 C-cell alkaline batteries 

or AC adapter 


100 mA (100 hours with 4 load cells) 

25 mA (300 hours with 1 load cell) 




-2.5 mV – 22.5 mV 




Resolution: 


Display resolution: 100,000 dd 

Counting Capacity: 

100,000 pieces 


30, 15, 71/2, 33/4 per second 




EDP/Printer port: Full duplex RS-232 

Display: 

1 in (24.5 mm) 6-digit Liquid Crystal Display (LCD) 



Annunciators: 

Units (lb/kg), piece count mode (PC), gross, net, 

standstill, center of zero, tare, low battery 

Keyboard: 





Weight: 

6.5 lb (2.95 kg) 



Warranty: 


Approvals: 


Measurement Canada AM-5300, Class III at 10,000d, 

Class IIIHD 20,000d 

CE marked 

UL & C-UL listed 


DIMENSIONS 

A 11.0 in (280 mm) F 3.2 in (82 mm) 

B 9.0 in (229 mm) G 4.1 in (104 mm) 

C 6.5 in (166 mm) H 2.9 in (73 mm) 

D 7.5 in (190 mm) I 2.9 in (73 mm) 

E 

1.6 in (41 mm) 



IQ plus ® 



PART # 

52486 † 

52485 †† 

66728 

53630 

53633 

DESCRIPTION 

IQ plus 590-DC, battery powered w/115 VAC 

wall adapter 

IQ plus 590-DC battery powered w/230 VAC 

wall adapter 

IQ plus 590-DC, CE marked 

(voltage adapter sold separately) 

IQ plus 590-DC with 115 VAC wall adapter 

with quick connect 

IQ plus 590-DC with 230 VAC wall adapter 

with quick connect 

EST. SHIP 

WEIGHT 

PRICE 

6.5 lb $800.00 

6.5 lb 800.00 

6.5 lb 775.00 

6.5 lb 850.00 

6.5 lb 850.00 



77925* Revolution ® scale software $35.00 


83566 Clear protective overlay (package of five) 60.00 



49978 Power supply, 115 VAC 20.00 

130185 Power supply, 230 VAC (2-Pin Europe) 35.00 







359


720i 


Universal 


• LCD display size: panel mount (3.8 in x 1.2 in), 

universal (5.3 x 1.5 in) 

• Four soft keys 

• Truck in/out, 1,000-ID memory 

• Process control engine ProAction PCE define 

conditions and actions 

• Data storage onboard, ProAction DBE 

user-defined 

• Eight Digital I/O (expandable) 

• One option slot for pluggable options 

• (20) Auxiliary print formats 

• Time & date 

• Audit trail tracking and alibi storage 

• Peak hold 

• Rate of change 

• Accumulator 

• Multi-range/interval 

• Local/remote 

• Two full duplex serial ports 

• One PS-2 keyboard port 

• Header for fiber optic, Ethernet or USB 

Panel Mount 

CPU Enclosure 

APPROVALS 

Measurement 

Canada 

Approved 



Power: 

Line voltages: 115 or 230 VAC, 


Power consumption: 25 watts maximum 




-10 mV to +45 mV 


0.3 µV/graduation minimum at 7.5 Hz 

1.0 µV/graduation typical at 120 Hz 


A/D Sample Rate: 

7.5 to 960 Hz, software selectable 

Resolution: 

Internal resolution: 8 million counts/8,000,000 23 bit 

Weight display resolution: 9,999,999 


± 0.01% full scale 

Digital I/O: 

Eight channels on CPU board; optional 

24-channel I/O 



Serial Ports: 

Two ports on CPU board support up to 115,200 

bps; optional dual-channel serial expansion boards 

available 

Port 2: Full duplex RS-232 with handshaking 

Port 4: Full duplex RS-232, simplex 20 mA output 

PS-2 Keyboard port hard wired (Scan Code 1) 

Optional Communication: 

Ethernet TCP/IP 

RS-485-4 wire 

Fiber optic 

USB 

Display: 

Viewable area: 

Panel mount 3.8 x 1.2 in (96 x 30 mm) 

Universal 5.3 x 1.5 in (133 x 39 mm) 

240 x 64 pixel, Transflective VGA Liquid Crystal 

Display (LCD) module with adjustable contrast 

Keyboard: 

10-key (panel mount) membrane panel, 

22- key (universal mount) membrane 

panel tactile feel, 

720i will support an external keyboard 


Legal: 14°F to 104°F (-10°C to 40˚C) 

Industrial: 14°F to 122°F (-10°C to 50˚C) 

Weight: 

Universal enclosure: 9.5 lb (4.3 kg) 

Panel Mount enclosure: 8.5 lb (3.9 kg) 



Warranty: 


Approvals: 


Measurement Canada AM 5426 10,000d Class III/IIIHD 

OIML UK 2893 6,000/10,000d 

CE marked 

UL /CUL listed (universal) 

UL recognized (panel mount) 

ROHS compliant 



720i 




EST. SHIP 

WEIGHT 

PRICE 

101230 † 720i Universal 115/230 VAC 12 lb $1,200.00 

103459 †† 

720i Universal 115/230 VAC, 

CE/OIML marked 

12 lb 1,200.00 

107708 720i Universal, 9-36 VDC Nominal 12 lb 1,300.00 

101229** 720i Panel Mount 115/230 VAC 12 lb 1,200.00 

119116** 

720i Panel Mount 115/230 VAC, 

CE/OIML marked 

12 lb 1,200.00 

107710 720i Panel Mount, 9-36 VDC Nominal 12 lb 1,300.00 

115447 † 720 Universal 115/230 VAC batch software 12 lb 1,200.00 

115448 †† 

720 Universal 115/230 VAC 

CE/OIML marked with batch software 

12 lb 1,200.00 

115449 

720 Panel Mount 115/230 VAC 

with batch software 

12 lb 1,200.00 

.62 

2X .50 

10.50 

7.36 1.60 

6.12 

7.36 

720i Panel Mount Display 

NOTE: 720i CPU enclosure measures 12.75 in (L) x 6.05 in (W) x 2.14 in (H) 

7.25 

9.66 

.59 

.44 3.51 

2.31 

2.45 

3.88 



PRICE 

Option Cards 

67601 Digital I/O, 24-channel $250.00 

67602 Analog output: selectable 0-10 V, 0-20 mA 300.00 

67604 Serial, dual channel 300.00 

93245 USB Port (PC connection only-replaces serial port 2) 125.00 

Network Cards 

77142 Ethernet TCP/IP Port (replaces serial port 2) 400.00 

71986 Ethernet TCP/IP module (installed in option slot) 400.00 

87803 Ethernet IP (specifically for A-B PLC) 800.00 

108671 Wireless LAN Card 802.11 A/B 550.00 

68539 Allen-Bradley Remote I/O interface (limited supply) 650.00 

68540 Profibus ® DP interface 650.00 

68541 DeviceNet interface 650.00 

Hardware 

15436 Power cord for panel mount NEMA 5-15 plug 17.00 

105382 Power cord for panel mount CEE 7/7 plug 17.00 

96736 Fiber optic board (replaces serial port 2) 200.00 

93359 PS/2 Keyboard 35.00 

92777 Filter PreVent vent kit 25.00 

19369 Start/stop switch box 300.00 


118975 Panel mount kit, for Universal 150.00 

30549 Relay rack 150.00 

Manuals & Software 

103121 Installation manual 25.00 

104033 720i toolkit CD 35.00 

107622 720i ProAction Simulator CD 295.00 


106788 CPU board assembly 750.00 

101244 LCD Display (panel mount) transflective 125.00 

102888 LCD Display (universal) transflective 125.00 

101239 Display board (with display for panel mount) 300.00 

102887 Display board (w/o display for universal) 250.00 


97474 DC/DC converter 9-36 nominal, 25 watt 150.00 

101256 Switch membrane for panel mount 55.00 

101257 Switch membrane for universal 65.00 

*DC/DC converter installed option, requires serial tag charge, not UL approved 

**Power cord sold separately 



2X 4.25 

5.25 

2X 2.40 2X 6.00 

4X .28 

720i Universal 


361


820i ® Programmable HMI Indicator/Controller 


Universal 

• Large (4.6 in W x 2.2 in H, 320 x 156 pixel) 

back-lit LCD display 

• Weight display from .5 in to .75 in 

• Display up to two scales 

(scale 1, scale 2 and total) 

• Five user-defined soft keys 

• Weight or millivolt calibration with linearization 

and geographical compensation 

• NEMA 4X/IP66 stainless steel enclosure 

• Selectable A-D measurement rate up to 

960/second 

• Power for 16, 350 ohm load cells 

• 100 setpoints, latched or free-running 

• Multi-range/Internal 

• Peak Hold, Rate of Change 

• Audit Trail Tracking and Alibi Software 

• One option slot for pluggable options 

• 1000 - ID truck register for in/out weighing 

• User programmable 256K flash memory 

• Onboard data storage 190K 

• Downloadable programs 

• Visual programming for easily creating 

custom programs 

• Eight digital I/O 

Panel Mount 

APPROVALS 

Measurement 

Canada 

Approved 



Power: 

Line voltages: 115 or 230 VAC, 


Power consumption: 25 watts maximum 




-10 mV to +45 mV 







Resolution: 

Internal resolution: 8 million counts/8,000,000 23 bit 




Digital I/O: 

Eight channels on CPU board; optional 

24-channel I/O expansion boards available 



Serial Ports: 

Two ports on CPU board support up to 115,200 


available 

Port 2: Full duplex RS-232 with handshaking 

Port 4: Full duplex RS-232, 2-wire, 

RS-485, 20 mA output 

External keyboard port 

Optional Communication: 


RS-485-4 wire 

Fiber optic 

USB 

Display (W x H): 

Viewable area: 4.6 in x 2.2 in (116 mm x 55 mm), 320 

x 156 pixel VGA Liquid Crystal Display (LCD) module 

with adjustable contrast. 

Transmissive display- standard 

Transflective display - option 

Keyboard: 

28-key membrane panel, tactile feel, 820i will support 

an external keyboard connection 


Legal: 14°F to 104°F (-10°C to 40˚C) 

Industrial: 14°F to 122°F (-10°C to 50˚C) 

Dimensions (W x H x D): 

Universal: 10.5 x 11.2 x 4.5 in 

(266 x 217 x 114 mm) 

Panel Mount: 11.6 x 9.2 x 5.2 in 

(294 x 231 x 127 mm) 

Weight: 





Warranty: 


Approvals: 


Measurement Canada AM-5426 Class III/IIIHD 

10,000d 

OIML UK 2658, 6,000/10,000d 

CE marked 

UL /CUL listed (universal) 

UL recognized (panel mount) 

ROHS compliant 


Display 


820i ® 




EST. SHIP 

WEIGHT 

PRICE 

Single Channel 

91995 † 820i Universal, 115 VAC 10 lb $1,500.00 

91996 † 820i Universal, 230 VAC 10 lb 1,500.00 

91997 †† 820i Universal, 230 VAC CE/OIML 10 lb 1,500.00 

107711 820i Universal, 9-36 VDC nominal 10 lb 1,600.00 

93424 † 820i Panel Mount, 115 VAC 9 lb 1,500.00 

98280 †† 820i Panel Mount, 230 VAC, CE/OIML 9 lb 1,500.00 

107712 820i Panel Mount, 9-36 VDC nominal 9 lb 1,600.00 

Dual Channel 



93013 †† 820i Universal, 230 VAC CE/OIML 10 lb 1,600.00 

93425 † 820i Panel Mount, 115 VAC 9 lb 1,600.00 

98281 †† 820i Panel Mount, 230 VAC, CE/OIML 9 lb 1,600.00 

10.38" 

BACK VIEW 

11.56" 

9.16" 

820i Panel Mount 

5.20" 

7.95" 



PRICE 

Option Cards 

67601 Digital I/O, 24-channel $250.00 

67602 Analog output: selectable 0-10V, 0-20 mA 300.00 

103138 

Analog output, dual channel 0-10V, 0-20 mA 

(requires version 1.04) 

500.00 

67604 Serial, dual channel 300.00 

87697 Analog input +/-10 VDC, 0-20 mA & thermocouple 400.00 

93245 USB Port (PC connection only-replaces serial port) 125.00 

Network Cards 

77142 Ethernet TCP/IP Port (serial port 2 header) 400.00 

65383 Ethernet thin server (external) 295.00 

71986 Ethernet TCP/IP module (installed in option slot) 400.00 

98057 Wireless LAN card 802.11 B/G (installed in option slot) 650.00 

108671 Wireless LAN card 802.11 A/B (serial port 2 header) 550.00 




87803 EtherNet IP (specifically for A-B PLC) 800.00 

103136 ControlNet interface 1,000.00 

Hardware 

154077 Scanner, DS457-SR, RS-232, requires power source 600.00 

96736 Fiber optic board 200.00 

93359 PS/2 keyboard 35.00 


92777 Filter PreVent vent kit 25.00 

19369 Start/stop switch box 300.00 

100758 

Sunlight viewable display, transflective installed option, 

replaces transmissive display 

265.00 

Manuals and Software 


77925 Revolution ® scale software 35.00 

93019 IRITE IDE software (version 1.0 included with indicator) 95.00 


102331 CPU board assembly-single channel 895.00 

102333 CPU board assembly-dual channel 995.00 

93246 Display board assembly 265.00 

67613 Power supply assembly, 25 watt 130.00 

97474 DC/DC converter, 9-36 VAC, nominal, 25 watt 150.00 

93247 Switch panel membrane 68.00 

Relay products can be found on page 363 



820i Universal Mount 


363


NEW 880 Performance Series 

Panel Mount Indicator/Controller 


• LED Display, 0.56 inch (14 mm), 14 segment 

• RS-232 or RS-485 Serial Port 

• USB Device 

• Ethernet TCP/IP 

• AC or DC models 

• Built-in DIN-rail clips on controller box 

• Display and controller can be separated 

up to 250 ft 

• Hardware slot for one option card 

• Operator functions through Menu key for 

Audit Trail, Preset Tare, Accumulator, Time & Date 

and Setpoints 

• Audit trail tracking for configuration and 

calibration changes. Password protection for user 

and configuration changes. 

• 20 Setpoints with latched batch engine or 

unlatched outputs 

• Four onboard digital I/O channels 

• Programmable ticket formats up to 1000 

characters for Header Text, Gross, Net, 

Accumulator, and Setpoints 

• Local/Remote operation 

• Multi range or multi interval weighing 

• Filter settings for light, medium and heavy noise 


APPROVALS 

• Analog output, 0-10 V DC, 0-20 mA, 4-20 mA 

• Relay output, four dry contact relays normally 

open (SPST) 

• Interface for ProfiNet ® , Profibus ® , Modbus TCP ® , 

EtherNet/IP , and DeviceNet ® protocols 

• Metrological hardware sealing kit 

• Adapter plate for converting 310A and 520 panel 

mounts 

Measurement 

Canada 

Approved 

Pending 


Pending 

Pending 


Power: 

Input voltages: 100-240 VAC, 9-36 VDC 

Input Frequency: 47-63Hz 


AC: 15 watts; DC: 20 watts 


10 VDC 

8 x 350 Ω (16 x 700 Ω) load cells 


-45 mV to 45 mV 


0.3 μV/graduation minimum at 7.5 Hz 

1.0 μV/graduation typical at 120 Hz 

4.0 μV/graduation typical at 960 Hz 



Resolution: 

Internal: 8 million counts/ 

8,000,000 23 bit 

Weight display: 100,000 


± 0.01% Full Scale 

Digital I/O: 

Four I/O Onboard 

Primary keys, pseudo functions, 

batching functions 


18 KV, 10 V/meter 

Communication Ports: 

RS-232 Full Duplex or 

RS-485 Half Duplex 

USB Type A Connector 2.0 (firmware upate required) 

USB Micro A/B Connector 2.0 


Display: 

LED, Six 0.56 inch (14 mm), 

14 Segment with Decimal or Comma 


Gross, Net, Center of Zero, Standstill, 

lb, kg, Tare, Preset Tare, Range 1/2/3 

Keyboard: 

Flat membrane panel, tactile feel 

OPTIONS 

Analog Output: 

16-bit resolution, Voltage Output 0-10 VDC, 

Current Output 0-20 mA, 4-20 mA 

Relay Board: 

(4) Dry Contract Relays 

DC Max: 30 VDC at 3 Amps per contact 

AC Max: 250 VAC at 3 Amps per contact 

EtherNet/IP Interface: 

According to EN 50325-2 

ProfiNet Interface: 

According to IEC 61784 (CPF-3/3) 

Modbus/TCP Interface: 

Up to eight bytes of I/O data 

100 Mbps full duplex Ethernet 

DeviceNet Interface: 

According to EN 50325-2 

Profibus DP Interface: 

According to EN 50170 


Legal: 

14°F to 104°F (-10°C to 40˚C) 

Industrial: 

14°F to 122°F (-10°C to 50˚C) 


6.00 x 4.00 x 4.95 in 

(152 x 102 x 126 mm) 

Weight: 

2.5 lb (1.2 kg) 

Rating: 

Display Bezel NEMA 4X, IP69K 

Material: 

Display: Stainless Steel 

Controller: Aluminum 

Warranty: 


Approvals: 

NTEP CC 13-080 

Accuracy Class III/IIIL, 10,000d 

Measurement Canada (Pending) 

Accuracy Class III/IIIHD, 10,000d 

OIML (Pending) 

CE Mark 

UL Recognized (Pending) 



NEW 

880 Performance Series Panel Mount Indicator/Controller 



EST. SHIP 

WEIGHT 

PRICE 

AC Powered* 

150678 880, 115-230 VAC with display 4 lb $995.00 

151672 880 controller only 115-230 VAC 4 lb 700.00 

157989 880, 115-230 VAC with Analog Output 4 lb 1,295.00 

157990 880, 115-230 VAC with Relay Board 4 lb 1,295.00 

157991 880, 115-230 VAC with EtherNet/IP 4 lb 1,545.00 

157992 880, 115-230 VAC with ProfiNet 4 lb 1,545.00 

157994 880, 115-230 VAC with Modbus/TCP 4 lb 1,545.00 

157993 880, 115-230 VAC with Profibus DP 4 lb 1,545.00 

157995 880, 115-230 VAC with DeviceNet 4 lb 1,545.00 

DC Powered* 

150679 880, 9-36 VDC with display 4 lb 1,095.00 

151673 880 Controller only 9-36 VDC 4 lb 800.00 

Consult 880, 9-36 VDC with Analog Output 4 lb 1,395.00 

Consult 880, 9-36 VDC with Relay Board 4 lb 1,395.00 

Consult 880, 9-36 VDC with EtherNet/IP 4 lb 1,645.00 

Consult 880, 9-36 VDC with ProfiNet 4 lb 1,645.00 

Consult 880, 9-36 VDC with Modbus/TCP 4 lb 1,645.00 

Consult 880, 9-36 VDC with Profibus DP 4 lb 1,645.00 

Consult 880, 9-36 VDC with DeviceNet 4 lb 1,645.00 

*Power cable not included 

**Required for mounting display remotely from controller 



EST. SHIP 

WEIGHT 

PRICE 

151674* 880 Display only 2 lb $300.00 

153883** 6-Pin connector for display port 1 lb 15.00 

156964 Analog output, 0-10VDC, 0-20mA, 4-20mA 1 lb 300.00 

156965 Relay board, 4 dry contact outputs 1 lb 300.00 

156554 EtherNet/IP Interface 1 lb 550.00 

156555 ProfiNet Interface 1 lb 550.00 

156557 Modbus/TCP Interface 1 lb 550.00 

156558 DeviceNet Interface 1 lb 550.00 

156556 Profibus DP Interface 1 lb 550.00 

153660 Metrological sealing kit 1 lb 30.00 

158404 Adapter plate for IQ310 and 520 replacement 1 lb 45.00 

77925 Revolution scale software 1 lb 35.00 

152240 Operators manual 1 lb 25.00 

158387 Technical manual 1 lb 25.00 

Cables 

15436 Power cord, pigtail 1 lb 17.00 

105382 Power cord, 230 VAC 1 lb 17.00 

152434 Cable,USB A to micro A Shielded, 2 Meters L 1 lb 35.00 

156817 

Cable, Ethernet TCP/IP CAT.5E Shielded RoHS 

compliant Blue RJ45 connectors 1 meter 

1 lb 30.00 

156818 



1 lb 37.00 

156821 



1 lb 45.00 


131740 Overlay, 6-Key, red window 1 lb 50.00 

131598 Display Board, LED 1 lb 195.00 

131599 Power Supply, 85-265 VAC 1 lb 150.00 

153510 Power Supply, 9-36 VDC 1 lb 250.00 

131597 CPU Board 1 lb 495.00 



365


920i ® 



Deep Universal 

Panel Mount 

Universal 

• Large (4.6 W x 3.4 in H, 320 x 240 pixel) backlit 

LCD graphical display 

• Selectable character sizes from 0.25 to 1.2 in 

• 60 configurable operator prompts 

• Display up to four scale channels per screen with 

required Legal for Trade information 

• 32 scale accumulators 

• Five soft keys with 10 user-defined, 14 preset 

functions per screen 

• Ten programmable display screens 

• Millivolt calibration, 5-point linearization and 

geographical calibration 

• NEMA 4X/IP66 stainless steel enclosure 

• Selectable A/D measurement rate up to 960/ 

second 

• 100 setpoints, 30 configurable setpoint types 

• Two slots for option cards 

• 1,000-ID truck register for in/out weighing 

• 64K user on-board NV RAM 

• User programmable 128K flash memory 

• Reflash memory to upgrade firmware 

• Power for 16, 350 Ohms load cells per A/D board 

• Local-remote indicators 

• Multi range/interval 

• Alibi storage 

• Audit trail tracking 

• Peak hold 

• Rate of change 

APPROVALS 

Wall Mount 

Measurement 

Canada 

Approved 



Power: 



Power consumption: 340 mA, maximum at 115 VAC 

(26 W) 240 mA at 230 VAC (26 W) 


10 ± VDC, 16 x 350 Ω or 32 x 700 Ω load cells 

per A/D card 


-10 mV to +45 mV 







Resolution: 





Digital I/O: 

Six I/O channels on CPU board; optional 24-channel 

I/O expansion boards available 



Serial Ports: 

Four ports on CPU board support up to 115,200 


available 

Port 1: Full duplex RS-232 

Port 2: RS-232 with CTS/RTS; PS/2 keyboard interface 

via DB-9 connector 

Port 3: Full duplex RS-232, 20 mA output 

Port 4: Full duplex RS-232, 2-wire RS-485, 

20 mA output 


4.6 in x 3.4 in (116 W x 86 mm H), 320 x 240 pixel 

VGA Liquid Crystal Display (LCD) module with 

adjustable contrast. Transmissive display, standard. 

Transflective display, option. 

Keyboard: 

27-key membrane panel, tactile feel, PS/2 port for 

external keyboard connection 


Legal: 14°F to 104°F (-10°C to +40˚C) 

Industrial: 14°F to 122°F (-10°C to +50˚C) 

Weight: 


Wall Mount enclosure: 23.0 lb (10.4 kg) 


Deep Universal: 11 lb (5.0 kg) 



Warranty: 


Approvals: 


Measurement Canada AM-5426, Class III/III HD 

10,000d 

OIML approved 6,000/10,000, UK 2658 

CE marked 

UL & C-UL listed (Universal, Deep and Wall Mount 

Enclosure) 

Custom Wall Mount approved for 508A (Optional) 

Panel Mount UL recognized 


UNITS 

UNITS 

UNITS 

UNITS 

PRINT 

PRINT 

PRINT 

PRINT 

UNITS 

PRINT 


920i ® 


14.30" 

11.00" 

12.50" 

4.61" 

10.56" 12.50" 

0.75" 

4.61" 

10.56" 

10.87" 

8.51" 

8.51" 

18.00" 

18.84" 

10.87" 

19.63" 

10.80" 

10.80" 

0.14" 

0.14" 

5.25" 

5.25" 

6.00" 

6.00" 

920i Universal 

4X Ø.28" 

2.40" 

4X Ø.28" 

2.40" 

.50" 

.50" 

14.00" 

4.25" 4.25" 

6.75" 

10.38" 

BACK BACK VIEW VIEW 

920i Wall Mount 

11.56" 

11.56" 

920i Deep Enclosure 

9.16" 

9.16" 

5.20" 

5.20" 

7.95" 

7.95" 


920i Panel Mount 


367


920i ® 





EST. SHIP 

WEIGHT 

PRICE 

Single Channel - 115 VAC† 

67527 920i Universal 10 lb $1,900.00 

82455 920i Deep Universal 12 lb 2,100.00 

69763 920i Wall Mount, stainless steel 23 lb 2,500.00 

69764 920i Panel Mount, stainless steel bezel 9 lb 1,900.00 

Single Channel - 230 VAC† 

67615 920i Universal 10 lb 1,900.00 


69765 920i Wall Mount 23 lb 2,500.00 

69766 920i Panel Mount 9 lb 1,900.00 

Single Channel - 230 VAC with Euro plug †† 

69522 920i Universal 10 lb 1,900.00 


72133 920i Wall Mount 23 lb 2,500.00 


Single Channel - 9-36 VDC 

107713 920i Universal, 25 watt 10 lb 2,000.00 

107714 920i Deep Universal, 25 watt 12 lb 2,200.00 

107715 920i Wall Mount, 25 watt 23 lb 2,600.00 

107716 920i Panel Mount, 25 watt 9 lb 2,000.00 

Dual Channel - 115 VAC† 

69767 920i Universal 10 lb 2,000.00 


69770 920i Wall Mount 23 lb 2,600.00 


Dual Channel - 230 VAC† 

69772 920i Universal 10 lb 2,000.00 


69776 920i Wall Mount 23 lb 2,600.00 


Dual Channel - 230 VAC with Euro plug†† 

69774 920i Universal 10 lb 2,000.00 


72134 920i Wall Mount 23 lb 2,600.00 


No A-D Channel - 115 VAC† 

77790 920i Universal, without A/D channel 10 lb 1,750.00 

93243 920i Deep Universal, without A/D channel 12 lb 1,950.00 

77794 920i Wall Mount, without A/D channel 23 lb 2,350.00 

77792 920i Panel Mount, without A/D channel 9 lb 1,750.00 

No A-D Channel - 230 VAC†† 








PRICE 

Option Cards 

68532 A/D, single channel $250.00 

68533 A/D, dual channel 400.00 

67600 Memory, 1 MB NV RAM 250.00 

67601 Digital I/O, 24-channel TTL output 250.00 

67602 Analog output: selectable 0-10V, 0-20 mA 300.00 

103138 Analog output, dual channel 0-10V, 0-20 mA 500.00 

67603 Pulse input, single channel 250.00 

67604 Serial port card, dual channel, RS-232 and RS-485 300.00 

87697 Analog input +/-10 VDC, 0-20 mA and thermocouple 400.00 

Network Cards 

65383 Ethernet Thin Server (external) 295.00 

71986 Ethernet TCP/IP 10/100 Base-T module (internal) 400.00 

98057 Ethernet TCP/IP, wireless LAN card 802.11 B/G 650.00 

87803 Ethernet IP (specifically for A-B PLC) 800.00 




103136 ControlNet interface 1,000.00 

Expansion Cards 

69782 Two-slot expansion board (wall mount) 250.00 

71743 Two-slot expansion board (panel mount & deep universal) 250.00 

69783 Six-slot expansion board (wall mount) 375.00 

Hardware 

154077 Scanner, DS457-SR, RS-232, requires power source 600.00 


70056 Cable, DB9M to DB9F, Straight Cable 29.00 

93359 PS/2 Keyboard 35.00 

77788 Fiber optic board, installed in 920i 200.00 

92777 Filter, PreVent vent kit PG 7 cord grip 25.00 

19368 Start/stop controls without box, for use on wall mount 300.00 

19369 Start/stop switch with FRP box 300.00 

100759 

Sunlight viewable display, transflective installed option, 

replaces transmissive display 

265.00 

Manuals and Software 

69781 iRev Scale Software 95.00 

72809 920i interchange ® database software 295.00 

67887 Additional installation manual 25.00 

67888 Additional programming reference 55.00 


117930 CPU board assembly 850.00 

67614 Display board assembly Transmission Blue 265.00 

100759 

Display board assembly, Transflective Gray, 

sunlight viewable 

265.00 

67613 Power supply assembly, 25 watt 130.00 

71333 

Power supply, 65 watt used in Deep, Panel Mount and 

Wall Enclosures 

160.00 

97474 DC/DC converter 9-36 nominal, 25 watt 150.00 

66502 Switch panel membrane 68.00 



920i ® 


GRAYHILL RELAYS AND RACKS 


PRICE 

52332 2-channel input relay, 2.5-28 VDC $40.00 

52318 2-channel input relay, 120 VAC 40.00 


52331 2-channel input relay, 10-32 VDC 40.00 

52316 2-channel output relay, 120-140 VAC at 2 amp 40.00 


71376 2-channel output relay, 3-60 VDC at 1 amp 60.00 

71377 

2-channel output relay, 0-200 VDC/VAC at 1.5 A/10 W 

(dry contact) 

80.00 


84698 2-channel output relay, inductive load, 120-140 VAC at 2 A 60.00 


52312 

8-channel relay rack, panel mount and wall mount, requires 

50-Pin flat or round ribbon cable - 4 slots 

125.00 

52314 

16-channel relay rack, panel mount and wall mount, 

requires 50-Pin flat or round ribbon cable - 8 slots 

175.00 

52315 

24-channel relay rack, panel mount and wall mount, 

requires 50-Pin flat or round ribbon cable - 12 slots 

275.00 

76644 

8-channel relay rack, DIN rail mount, requires 50-Pin flat or 

round ribbon cable - 4 slots 

145.00 

76645 

16-channel relay rack, DIN rail mount, requires 50-Pin flat or 


225.00 

76646 

24-channel relay rack, DIN rail mount requires 50-Pin flat or 


495.00 

46189 Jumper strap, 10 position for Grayhill 4.00 

108396 Digital input 5VDC, 15-30 VAC/10-32VDC 30.00 

108397 Digital output 5VDC, 3-60VDC 30.00 

70780 Cable, 50-Pin flat ribbon for digital I/O 49.00 

70779 Cable, 50-Pin round ribbon for digital I/O with cord grip 145.00 

72442 Cable, 50-Pin round ribbon for digital I/O without cord grip 145.00 

OPTO 22 RELAYS AND RACKS 


15969 G4IDC5 10-32 VDC Input relay module, white (N/O) $30.00 

15970 G40DC5R Dry contact 100 VDC/1.5 A output, red (N/O) 30.00 

22848 G40DC5R5 Dry contact 100 VDC/1.5 A output, red (N/C) 30.00 

15971 G40AC5 115 VAC Output relay module, black (N/O) 30.00 

15972 G4IAC5 115 VAC Input relay module, yellow (N/O) 30.00 

22847 G40AC5A5 115/230 VAC Output relay module, black (N/C) 30.00 

36632 G40AC5A 115/230 VAC Output relay module, black (N/O) 30.00 

36631 G4IAC5A 230 VAC Input relay module, yellow (N/O) 30.00 

16478 Quencharc arc suppressor 11.00 

101923 FRP Enclosure with Opto 4-channel rack 225.00 

15973 4-channel relay rack, 3.25 x 3.25 in 80.00 

45408 4-channel relay rack 6.1 x 1.2 in 150.00 

99032 Adapter plate, for 4-channel Opto rack 33490 5.00 

54215 Fuse, 3.15 amp, Grayhill 3.00 

26834 Fuse, 1 amp, OPTO 22 7.50 

21735 Fuse, 4 amp, OPTO 22 7.00 



369


920i ® 

USB Programmable HMI Indicator/Controller 


Deep Universal 

Panel Mount 

Universal 

• The 920i USB shares the same hardware as 

the 920i 

• USB interface card on Port 2 

• The USB card is supported on Rev L CPU boards 

or later 

• The 920i for USB interface requires firmware 

version 5.0 or higher 

Connector Types: 

• Standard Type A: 920i connects to keyboard, 

printers* and flash drives 

• Standard Type B: 920i connects to PC 

USB Interface Functions: 

• Supports weigh mode and configuration 

mode functions 

• Supports upload of databases and .920 

configuration file 

• Supports download of databases, .920 

configuration file, iRite, COD file, and firmware file 

• Sanity checks for command errors 

Flash Drives: 

• Supports USB 2.0 

• Create sub directories by unit ID 

and database name 

• Use the root directory for generic files 

Optional Washdown Connectors (see below) 

• Sealed receptacle 

• Connectors - cables 

• USB cover - flash drive and receptacle 

* ASCII font label and ticket printers 

APPROVALS 

Wall Mount 

Measurement 

Canada 

Approved 



Power: 



Power consumption: 340 mA, maximum at 115 VAC 

(26 W) 240 mA at 230 VAC (26 W) 


10 ± VDC, 16 x 350 Ω or 32 x 700 Ω load cells 

per A/D card 


-10 mV to +45 mV 







Resolution: 





Digital I/O: 

Six I/O channels on CPU board; optional 24-channel 

I/O expansion boards available 



Serial Ports: 

Four ports on CPU board support up to 

115,200 bps; optional dual-channel serial expansion 

boards available 

Port 1: Full duplex RS-232 

Port 2: USB Type A and Type B connectors 

Port 3: Full duplex RS-232, 20 mA output 

Port 4: Full duplex RS-232, 2-wire RS-485, 

20 mA output 


4.6 x 3.4 in (116 W x 86 mm H), 320 x 240 pixel 

VGA Liquid Crystal Display (LCD) module with 

adjustable contrast. 

Transmissive display - standard 

Transflective display - option 

Keyboard: 

27-key membrane panel, tactile feel 

Unsealed Connectors 


Legal: 14°F to 104°F (-10°C to +40˚C) 

Industrial: 14°F to 122°F (-10°C to +50˚C) 

Weight: 


Wall Mount enclosure: 23.0 lb (10.4 kg) 


Deep Universal: 11 lb (5.0 kg) 



Warranty: 


Approvals: 


Measurement Canada AM-5426, Class III/III HD 

10,000d 

OIML UK 2658, 6,000/10,000 

CE marked 

UL & C-UL listed (Universal, Deep and Wall Mount 

Enclosure) 

Custom Wall Mount approved for 508A (Optional) 

Panel Mount UL recognized 

Sealed Connector 

Sealed Receptacle 

Type B 

Flash Drive Cover 

Cover 

Type A 

Washdown components (see options/accessories) 

Backplate 



920i ® 

USB Programmable HMI Indicator/Controller 



EST. SHIP 

WEIGHT 

PRICE 

Single Channel - 115 VAC † 

115003 920i Universal 10 lb $2,000.00 


115005 920i Wall Mount, stainless steel 23 lb 2,600.00 

115006 920i Panel Mount, stainless steel bezel 9 lb 2,000.00 

Single Channel - 230 VAC † 

120062 920i Universal 10 lb 2,000.00 


120066 920i Wall Mount 23 lb 2,600.00 


Single Channel - 230 VAC with Euro plug †† 

120074 920i Universal 10 lb 2,000.00 


120078 920i Wall Mount 23 lb 2,600.00 


Single Channel - 9-36 VDC 

120080 920i Universal, 25 watt 10 lb 2,100.00 

120081 920i Deep Universal, 25 watt 12 lb 2,300.00 

120082 920i Wall Mount, 25 watt 23 lb 2,700.00 

120083 920i Panel Mount, 25 watt 9 lb 2,100.00 

Dual Channel - 115 VAC † 

120086 920i Universal 10 lb 2,100.00 


120088 920i Wall Mount 23 lb 2,700.00 


Dual Channel - 230 VAC † 

120090 920i Universal 10 lb 2,100.00 


120093 920i Wall Mount 23 lb 2,700.00 


Dual Channel - 230 VAC with Euro plug †† 

120096 920i Universal 10 lb 2,100.00 


120098 920i Wall Mount 23 lb 2,700.00 


No A-D Channel - 115 VAC † 





No A-D Channel - 230 VAC with Euro plug †† 






PART # DESCRIPTION CONNECTOR TYPE PRICE 

USB Options 

Sealed Unsealed 

Note: connector is a male plug, receptacle 

is a socket 

A B A B 

79074 

Cable, unsealed connectors 

USB-A to USB-B, 6 feet 

X X $30.00 

126478 

IP68 Cable with sealed connectors, 

USB-A to USB-A, 3 meters 

X X 50.00 

124700 

IP68 Cable with sealed connectors, 

USB-A to USB-B, 3 meters 

X X 50.00 

126477 

IP68 Cable with USB-A sealed connector, 

unsealed USB-A connector 


X X 50.00 

124701 

IP68 Cable with USB-A sealed connector, 

unsealed USB-B connector, X X 50.00 

3 meters 

IP68 Cable with USB-B sealed connector, 

124702 

unsealed USB-A connector, X X 50.00 

3 meters 

126476 

Receptacle USB-A sealed to unsealed 

USB-A connector, 0.5 meter 

X X 50.00 

124703 

Receptacle USB-A sealed to unsealed 

USB-B connector, 0.5 meter 

X X 50.00 

124704 

Receptacle USB-B sealed to unsealed 

USB-B connector, 0.5 meter 

X X 50.00 

Receptacle USB-A sealed to 5 Pin 

125998* connector, 0.28 meter 

X 50.00 

(internal to 920i) 

125999* 

Receptacle USB-B sealed to 5 Pin 

Connector, 0.28 meter 

X 50.00 

(internal to 920i) 

124694 Cover for sealed receptacles 5.00 

124689 Cover for flash driver mounts on sealed receptacle 5.00 

124695 Panel Plug 1.125 in diameter 5.00 

125077 Rice Lake USB flash drive, 1 GB 15.00 

111109 USB Interface Card 150.00 

99149 Keyboard, QWERTY 109-key USB, flexible, washable 125.00 

Ethernet Options Sealed Unsealed 

Ethernet RJ-45 receptacle sealed, 

126353* 

0.28 meter internal to 920i 

(Requires Ethernet TCP/IP option 

X 75.00 

installed) 

124706 

Ethernet cable with sealed 

connectors, 3 meters 

X 65.00 

124707 

Ethernet cable sealed connector to 

unsealed connector, 3 meters 

X X 65.00 

*These options require a milled back plate which has two cutouts. If ordering only one receptacle, 

a plug (PN 124695) is required for the second cutout. USB enclosure parts with cutout: 

Part Numbers; Universal 119891, Universal Deep 115118, Wall Mount 126585 



371


NEW 

920i ® 

User Programs 


• Pre-programmed software to carry out specific weighing functions 

• Utilize Rice Lake’s iRite programming language 

• For use with all Rice Lake 920i models (hardware requirements may apply) 

• Available pre-installed with purchase of new equipment, or via iRev for installation on existing 920i 

models. 

• Fully customizable 


Dual Kiosk Truck In/Out Single Scale PN 156959: 

System consists of a bidirectional single platform truck scale, an 

inbound truck kiosk, and an outbound truck kiosk. Inbound (if 2 

outbound kiosks are used) and outbound tickets with transaction 

storage of each weighment. 

Suggested Hardware: 

(2) PN 119687 Inbound/Outbound kiosk 

PN 119689 A/D kiosk option 

Grain Program with Shrink Calculator PN 156886: 

This custom application for the 920i supports weighing trucks of 

grain. Up to 200-grain types, associated divisors and accumulator 

can be stored. Up to 500 accounts and 1000 trucks can be 

stored. 


PN 67527 920 single channel A/D 

PN 67600 1Meg memory card 

PN 23113 Epson TM-U295 ticket printer 

PN 93359 PS2 keyboard. 

Truck In/Out with Products/Customers/Trucks and 

Reports PN 77297: 

This program supports truck in/out weighing program for manual 

truck transactions using Rice Lake Weighing Systems’ 920i digital 

weight indicator. Stored IDs let you keep a database of truck IDs, 

customer, product, project information, and weigh-in weights in the 

indicator’s memory. Parameters are accessed by simply scrolling 

through the Supervisor main menu using the down arrow on the 

920i. The 920i can automatically store up to 100 truck ID’s and 

tare weights, 950 customers, 1000 products, and 1000 projects. 





PN 93359 PS2 keyboard 

Short Axle Weighing Porgram PN SZ99998: 

920i custom program will interface to a short axle scale and will 

direct each axle across the scale using traffic lights. 




PN 101923 FRP box with 4 channel relay rack, for traffic 

light control 

PN 23146 Traffic-light kit 

PN 15971 AC output relays for above (2 needed) 

PN 103181 LaserLight remote display (optional) 

Truck In/Out with Report PN SZ99999: 

920i program allows trucks to weigh in and out (saves inbound 

weight after weighing out and has value swapping) and stores 

the transaction after each weigh out with Truck ID, Gross, Tare, 

Net. Transactions may be printed or cleared at any time through 

the Setup Menu. An HID scanner is available as a peripheral 

piece of hardware. 


PN 119687 Outbound kiosk 

PN 119689 A/D kiosk option 

PN 119743 HID kiosk option 

Box Label Program for Zebra Printer PN SZ99996: 

This 920i program supports box labeling with a Zebra label 

printer (EPL). Basic features include: PLU look-up tables, box 

and pallet labeling, usage reports. 



PN 112874 LP2824 Zebra direct thermal label printer 


PN 93359 PS2 keyboard (optional) 

Box Label Program for Datamax Printer PN SZ99997: 

This 920i program supports box labeling with a Datamax 

label printer. Basic features include: PLU look up tables, box 

and pallet labeling, usage reports. 



PN 103364 M-4206 Datamax direct thermal label printer 


PN 93359 PS2 keyboard (optional) 



NEW 

920i ® User Programs 



SZ99996 Box label program for Zebra printer $595.00 

SZ99997 Box label program for Datamax printer 595.00 

SZ99998 Short axle weighing program 595.00 

SZ99999 Truck In/Out with report 395.00 

77297 Truck In/Out with products/customers/trucks and reports 495.00 

156886 Grain program with shrink calculation 395.00 

156959 Dual kiosk truck In/Out single scale 595.00 



373


920i ® 

FlexWeigh Systems 

Fillers/Batchers 


• Wallmount stainless steel enclosure 

• Application program 101, 102, 103, 104, 201, 202 

• Front panel switches E-Stop, Reset/Resume, Start 

• Softkeys for presets, CN#, ID#, formula#, totals 

• Accumulating subtotal & total registers 

• Transmitted audit trail 

• Digital I/O Board 

• Relay rack and SSR relay outputs 

Manufacturer-Approved 

DIRECT REPLACEMENT FOR FLEXWEIGH’S DWM-IV 

APPROVALS 


STANDARD SWITCHES 101/103/104 102 201 202 

E-Stop mushroom X X X X 

Reset/resume X X X X 

Start X X X X 

Discharge - X - X 

NEW 

OUTPUTS 101 102 103 104 201 202 

Fast fill** X X X X X X 

Slow fill*** X X X X X X 

Fill complete* Opt Opt X X Opt Opt 

Zero tolerance Opt Opt - - Opt Opt 

Discharge - X - - - X 

Refill - - X - - - 

Refill complete - - Opt - - - 

Slow cycle - - Opt X - - 

* Dispense for 103 and 104 

** Fast Fill Ingredient 1 201/202 

*** Fast Fill Ingredient 2 201/202 


101 Basic Filler 

Place an empty container on the scale. Automatically fill the container to a preset weight. Remove the container from 

the scale. Replace it on the scale with an empty and repeat the process. 

102 Automatic Fill, Automatic Discharge 

Place an empty container under the scale. Automatically fill the scale to a preset weight. Discharge the scale into the 

container. Remove the container from under the scale. Replace it under the scale with another empty container and 

repeat the process. 

103 Loss-In-Weight Filler 

Dispense preset net weight quantities from the scale until either low level or less-than-preset gross weight is 

achieved. Then refill to high level. 

104 Loss-In-Weight Filler 

Product supply containers are placed on the scale. Net weight quantities are dispensed from the containers until 

empty. When containers empty in the middle of a dispense cycle, the cycle is paused and allowed to resume where it 

left off when the empty containers are replaced on the scale with filled ones. 

201 Four Ingredient Dual Speed or Eight Ingredient Single Speed Batcher 

Place empty container on scale, automatically fill multiple ingredients in a sequential order to preset formula weights. 

Remove the container, replace with empty and repeat 

202 Four Ingredient Dual Speed or Eight Ingredient Single Speed With Discharge 

Fill tank or hopper with multiple ingredients in a sequential order then empty into a vessel below. 



920i ® FlexWeigh Systems Fillers/Batchers 



EST. SHIP 

WEIGHT 

PRICE 

120320 920i FlexWeigh Systems 101 23 lb $3,200.00 

120321 920i FlexWeigh Systems 102 23 lb 3,300.00 



— 920i FlexWeigh Systems 201 23 lb 3,300.00 

— 920i FlexWeigh Systems 202 23 lb 3,500.00 

Relays 

52312 8-channel relay rack (4 slots) 125.00 

52316 2-channel output relay, 120 - 140 VAC at 2A 40.00 

52317 2-channel output relay, 240-280 VAC at 2A 40.00 



120491 920i FlexWeigh Systems 101 manual $25.00 

120493 920i FlexWeigh Systems 102 manual 25.00 



— 920i FlexWeigh Systems 201/202 25.00 

OPTIONAL SWITCHES INSTALLED PRICE $150.00 

SWITCH PART # LEGEND PART # 101 102 103/104 201 202 

Selector 3 position 94296 

Manual / Off / Auto 121035 X X X X X 

Manual Ingredient Select X X 

Push-button 94276 

Fill 121036 X X X X 

Discharge 121037 X X 

Dispense 121038 X 

Refill 121039 X 

Maintained/Off/Spring Return 94299 

Fill On/-/Jog 121040 X X X X 

Fill Fast/-/Slow 121041 X X X X 

Discharge On/-/Jog 121043 X X 

Discharge Fast/-/Slow 121044 X X 

Dispense On/-/Jog 121046 X 

Dispense Fast/-/Slow 121048 X 

Refill On/-/Jog 121049 X 

Manual Feed — X X 

OPTIONAL FRONT PANEL LIGHTS INSTALLED PRICE $150.00 

LAMP LEGEND 101/102 103 104 

Ready 94289 Green 121051 X X X 

Fill Complete 94290 Red 121052 X X X 

Filling 98760 Amber 121053 X 

Filling Fast 98760 Amber 121054 X 

Filling Slow 98760 Amber 121055 X 

Discharging 94292 Blue 121056 X X X 

Discharging Fast 94292 Blue 121057 X 

Discharging Slow 94292 Blue 121058 X 

Dispensing 98760 Amber 121059 X X 

Dispensing Fast 98760 Amber 121060 X X 

Dispensing Slow 98760 Amber 121061 X X 

Dispensing Complete 94290 Red 121062 X X 

Refilling 94292 Blue 121063 X 

Refill Complete 94290 Red 121064 X 

Low Supply 94290 Red 121065 X X 

Fill Time Alarm 94290 Red 121066 X X 

Feeding (1-4) 98760 Amber — X X 



375


NEW 

920i ® FlexWeigh Systems Bulkweighers 


• Wall mount stainless steel enclosure 

• Application program 107,108,109 

• Front panel switches E-Stop, Start/Resume, End 

Cycle, Ship/Recv (only 109) 

• Softkeys for presets, ID1 and ID2 

• Accumulating weight streaming 

• Fill and discharge sequence controls 

• Fill and discharge gate monitoring 

• Printer online checking 

• Weigh and surge hopper overfill monitoring 




OPTIONS 

• Pilot lights for error indication 

• Manual override switches 



APPROVALS 


STANDARD SWITCHES 107 108 109 

E-Stop mushroom X X X 

Start/resume X X X 

End Cycle X X X 

Ship/Recv - - X 

OUTPUTS 107 108 109 

Fill Gate closed* X X X 

Discharge Gate closed* X X X 

Surge hopper not full* X X X 

Weigh hopper not full* X X X 

Printer online* X X X 

Slow cycle alarm OPT OPT OPT 

Gate alarm OPT OPT OPT 

Scale over fill alarm OPT OPT OPT 

Lower surge alarm OPT OPT OPT 

Printer alarm OPT OPT OPT 

Open fill gate X X X 

Open discharge gate X X X 

* Denotes input 


107 Shipping Bulkweigher 

The 920i FlexWeigh 107 is designed for basic shipping-mode bulkweighing applications. In shipping mode, a scale is 

loaded and discharged repetitively until the accumulated weight meets the overall target value. 

108 Receiving Bulkweigher 

The 920i FlexWeigh 108 is designed for basic receiving mode bulkweighing applications. In receiving mode, a scale is 

loaded and discharged until there is no more product to receive. To end the cycle the End Cycle button is pressed. 

109 Ship/Receive Bulkweigher 

The 920i FlexWeigh 109 allows the user to select which mode of operation to use. This is done with a three-position 

locking key switch. 



NEW 

920i ® FlexWeigh Systems Bulkweighers 



EST. SHIP 

WEIGHT 

PRICE 

Consult 920i FlexWeigh Systems 107 23 lb $4,700.00 

Consult 920i FlexWeigh Systems 108 23 lb 4,700.00 




151848 920i FlexWeigh Systems 107/108/109 manual $25.00 

OPTIONAL SWITCHES INSTALLED PRICE $150.00 

TYPE 107 108 109 

Manual / Off / Auto 3 position key selector X X X 

Man Fill 

On/-/Jog 

X 

X 

Maintained/Off/Spring Return 

Man Disch On/-/Jog X X 

OPTIONAL FRONT PANEL LIGHTS INSTALLED PRICE $150.00 

LAMP 101/102 103 104 

Slow Cycle 94290 Red X X X 

Gate Fault 94290 Red X X X 

Scale Overfill 94290 Red X X X 

Surge Backup 94290 Red X X X 

Printer 94290 Red X X X 



377


NEW 920i ® 

FlexWeigh Systems 

Flow Rate Controllers 


• Wall mount stainless steel enclosure 

• Application program 105, 106, 205 

• Front panel switches E-Stop, Reset/Resume, Start 

• Softkeys for presets, CN#, ID#, formula#, totals 

• Accumulating subtotal & total registers 




APPROVALS 




STANDARD SWITCHES 105 106 205 

E-Stop mushroom X X X 

Reset/resume X X X 

Start X X X 

Discharge - - X 

OUTPUTS 105 106 205 

Fast fill** X - X 

Slow fill*** X - X 

Fill complete* X - X 

Zero tolerance Opt - Opt 

Discharge X X X 

Refill - X - 

Refill complete - Opt -- 

Slow cycle Opt Opt Opt 

* Dispense for 105 and 106 

** Fast Fill Ingredient 1 205 

*** Fast Fill Ingredient 2 205 


105 Basic Flow-Rate Controller 

Dispense preset net weight quantities at preset flow rate values. 

106 Loss-In-Weight with Flow-Rate Control and Automatic Refill 

Dispense preset net weigh quantities at preset flow rate values with automatic refill when gross weight drops below 

threshold. 

205 Eight Ingredient Batcher with Flow-Rate Control Discharge 

Batch up to eight ingredients in sequential order to preset formula weights. Discharge to net quantities via preset 

flow- rate control. 



NEW 

920i ® FlexWeigh Systems Flow Rate Controllers 



EST. SHIP 

WEIGHT 

PRICE 

Consult 920i FlexWeigh Systems 105 23 lb $3,500.00 



Relays 

52312 8-channel relay rack (4 slots) 125.00 

52316 2-channel output relay, 120 - 140 VAC at 2A 40.00 

52317 2-channel output relay, 240-280 VAC at 2A 40.00 



Consult 920i FlexWeigh Systems 105 manual $25.00 

Consult 920i FlexWeigh Systems 106 manual 25.00 

Consult 920i FlexWeigh Systems 205 manual 25.00 



379


NEW 

® 

920i FlexWeigh Systems 

Hand Batching 


• Stainless deep universal mount enclosure 

• Application program 211 

• Soft keys for presets ID#, Formulas, Totals Accumulating Subtotal and Total Registers 

• Switch for manual confirmation 

• 20 ingredient database 

• 100 formula database 

• Audit treail data output 

• Ingredient usage totals 



211 Manual Batching System 

Prompts the user through manual weight additions based on a pre-entered formula 


PART # DESCRIPTION EST. SHIP WEIGHT PRICE 

920i Flexweigh Systems 211 13 lb $2,250.00 




NEW 

MSI-8000HD 



• Indicator or Handheld RF remote display with six-digit 1.0 in (26.4 mm) LCD screen 

• IP68 rugged milled aluminum enclosure 

• Membrane keypad for remote control functionality 

• User definable function keys for added versatility 


Enclosure: 

NEMA 4, IP68 milled anodized aluminum 

with O-ring gaskets 

Keypad: 

On/Off, Zero (100%), Tare, Print, and Two user-defined 

keys for the following functions: peak hold, high 

resolution, total, view total, net/gross, units switching 

Display: 

Six-digit 1.0 in (26.4 mm) LCD 

Units Displayed: 

Pounds, kilograms, tons, metric tons, kilonewtons 

Annunciators: 

Stable, COZ, peak, M, kg, kN. lb, ton, setpoint, function 

LEDs. Channels: 1, 2, 3, 4, TTL 

Power: 

90-247 VAC, 9-36 VDC, 18-72 VDC, 120-300 VDC 


-4°F to 140°F (-20°C to 60°C) 

RF Remote Channels: 

Up to four remote sensors, monitored individually, in 

pairs, or sum all (non-A/D version only) 

Service Counters 

A/D version only 

A/D Inputs: 

Two independent or summing load cell inputs 

Excitation: 

4.8 V current limited and over-voltage protected 

Filtering: 

Off, Low, Hi-1, Hi-2 

RF Radio Link: 

2.4 GHz 802.15.4 

RF Effective Range: 

Typically 100 or more feet (33 m) 

Data I/O: 

Dual RS-232 comm ports 

Warranty: 

One-year limited 

Approvals: 

Pending 



158427 MSI-8000HD-1 digital weight indicator, two A/D inputs, AC powered 5 lb $1,350.00 

158428 MSI-8000HD-1 digital weight indicator, two A/D inputs, battery powered 5 lb 1,450.00 

158425 MSI-8000HD-2 RF digital weight indicator, two A/D inputs, FHSS RF out, AC powered 5 lb 1,450.00 

158426 MSI-8000HD-2 digital weight indicator, two A/D inputs, FHSS RF out, battery powered 5 lb 1,550.00 



155173 MSI-8000HD tilt stand option kit $60.00 

155193 MSI-8000HD Ethernet TCP/IP option kit 350.00 

155269 MSI-8000HD serial RS-232 cable 95.00 

158779 MSI-8000HD coil relay option kit, 250 VAC/30 VDC 5A or 100 VDC 0.4A Consult 

158780 MSI-8000HD solid state relay option kit, 60 Vpk 2.7A Consult 

158781 MSI-8000HD solid state relay option kit, 200 Vpk 0.9A Consult 

149549 Universal 115/230 VAC 50/60 Hz (NA plug standard) battery charger for MSI-8000HD battery powered device 115.00 



381


CW-90 Checkweigher Indicator Only 


• Membrane, keypad consisting of ZERO, UNITS, 

PRINT, TARE, OVER, UNDER, ID, TARGET, 0-9, 

CLEAR, DECIMAL, ENTER, MENU, POWER 

• 304 stainless steel, IP66 rated 

• Prevent breather vent 

• Storage for up to 50 IDs 

• Unit of measure: kg, gm, lb, oz, lb/oz 

• High intensity LED display 



• Configurable print formats 

• Audit trail tracking 

• Optional communications: Ethernet, USB or 

Fiber Optic 

• Four configurable digital I/O 


APPROVALS 

Measurement 

Canada 

Approved 


Power - AC: 




1.5 A at 115 VAC (8 W), 

0.75 A at 230 VAC (8 W) 


+5 VDC 8 x 350 Ω or 

16 x 700 Ω load cells 


-0.5 mV/V - 4.5 mV/V 


0.3 uV/graduation minimum, 1.5 uV/ graduation 

recommended 


960,480, 240, 120, 60, 30, 15, 7.5 per second 


+/- 0.01% full scale 



Digital I/O: 

4 channels on CPU board 

Display: 

Large 0.8 in 14 segment, 6 digit high-intensity 

red LED display 


Designators for %, kg, gm, lb, oz, center of zero, G/B, 

N, T, PT, neg, motion 


Legal: 14ºF to 104ºF (-10ºC to 40ºC) 


IP66, stainless steel 

Keyboard: 

Membrane keypad, 23 keys with International 

symbols 


100,000 graduations maximum 

Warranty: 


Approvals: 

NTEP CC 08-092 


OIML R76/2006-GBI-10.02 

TC GB-1385 

TAC UK2900 


CE marked 

9.50 

3.12 


10.02 

11.24 

6.00 

3.75 

4.00 

8.57 



CW-90 Checkweigher Indicator Only 



EST. SHIP 

WEIGHT 

PRICE 

105970† CW-90, 115 VAC 7 lb $750.00 

105971†† CW-90, 230 VAC, CE marked/OIML approved 7 lb 750.00 

118888† CW-90, 230 VAC 7 lb 750.00 

† NEMA 5-15 plug †† CEE 7/7 plug 



PRICE 

77142 Ethernet TCP/IP $400.00 

108671 Wireless LAN card WiFi 802.11 A/B 550.00 

93245 USB Port (PC connection only) 125.00 

95357 USB cable, Type A to mini-B, 1 meter 5.00 


78026 Fiber optic, duplex cable 100 ft 135.00 

80892 Fiber optic cutter 9.00 

117358 WeighVault (requires part number 77142 or 108671) 195.00 



383


CW-90X Checkweigher Indicator Only 


• Piezo keypad consisting of ZERO, UNITS PRINT, 

TARE, UNDER, ID, TARGET, ENTER, MENU, POWER 

• 304 stainless steel, IP69K rated 

• Prevent breather vent 

• Storage for up to 50 IDs 

• Unit of measure: kg, gm, lb, oz, lb/oz 

• High intensity LED display 

• Battery backed time and date 


• Configurable print formats 

• Audit trail tracking and alibi storage 

• Optional communications: Ethernet, USB 

or Fiber Optic 

• Four configurable digital I/O 


APPROVALS 

Measurement 

Canada 

Approved 


Power - AC: 




1.5 A at 115 VAC (8 W), 

0.75 A at 230 VAC (8 W) 


+5 VDC 8 x 350 Ω or 

16 x 700 Ω load cells 


-0.5 mV/V - 4.5 mV/V 


0.3 uV/graduation minimum, 1.5 uV/ graduation 

recommended 


960,480, 240, 120, 60, 30, 15, 7.5 per second 


+/- 0.01% full scale 

Digital I/O: 

4 channels on CPU board 



Display: 

Large 0.8 in 14 segment, 6 digit high-intensity 

red LED display 


Designators for %, kg, gm, lb, oz, center of zero, G/B, 

N, T, PT, neg, motion 


Legal: 14ºF to 104ºF (-10ºC to 40ºC) 


IP69K, stainless steel 


100,000 graduations maximum 

Keyboard: 

Piezo keypad, 11 keys with International symbols 

Warranty: 

Three-year limited warranty 

Approvals: 



OIML R76/2006-GBI-10.02 

TC GB-1385 

TAC UK2900 


CE marked 

9.50 

3.12 


10.02 

11.24 

6.00 

3.75 

4.00 

8.57 



CW-90X Checkweigher Indicator Only 



EST. SHIP 

WEIGHT 

PRICE 

105972† CW-90X, 115 VAC 7 lb $795.00 

105973†† CW-90X, 230 VAC, CE marked/OIML approved 7 lb 795.00 

118889† CW-90X, 230 VAC 7 lb 795.00 

† NEMA 5-15 plug †† CEE 7/7 plug 



77142 Ethernet TCP/IP $400.00 

108671 Wireless LAN card WiFi 802.11 A/B 550.00 

93245 USB Port (PC connection only) 125.00 

95357 USB cable, Type A to mini-B, 1 meter 5.00 



80892 Fiber optic cutter 9.00 

117358 WeighVault (requires part number 77142 or 108671) 195.00 



385


VIRTUi ® /VIRTUi2 ® PC-Based HMI for iQUBE ® /iQUBE2 ® 

VIRTUi is a Windows ® -based desktop application that works with iQUBE 2 to 

replicate simple indicator functionality ideal for system integrators and OEMs 

wanting to provide a PC-based solution. Load cells are individually monitored 

and calibrated, making setup easy. 

STANDARD FEATURES (VIRTUI2) 

APPROVALS 

Load Cell Configuration 

• Web browser-based iQUBE ® cell status 

• Configurable display options 

• Up to four scale systems and one total scale 

• Virtual front panel consists of display and five 

button keypad 

• Up to four digital I/O (provided by iQUBE 2) 

• Primary/secondary units configuration (lb, kg, 

short tons, metric tons, none) 

• RS-232 communications at up to 460 Kbps 

• Electronic Data Processing (EDP) port over 

RS-232 and TCP/IP 

• Printer port for output-only, simplex 

communications 


Minimum System Requirements: 

Windows ® XP or greater 

Internet Explorer 6.0 SP1 

.NET Framework 1.1 

128 MB Ram 

30 MB free hard drive space 

Serial port for connection to iQUBE 

Additional serial ports are required 

for connections to printers/remote displays 

• Two print formats 

• Provides for iQUBE 2 configuration 

• Supports iQUBE 2 diagnostics with configurable 

error reporting 

• Peak weight history 

• Recalibration notification 

• Provides local and remote reporting of diagnostics 

and error conditions 

• Concentrated load capacity (CLC) 

• Section capacity 


Units (lb, kg, short tons (tn), metric tons (t), NONE) 

Gross/Net, Motion, Center of Zero 

Approvals: 

NTEP CC 04-058 Classes III and IIIL at 10,000d 



108435 VIRTUi2 Virtual Indicator DEMO CD N/C 

108436 

Activation Part Number 

Requires Machine ID and Customer’s email address 

$500.00 

Scale Configuration 




SCT-10 Signal Conditioning Transmitter/Indicator 

Din Rail Mount 

IP67 Enclosure 


• Converts digital weight to analog output 

• Sums 4 input channels in parallel 

• Theoretical calibration, real-weigh calibration, linearity calibration 

• Push button or preset tare 

• Full-scale analog output with zero setting and PLC correction of analog signal 

• Displays weight, configuration, calibration and error conditions 

• DIN rail mounting, suitable for back panel 

• Two digital inputs, two digital outputs 

• One serial port, RS-232 simplex and RS-485 connection 

• Supports ASCII or MODBUS-RTU protocols 

• CD manual 


Power: 

Input: 12 -24 VDC 

Power consumption: 5 watts 


5VDC, 120mA, 8 x 350Ω 


+/- 19.5mV 



1.0 µV/graduation recommended 


80 Hz 

Resolution: 


Weight display resolution: 999,999 

System Linearity: ± 0.01% full scale 

Digital Inputs/Outputs: 

2 inputs 5-24VDC, 2 outputs 24VDC/60mA 

N.O. or N.C. (solid state) 

Serial Port: 

RS-485 or RS-232 simplex supports up to 115,200 bps 


Optoisolated, 16 bit 

0-20mA, 4-20mA (max 300 ohm) 

0-10VDC, 0-5VDC, -10 to 10VDC, 

5 to 5VDC, (min 10k ohm) 

INPUTS 

5-24Vdc 

OUTPUTS 

ANALOG 

24Vdc RS 

OUTPUT 

60mA 485 12-24Vdc 

22232425262728293031323334 

Display: 

0.3 in (8 mm), six digit, 7 segment LED 

Annunciators: Net, center of zero, stability, KG, G, LB 

Annunciators test status of inputs/outputs 

Keyboard: 


Zero, Tare, Print, Menu, Escape, Left and 

Up Navigation, Enter 

Operating Temperature & Humidity: 

Working Temperature: -4°F to 140°F (-20°C to 60°C) 

Humidity: 85% non-condensing 

Dimensions (WxHXD): 

DIN Rail Mount: 4.84 x 3.62 x 1.96 in 

(123 x 92 x 50 mm) 

IP67 Enclosure: 6.69 x 5.51 x 3.74 in 

(170 x 140 x 95 mm) 

Weight: 

1 lb (0.5 kg) 


DIN Rail Mount: NEMA 1 

Sealed enclosure: NEMA 4X/IP67, plastic enclosure, 

clear cover, six PG 9 cord grips 

Warranty: 




129393 SCT Converter with analog output 1 lb $400.00 

129394 SCT Converter with analog output in enclosure 1 lb 550.00 

88792 12 VDC 1.2 A DIN Rail Mounted power supply 1 lb 125.00 



mA-V COM 

+ 12-24 

0 VDC 

POWER 

0 

ESC 

LOAD CELLS IN PARALLEL 

L 

- EX 

+ EX 

- SIG 

+ SIG 

SH 

- EX 

+ EX 

- SIG 

+ SIG 

SH 

- EX 

+ EX 

- SIG 


+ SIG 

SH 

- EX 

+ EX 

- SIG 

+ SIG 

SH 

IN1 

IN2 

IN COM 

OUT1 

OUT2 

+ RS485 

- RS485 

mA 

V 

NET 0 kg g 

SCT-10 

1 2 3 4 5 6 7 8 9 10111213141516171819 2021 


387


SCT-20 Signal Conditioning Transmitter/Indicator 


Shown with DeviceNet Connection 

Dimensions: 25 x 115 x 120mm 


• Space saving, vertical shape with DIN rail mounting 

• Displays weight, configuration, calibration and error conditions 

• DIN rail mounting 

• Theoretical calibration, real-weigh calibration, linearity calibration 

• Push button or preset tare 

• Converts digital weight to analog output or optional DeviceNet or Profibus or EtherNet/IP Protocol 

• Supports ASCII or MODBUS-RTU protocols 

• Full-scale analog output with zero setting and PLC correction of analog signal 

• Bit swapping selection for little endian and big endian format 

• Two digital inputs, three digital outputs 

• One serial port, RS-232 simplex and RS-485 connection 

• CD manual 


Power: 




5VDC, 120mA, 8 x 350Ω 


+/- 39mV 





300 Hz 

Resolution: 


Weight display resolution: 999,999 

System linearity: ± 0.01% full scale 

Digital Inputs/Outputs: 

2 inputs 5-24VDC, 3 outputs 115VAC/150mA 

N.O. or N.C. (dry contact) 

Serial Port: 

RS-485 or RS-232 simplex supports up to 115,200 bps 



0-20mA, 4-20mA (max 300 ohm) 

0-10VDC, 0-5VDC (min 10k ohm) 

Display: 

0.3 in (8 mm), six digit, seven segment LED 

Annunciators: Net, center of zero, stability, KG, G, LB 

Keyboard: 


Zero, Tare, Print, Menu, Escape, Left & Up 

Navigation, Enter 





SCT converter: 0.98 x 4.52 x 4.72 in 

(25 x 115 x 120 mm) 

Weight: 

1 lb (0.5 kg) 


SCT enclosure: NEMA 1 plastic pluggable connectors 

Warranty: 




129396 SCT converter with Analog output 1 lb $400.00 

129397 SCT converter with DeviceNet output 1 lb 600.00 

129558 SCT converter with Profibus DP 1 lb 600.00 

129398 SCT converter with EtherNet/IP 1 lb 750.00 

132534 SCT converter with TCP/IP 1 lb 750.00 

156903 SCT converter with Modbus/TCP 1 lb 750.00 






NEW 

SCT-30 


SCT converter with analog output 


• Powers up to eight (350Ω) load cells in parallel (with a 24-bit A/D converter) 

• A/D converter 24-bit (16000000 points) 4.8 kHz 

• 16-bit analog output: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, ±5 V, and ±10 V 

• Mounting on Omega/DIN rail for back panel or junction box 

• IP67-rated enclosed versions 

• Diagnostic message for load cell disconnect and over capacity errors 


Power: 




5VDC, 120mA, 8 x 350Ω 


+/- 39mV 





300 Hz 

Resolution: 


System linearity: ± 0.01% full scale 

Serial Port: 

RS-485 



0-20mA, 4-20mA (max 300 ohm) 

0-10VDC, 0-5VDC (min 10k ohm) 

Display: 

Eight-digit alphanumeric tow line LCD, 5 mm high 





SCT converter: 3.54 x 3.74 x 2.36 in 

(90 x 95 x 60 mm) 

IP67 enclosure: 6.69 x 5.51 x 3.74 in 

(170 x 140 x 95 mm) 

Weight: 

1 lb (0.5 kg) 


DIN rail mount: NEMA 1 

Sealed enclosure: NEMA 4/IP67, plastic enclousre, 

clear cover, six PG9 cord grips 

Warranty: 




156794 SCT converter with analog output 1 lb $325.00 

156834 SCT converter with analog output in enclosure 1 lb 475.00 

88792 12 VDC 1.2 A DIN Rail Mount power supply 1 lb 125.00 

119244 24 VDC 1.3 A DIN Rail Mount power supply 1 lb 125.00 




389


Relays and Racks 

Input/Output Components 

OPTO 22 G4 PN-45408 

OPTO 22 G4 PN-15973 

Dayton multi-function relay 

Allen-Bradley® multi-function relay with 

digital display 

Grayhill Relays and Racks 

8-channel relay rack 






Input and Output Components/Grayhill and OPTO 22 Relays and Racks 



Input/Output Component 

43942 Allen-Bradley ® multi-function relay with digital display $395.00 

29616 Dayton multi-function relay 195.00 

Other Relays 

15952 8-Pin octal relay, AC/DC output, 10A, 120 VAC coil 54.00 

15960 8-Pin octal relay, AC/DC output, 10A, 6 VDC coil 30.00 

15961 8-Pin octal socket 20.00 

Grayhill Relays and Racks 

52332 2-channel input relay, 2.5-28 VDC 40.00 






71376 2-channel output relay, 3-60 VDC t 1 amp 60.00 

71377 2-channel output relay, 0-200 VDC/VAC at 1.5 A/10 W (dry contact) 80.00 



84699 2-channel output relay, inductive load, 240-280 VAC t 2 A 60.00 

52312 8-channel relay rack, 920i panel mount, wall mount requires 50-Pin connector (4 slots) 125.00 



76644 8-channel relay rack, DIN rail mount, requires 50-Pin connector (4 slots) 145.00 



46189 Jumper strap, 10 position for Grayhill 4.00 

108396 Digital input 5VDC, 15-30 VAC/10-32VDC 30.00 

108397 Digital output 5VDC, 3-60VDC 30.00 

70780 Cable, 50-Pin flat ribbon for digital I/O 49.00 

70779 Cable, 50-Pin round ribbon for digital I/O with cord grip 145.00 

72442 Cable, 50-Pin round ribbon for digital I/O without cord grip 145.00 

155253 Board assembly, MWM IV, 8-channel, OPTO 22 GU Series compatible 125.00 

INTRINSICALLY SAFE 

OPTO 22 RELAYS AND RACKS 


15969 G4IDC5 10-32 VDC Input relay module, white (N/O) $30.00 

15970 G40DC5R Dry contact 100 VDC/1.5 A output, red (N/O) 30.00 

22848 G40DC5R5 Dry contact 100 VDC/1.5 A output, red (N/C) 30.00 

15971 G40AC5 115 VAC Output relay module, black (N/O) 30.00 

15972 G4IAC5 115 VAC Input relay module, yellow (N/O) 30.00 

22847 G40AC5A5 115/230 VAC Output relay module, black (N/C) 30.00 

36632 G40AC5A 115/230 VAC Output relay module, black (N/O) 30.00 

36631 G4IAC5A 230 VAC Input relay module, yellow (N/O) 30.00 

16478 Quencharc arc suppressor 11.00 

101923 FRP Enclosure with Opto 4-channel rack 225.00 

15973 4-channel relay rack, 3.25 x 3.25 in 80.00 

45408 4-channel relay rack 6.1 x 1.2 in 150.00 

99032 Adapter plate, for 4-channel OPTO rack 33490 5.00 

Relay Boards Fixed Dry Contact Relay 

30549 2-channel 120-240 VAC or 30 VDC/5A 150.00 

15959 4-channel 120-240 VAC or 30 VDC/5A 250.00 


391


Explosive Environment Equipment Policy 


Caution The equipment contained within this Explosive Environment section requires greater attention to 

specification and installation guidelines. Improper specification, installation or service of these products can result 

in loss of equipment or serious injury. 

Rice Lake Weighing Systems has assembled the very best in Intrinsically Safe and Explosion-Proof equipment. In 

order to properly specify, install and service this equipment, it is necessary that our distributors understand and 

appreciate the possible risks involved. 

In an effort to educate our customers on some of the precautions required, we created an Explosive 

Environment Review. Available upon request, this booklet reviews the following: 

• Explosive environment designations: Class, 

Division and Group 

• Standards and Codes applicable to 

hazardous environment equipment 

• Equipment liability 

• Theory of Intrinsically Safe, Explosion- 

Proof and Purged systems 

• Equipment specification guidelines 

• Proper installation procedures 

• Service precautions 

The Explosive Environment Product Review 

booklet also includes the resource 

information listed below: 

• NFPA 70, “National Electrical Code (NEC) 

Handbook” 

• NFPA 496, “Classification of Gases, 

Vapors, and Dusts for Electrical Equipment 

in Hazardous (Classified) Locations” 

• ANSI/UL 913, “Standard for Intrinsically 

Safe Apparatus and Associated Apparatus 

for use in Class I, II and III, Division 1 

Hazardous Locations” 

• ANSI/ISA RP 12.6, “Installation of Intrinsically 

Safe Instrument Systems for 

Hazardous (Classified) Locations” 

• FM Approval Standard 3610, “Approval Standard, Intrinsically Safe Apparatus and Associated Apparatus 

for use in Class I, II and III, Division 1 Hazardous Locations” 

• FM Approval Standard 3615, “Approval Standards, Explosion Proof Electrical Equipment” 

• “Electrical Installations in Hazardous Locations” 

Plant Safety Engineers and Certified Electricians should always be involved in the specification 

and installation of any Explosive Environment Equipment. 

Please see the next page for assistance in selecting Hazardous Area Control Equipment 

for your application 

requirements. 



Hazardous Area Classification 

For assistance in selecting Hardardous Area Control Equipment for your 

application requirements, please complete this form and submit, along 

with a description of the application, to: 

Rice Lake Weighing Systems 

Attn: Hazardous Environment 

230 West Coleman Street 

Rice Lake, WI 54868 

Telephone: 715-234-9171 • Fax: 715-234-6967 


RLWS File #:______________________________________________Date:__________________________________ 

Sales Order #:_____________________________________________Checked By:___________________________ 

Equipment PN#(s) & Serial Number(s):______________________________________________________________ 

Factory Mutual Not Applicable ____________________________ (International Orders Only)________________ 

For RLWS 

Office Use 

Only 

RLWS CUSTOMER INFORMATION: 

RLWS Customer Name: ________________________________Customer Number: ____________________________ 

Address: ____________________________________________________________________________________________ 

City: __________________________________________________ State: _____________ Zip: _______________________ 

Telephone: ( _____ )_____________________________________Fax: ( _____ )___________________________________ 

Contact Name: _______________________________________________________________________________________ 

(Printed name) (Signature) (Date) 

Authorized 

Signature: ___________________________________________________________________________________________ 


END USER INFORMATION: 

End User Company Name: _____________________________________________________________________________ 

Address: ____________________________________________________________________________________________ 

City: __________________________________________________ State: _____________ Zip:________________________ 

Telephone: ( _____ )_____________________________________Fax: ( _____ )___________________________________ 

Contact Name: _______________________________________________________________________________________ 


Authorized 

Signature: ___________________________________________________________________________________________ 


Title: ________________________________________________________________________________________________ 

(The following information is to be defined and completed by the END USER’S Plant Safety Engineer or other authorized party) 

Hazardous Area Classification: Class _________________________, Division ___________________ , Group______________ 

Specific Hazard/Material (please print): _______________________________________________________________________ 

Defining Individual: ________________________________________________________________________________________ 


Defining Authority (Title): ____________________________________________________________________________________ 

Please retain a copy of this completed form for your records. 


393


Explosive Environment Solutions 


Caution The equipment contained within this Explosive Environment section requires greater attention to 



EXPLOSION PROOF SYSTEM 

What is an explosion-proof indicator? 

It’s simply a digital weight indicator 

enclosed in a special case. The purpose 

of an explosion-proof indicator 

is not, as the name suggests, to 

protect the indicator. Instead, the 

case prevents any explosion WITHIN 

the case from causing subsequent 

fire or explosion in the surrounding 

atmosphere. 

For example, in a grain elevator application, 

combustible dusts (Class 

II hazardous atmosphere) may be 

present. A spark in a non-explosionproof 

indicator could ignite an 

elevator-wide explosion. However, 

with an explosion-proof indicator, the 

spark (or even an explosion) is contained 

within the case. The hazardous 

atmosphere cannot be ignited, 

and the elevator is protected. 

ADVANTAGES 

• Explosion containment 

• Requires low maintenance 

• No electronics 

• No moving parts 

DISADVANTAGES 

• Cannot indicate failure of 

containment capability 

• Cost of protection per cubic foot 

increases with enclosure size 

• Promotes condensation 

• Cumbersome, limited access 

• Causes harmful heat build-up 

• Limited sizes 

• Bulky designs 

• Excessive weight 

PURGE SYSTEM 

Purged systems are ideal for hazardous 

environments and use positive 

pressure to prevent particles, gases 

and fibers from entering the controller 

enclosure. As an added safeguard, 

a differential pressure switch 

automatically cuts off power when 

the pressure falls below the acceptable 

level. Type X, Y and Z purging 

hardware is available that meets 

National Fire Protection Association 

(NFPA) article 496 guidelines. 

The three configurations are as follows: 

Type X Pressurizing: Reduces the 

classification within the protected 

enclosure from Division 1 to Safe. 

Type Y Pressurizing: Reduces the 

classification within the protected enclosure 

from Division 1 to Division 2. 

Type Z Pressurizing: Reduces the 

classification within the protected 

enclosure from Division 2 to Safe. 

ADVANTAGES 

• Reduces heat build-up 

• Inhibits metal corrosion 

• Requires low maintenance 

• Increases equipment longevity 

• Allows fast access to equipment 

• Reduces moisture and dust buildup 

• Reduces classification within 

enclosure 

• Continuous system status indication 

• Protects enclosures up to 450 

cubic feet 

• Allows use of any enclosure shape 

• Cost of protection per cubic foot 

decreases with enclosure size 

DISADVANTAGES 

• Contains moving parts 

• Requires instrument air supply 

• Some systems contain electronics 

• Some systems require electrical 

power 

INTRINSICALLY SAFE SYSTEM 

Intrinsically safe load cells and safety 

barriers take the explosion proof 

principle a step further. Intrinsic 

safety ensures that the indicator’s 

electrical wiring and components 

are, by design, incapable of releasing 

enough energy to ignite flammable or 

combustible atmospheric mixtures in 

their most easily ignitable concentrations. 

In short, an intrinsically safe 

device eliminates the conditions for 

an explosion, no matter what the 

circumstances. 

ADVANTAGES 

Limits energy to device 

Requires low maintenance 

No moving parts 

Ideal for sensors 

DISADVANTAGES 

One barrier is required for 

each conductor 

Project cost increases with 

number of conductors 

Offers no protection against heat, 

moisture and dust 

Requires protection or installation 

in nonclassified area 

24 VDC, 50 mA maximum power 

and signal strength limit 



Hazardous Atmospheres (for reference only) 

Hazardous atmospheres are divided 

into three general classes and two 

divisions: 

CLASS I: Flammable Gases or 

Vapors 

CLASS II: Combustible Dusts 

CLASS III: Ignitable Fibers or Flyings 

DIVISION 1: Hazard exists under 

normal conditions. 

DIVISION 2: Hazardous material 

is handled, processed or stored. 

Hazard 

is not normally present, but may be 

released due to accident or equipment 

malfunction. 

CLASS I: 

Flammable Gases or Vapors 

CLASS I, GROUP A: (d) 

acetylene 

CLASS I, GROUP B: (d) 

acrolein (inhibited) 

arsine 

butadiene 

ethylene oxide 

hydrogen 

manufactured gases containing 

more than 30% hydrogen by volume 

propylene oxide 

propylnitrate 

CLASS I, GROUP C: (c, d) 

acetaldehyde 

allyl alcohol 

n-butyraldehyde 

carbon monoxide 

crotonaldeghyde 

cyclopropane 

diethyl ether 

diethylamine 

epichlorohydrin 

ethylene 

ethylenimine 

ethyl mercaptan 

ethyl sulfide 

morpholine 

2-nitropropane 

tetrahydrofuran 

unsymmetrical dimethyl hydrazine 

(UMDH 1, 1-dimethyl hydrazine) 

CLASS I, GROUP D: (c, d) 

acetic acid 

acetone 

acrylonitrile 

ammonia 

benzene 

butane 

1-butanol (butyl alcohol) 

2-butanol (secondary butyl alcohol) 

n-butyl acetate 

isobutyl acetate 

di-isobutylene 

ethane 

ethanol (ethyl alcohol) 

ethyl acetate 

ethyl acrylate (inhibited) 

ethylene diamine (anhydrous) 

ethylene dichloride 

ethylene glycol monomethyl ether 

gasoline 

heptanes 

hexanes 

isoprene 

isopropyl ether 

mesityl oxide 

methane (natural gas) 

methanol (methyl alcohol) 

3-methyl 1-butanol (isoamyl alcohol) 

methyl ethyl ketone 

2-methyl 1-propanol 

(isobutyl alcohol) 

2-methyl 2-propanol (teriary butyl 

alcohol) 

petroleum naptha 

pyridine 

octanes 

pentanes 

1-pentanol (amyl alcohol) 

propane 

1-propanol (propyl alcohol) 

2-propanol (isopropyl alcohol) 

propylene 

styrene 

toluene 

vinyl acetate 

vinyl chloride 

xylenes 

CLASS II: 

Combustible Dusts (c) 

CLASS II, GROUP E (c, d) 

Atmospheres containing metal dust, 

including aluminum, magnesium, 

and their commercial alloys, as well 

as other metals of similarly hazardous 

characteristics with a resistivity 

of 100 ohms per centimeter. 

CLASS II, GROUP F (c, d) 

Atmospheres containing carbon 

black, charcoal, coal or coke dusts 

that have more than 8 percent total 

volatile material, or atmospheres 

containing these dusts sensitized by 

other materials so that they present 

an explosion hazard. They will also 

have a resistivity greater than 100 

ohms per centimeter and equal to or 

less than 100 megohms per centimeter. 

CLASS II, GROUP G (c, d) 

Atmospheres containing flour, starch 

or grain as well as combustible 

plastics or chemical dusts having 

resistivity greater than 1 megohm 

per centimeter. 

CLASS III: 

Ignitable Fibers or Flyings (c, d) 

Atmospheres containing parts of 

rayon, cotton and other textiles. 

Combustible fiber manufacturing and 

processing plants such as cotton 

gins, cottonseed mills, flax processing 

plants, clothing manufacturing 

plants, sawmills and other woodworking 

locations. 

Easily ignitable fibers including rayon, 

cotton (including cotton linters and 

cotton wastes), sisal or henequen, 

istle, jute, hemp, tow, cocoa, oakum, 

baled waste kapok, Spanish moss, 

excelsior, sawdust, wood chips and 

other similar 

materials. 


(d) Rice Lake Weighing Systems’ intrinsically safe systems may be used in these atmospheres. 


395


320IS 




APPROVALS 

• Bright Light Emitting Diode (LED) 

• Stainless steel NEMA 4X/IP66 enclosure 

• T4 temperature rating 

• Front-panel digital calibration 

• Automatic zero and span temperature 

compensation 

• Excitation for four 350 Ohms or eight 700 Ohms 

load cells 

• Gross/Tare/Net computation 


• Factory Mutual (FM) Entity approved 

• Duplex fiber optic interface 

• Power ON/OFF; battery save mode 

• I/O Module Option: duplex 2 serial ports, 2 analog 

outputs, 4 digital inputs, 4 relay contact outputs. 

• Factory Mutual (FM) entity approved for Classes 

I, II, and III, Divisions I and 2, Groups A, B, C, D, E, 

F, and G 

• 300 character serial string 

FM Entity Approved for use in hazardous locations per Rice 

Lake Weighing Systems control drawing file number 72717. 

Measurement 

Canada 

Approved 

CAUTION! The equipment contained within this Explosive Environment section requires greater attention to 

specification and installation guidelines. Improper specification, installation or service of these products can result in loss of 

equipment or serious injury. 


Load Cell Excitation: 

3.0 VDC at 87.5 Ω 

4.6 VDC at 700 Ω 

Load Cell Current: 

34 mA (4 x 350 Ω load cells) or 


Load Cell Cabling: 

4 and 6-wire with remote sensing 

(recommended) 


0.6 mV/V - 4.0 mV/V 




Conversion Rate: 

60 updates/second 

Integration Time: 

20 m Sec typical 

Resolution: 

10,000 displayed graduations (NTEP), 

100,000 expanded 

The maximum number of allowed graduations will 

vary by application 

Display Increments: 

1, 2, 5 

Display: 

Six-digits, Light Emitting Diode (LED); 

16-segment, 0.8 in (20 mm) digits 

Decimal Point: 

Configurable with dead zeros 

Unit Switching: 

Configurable for two units of measurement 

with front panel operation with conversion for tare and 

setpoint values 

Front Panel Control Switches: 

Zero, Gross/Net, Tare, Print, Units Conv 

Front Panel: 

6-button flat membrane panel 

Front Panel LED Annunciators: 

Center Zero, Gross, Net, Motion, lb, kg, oz, g 

Motion Band: 

Configurable to ±1 or ±3 graduations, 1 second delay 

(or Off) 

Power Input: 

5.8 - 7.9 VDC,100 - 175 mA 

Maximum power consumption 0.25 watts 


14°F to 104°F (-10°C to 40°C) legal 


Stainless steel NEMA 4X/IP66 enclosure 

Optional Battery: 

Operating times: 4 x 350 Ω = 35-40 hrs 

1 x 350 Ω =40-50 hrs 

8 x 700 Ω = 35-40 hrs 

Charging Times: 10 hours for dead battery, 

14 hours for initial charge 

Weight: 

6.1 lb (2.8 kg) 

Warranty: 


Approvals: 

NTEP CC 03-078 Class III/IIIL 10,000d 

(TUV, C (UL), FM Entity) 


Without battery 

DIMENSIONS 

Without Battery 

A 8.56 in (217.4 mm) D 2.64 in (67.1 mm) 

B 6.00 in (152.4 mm) E 3.75 in (95.2 mm) 

C 

9.50 in (241.3 mm) 

With Optional Battery and Tilt Stand 

F 11.56 in (293.6 mm) G 4.75 in (120.7 mm) 

Optional I/O Module 

12.90 x 11.63 x 6.25 in (327.7 x 295.4 x 158.8 mm) 

Optional Power Supply 

7.00 x 5.13 x 3.125 in (177.8 x 130.0 x 79.375 mm) 

With optional battery and tilt stand 



320IS Intrinsically Safe Digital Weight Indicator 



91233 

320IS Intrinsically-Safe Digital Weight Indicator five 

button keypad with battery pack and charger & tilt stand 

$1,727.00 

91234 

320IS Instriniscally-Safe Digital Weight Indicator five 

button with A/C power supply 

1,740.00 

86241 320IS indicator only 995.00 

Hazardous Environment Cable 

32817 EL147IS hazardous environment cable 2.85/ft 

72241 Hazardous environment 3 conductor 2.25/ft 





72713 Power supply, IS-EPS-100-240 VAC $745.00 

72725 IS-6V battery option with cable adapter 535.00 

74001 Battery charger, 115 VAC 145.00 

74002 Battery charger, 115/230 VAC 535.00 

80869 

Fuse, 1.25 A, 250 V TR5 time-lag 

(replacement part for the I/O Module) 

2.50 

72726 Tilt stand (required for battery model) 57.00 

*89239 

I/O module, stainless steel NEMA 4 enclosure, safe area 

option (requires fiber optic cable, AC power required) 

995.00 

83388 

Timer relay kit includes din rail, timer relay for latching 

and mount 

370.00 


78076 I/O module manual 30.00 

* Includes relays 


*I/O module required for anything besides basic weighing 

Rice Lake Weighing Systems ® 

warrants that all Rice Lake Weighing Systems Intrinsically Safe (IS) equipment and 

systems installed by a distributor or Original Equipment Manufacturer (OEM) will operate per written 

specifications as confirmed by the Distributor/OEM and accepted by Rice Lake Weighing Systems. All systems 

and components are warranted against defects in materials and workmanship for one year. 

All Rice Lake Weighing Systems Intrinsically Safe equipment carries a Factory Mutual approval and is 

documented on various control drawings. Each device is manufactured Rice Lake Weighing Systems factory 

authorized personnel. To preserve the warranty and Factory Mutual approval, all repairs or replacement of circuit 

boards or components housed within the enclosures must be performed by Rice Lake Weighing Systems factory 

authorized personnel. 





397


320IS Plus Intrinsically Safe Digital Weight Indicator 



• Bright Light Emitting Diode (LED) 

• Stainless steel NEMA 4X/IP66 enclosure 

• T4 temperature rating 

• Front panel digital calibration 

• Automatic zero and span temperature 

compensation 

• Excitation for four 350 Ohms or eight 700 Ohms 

load cells 

• Gross/Tare/Net computation 


• Factory Mutual (FM) Entity approved 

• Duplex fiber optic interface 

• Power ON/OFF; battery save mode 

• I/O Module Option: two serial ports, two analog 

outputs, four digital inputs, four relay contact 

outputs. 

• Eight setpoint (requires I/O module) 

• Factory Mutual (FM entity approved for classes I, 

II, and III; Divisions 1 and 2; Groups A, B, C, D, E, 

F, and G 

• Time & Date (requires I/O module) 

FM Entity Approved for use in hazardous locations per Rice 

Lake Weighing Systems control drawing file number 72717. 

APPROVALS 

Measurement 

Canada 

Approved 


specification and installation guidelines. Improper specification, installation or service of these products can result in loss of 

equipment or serious injury. 


Load Cell Excitation: 

3.0 VDC at 87.5 Ω 

4.6 VDC at 700 Ω 

Load Cell Current: 

34 mA (4 x 350 Ω load cells) or (8 x 700 Ω load cells) 

Load Cell Cabling: 

4 and 6-wire with remote sensing (recommended) 


0.6 mV/V - 4.0 mV/V 


0.2 µV/graduation minimum 1.5 µV/graduation 

recommended 

Conversion Rate: 

60 updates/second 

Integration Time: 

20 mSec typical 

Resolution: 

10,000 displayed graduations (NTEP), 100,000 

expanded 

The maximum number of allowed graduations will 

vary by application 

Display Increments: 

1, 2, 5 

Display: 

Six digits, Light Emitting Diode (LED); 16-segment, 

0.8 in (20 mm) digits 

Decimal Point: 

Configurable with dead zeros 

Unit Switching: 

Configurable for two units of measurement with front 

panel operation with conversion for tare and setpoint 

values 

Front Panel Control Switches: 

Zero, Gross/Net, Tare, Print, Units Conv, Start, Stop, 

Accum, Tare Display 

Front Panel: 

24-button flat membrane panel 

Front Panel LED Annunciators: 

Center Zero, Gross, Net, Motion, lb, kg, oz, g 

Motion Band: 

Configurable to ±1 or ±3 graduations, 1 second delay 

(or Off) 

Power Input: 

5.8 - 7.9 VDC,100 - 175 mA 

Maximum power consumption 0.25 watts 


14°F to 104°F (-10°C to 40°C) legal 


Stainless steel NEMA 4X/IP66 enclosure 

Optional Battery: 

Operating Times: 4 x 350 Ω = 35-40 hrs. 

1 x 350 Ω = 40-50 hrs. 

Charging Times: 10 hours for dead battery, 

14 hours for initial charge 

Weight: 

6.1 lb (2.8 kg) 

Warranty: 


Approvals: 

NTEP pending (TUV, C (UL), FM Entity 03-078) 

Class III/IIIL 10,000d 


Without battery 

With optional battery and tilt stand 

DIMENSIONS 

Without Battery 

A 8.56 in (217.4 mm) D 2.64 in (67.1 mm) 

B 6.00 in (152.4 mm) E 3.75 in (95.2 mm) 

C 

9.50 in (241.3 mm) 

With Optional Battery and Tilt Stand 

F 11.56 in (293.6 mm) G 4.75 in (120.7 mm) 

Optional I/O Module 

12.90 x 11.63 x 6.25 in (327.7 x 295.4 x 158.8 mm) 

Optional Power Supply 

7.00 x 5.13 x 3.125 in (177.8 x 130.0 x 79.375 mm) 



320IS Plus Intrinsically Safe Digital Weight Indicator 



91235 

320IS Plus Intrinsically-Safe Digital Weight Indicator full 

keypad with battery pack and charger & tilt stand 

$1,927.00 

91236 

320IS Plus Intriniscally-Safe Digital Weight Indicator full 

keypad with A/C power supply 

1,940.00 

86240 320IS Plus indicator only 1,195.00 

Hazardous Environment Cable and Fiber Optic Cable 

32817 EL147IS hazardous environment cable 2.85/ft 

72241 Hazardous environment 3 conductor 2.25/ft 





72713 Power supply, IS-EPS-100-240 VAC $745.00 

72725 IS-6V battery option with cable adapter 535.00 

74001 Battery charger, 115 VAC 145.00 

74002 Battery charger, 115/230 VAC 535.00 

80869 

Fuse, 1.25 A, 250 V TR5 time-lag 

(replacement part for the I/O Module) 

2.50 

72726 Tilt stand (required for battery model) 57.00 

89239 

I/O Module, stainless steel NEMA 4 enclosure, safe area 

option (requires fiber optic cable, AC power required) 

995.00 

83388 

Timer relay kit includes din rail, timer relay for latching and 

mount 

370.00 


78076 I/O Module manual 30.00 


Rice Lake Weighing Systems ® 

warrants that all Rice Lake Weighing Systems Intrinsically Safe (IS) equipment 

and systems installed by a distributor or Original Equipment Manufacturer (OEM) will operate per written specifications 

as confirmed by the Distributor/OEM and accepted by Rice Lake Weighing Systems. All systems and 

components are warranted against defects in materials and workmanship for one year. 

All Rice Lake Weighing Systems Intrinsically Safe equipment carries a Factory Mutual approval and is documented 

on various control drawings. Each device is manufactured Rice Lake Weighing Systems factory authorized 

personnel. To preserve the warranty and Factory Mutual approval, all repairs or replacement of circuit boards or 

components housed within the enclosures must be performed by Rice Lake Weighing Systems factory 

authorized personnel. 





399


EL232 XPCD Explosion Proof Remote Serial Display 


NOTE: The IQ plus ® 310, UMC555 XPCD, and IQ ® plus 810 

XPCD have been discontinued. The same functionality, plus 

an increased feature set of 520 and 920i, are available as 

special order XPCD enclosures. All explosion-proof devices 

are now built-to-order, so please coordinate purchase of 

these items with one of our application specialists. 


• 20 mA current loop or RS-232 input 

• Compatible with all IQ plus ® series indicators 


Display: 

High-intensity, red LED, 0.8 in (20.3 mm) high digits 

Input Voltage: 

115 VAC, 60 Hz 

Weight: 


NEC Classifications: 

Class I, Division 1, Groups C & D; Class II, Division 1, 

Groups E, F & G and Class III hazardous environments 

• NEMA 4, 7CD, 9EFG enclosure 

Baud Rate: 

1200, 2400, 4800 and 9600 

Interfaces: 

20 mA CL and RS-232 standard. The EL232 XPCD 

can communicate, as shipped, with 12 of the most 

common scale indicator families currently available. 

Please consult factory for model numbers and 

interface requirements. 

Warranty: 




20904 EL232 XPCD Explosion Proof Remote Serial Display 25 lb $2,995.00 

DIMENSIONS 

A 10.50 in (266.7 mm) D 11.75 in (298.5 mm) 

B 9.50 in (241.3 mm) E 10.50 in (266.7 mm) 

C 5.81 in (147.7 mm) F 7.50 in (190.5 mm) 

G 

(Glass Diameter) 11.75 in (298.5 mm) 






Intrinsic Safety Barriers 


• Each system features excitation, sense and signal 

barriers 

• Available in an enclosure for external mounting or 

in a chassis mount version 

• R Stahl ® or equivalent barriers that are approved 

by Factory Mutual 

• 9002 Dual Channel 



Part #31201: 

+ Excitation 9001/01-158-390-101 

Voltage Range: 

+12 VDC 

Internal Resistance: 

55 Ω 

Open Circuit Voltage: 

15.7 VDC 

Short Circuit Current: 

390 mA 

Classifications: 

FM approved, UL listed, 

CSA certified, SA, CE marked 

Part #31202: 

± Excitation 9002/10-187-270-001 


±6 VDC 


46 Ω 


18.7 VDC 


278.8 mA 



CSA- certified, SA, CE marked 

Part #31540: 

+ Excitation 9001/01-083-442-10 


+6 VDC 


48 Ω 


8.4 VDC 


442 mA 




Part #30263: 

± Signal 9002/77-093-040-001 


±6 VDC 


482 Ω 


9.6 VDC 


40.9 mA 



CSA-certified, SA, CE marked 

Part #31542: 

RS-232 9002/22-093-300-001 


±6 VDC 


75.8 Ω 


9.6 VDC 


297.5 mA 




Part #30264: 

± Sense 9002/10-187-020-001 


±6 VDC 


482 Ω 


18.7 VDC 


22 mA 




Part #69491: 

- Excitation 9001/02-016-150-111 


±0.7 VDC 


12.8 Ω 


1.64 VDC 


127.4 mA 




Part #69492: 

+ Sense 9001/01-168-020-101 


±12 VDC 


898 Ω 


16.8 VDC 


18.7 mA 




Part #69493: 

- Sense 9001/02-016-015-101 


+0.7 VDC 


127 Ω 


1.64 VDC 


13.7 mA 




Part #70723: 

- Excitation 9001/00-083-442-101 


-6 VDC 


26 Ω 


-8.4 VDC 


442 mA 




Part #70724: 

+ Sense 9001/01-086-020-101 


+6 VDC 


470 Ω 


8.6 VDC 


18.3 mA 




Part #72396: 

- Sense 9001/00-086-020-101 


+6 VDC 


480 Ω 


8.6 VDC 


18.3 mA 



CSA-certified, SA, CE marked 

Part #30266: 

- Excitation 9001/00-086-390-101 


-0.6 VDC 


30 Ω 


8.6 VDC 


377.6 mA 


FM approved 

Part #72521: 

- Excitation 9001/01-199-390-101 


+16 VDC 


67 Ω 


-19.9 VDC 


382.7 mA 


FM approved, CSA-certified, 

CE marked 

Part #30265: 

+ Excitation 9001/01-086-390-101 


+6 VDC 


30 Ω 


8.6 VDC 


377.6 mA 


FM approved 


401


Intrinsic Safety Barriers 




Barrier Kit #1 

General purpose (UL applications - STAHL control drawing 9000-6UL). RL20000B, RL20001-T10, RL30000, RL35023-N5, RL90000, RL35023S, RL1521, RL35023, 

RL70000C, RL75016, RL75040, RL75058B, RL75223B, RL75016SS load cells. 

For use with indicators that have ±5 Volt power supplies 

31202 9002/10-187-270-001, ± Excitation barrier 1 lb $450.00 

30264 9002/10-187-020-001, ± Sense barrier 1 lb 475.00 

30263 9002/77-093-040-001, ± Signal barrier 1 lb 475.00 

Barrier Kit #2: 

RL1010, RL1040, RL1140, RL1250 and RLETO load cells. 

For use with indicators that have ±5 Volt power supplies 

31540 9001/01-083-442-101, + Excitation barrier 1 lb 295.00 

70723 9001/00-083-442-101, - Excitation barrier 1 lb 295.00 

70724 9001/01-086-020-101, + Sense barrier 1 lb 295.00 

72396 9001/00-086-020-101, - Sense barrier 1 lb 325.00 



RL20000B, RL20001-T10, RL30000, RL35023-N5, RL90000, RL35023S, RL1521, RL35023, RL70000C, RL75016, RL75040, RL75058B, RL75223B, RL90000, 

RL75016SS, RL1010, RL1040, RL1140, RL1250 and RLETO load cells. 

For use with indicators that have 10 Volt power supplies 







RL20000A, RL20001HE, RL30000A, RL30001A, RL30002A, RL39123, RL35082, RL35083, RL50210, RL35023S, RLETB, RLETS, RLSSB, RLHSS, RLSB250, RL70000B, 

RL70000SS, RL75223, RL8C2P1, RL39523, RLHTC,RL20000SS, RL8C2P1, RL30000B load cells. 

For use with indicators that have 10 Volt power supplies 






31542 9002/77-093-300-001, RS-232 1 lb 425.00 

30266 9001/00-086-390-101, - Excitation barrier 325.00 

30265 9001/01-086-390-101, + Excitation barrier 325.00 

72521 9001-01-199-390-101, + Excitation barrier 425.00 

OPTIONS & ACCESSORIES: 


33531 DIN rail, 6 in length $6.00 

35815 IS barrier installation manual 5.00 

110424 FRP enclosure, up to 4 barriers (not included) 225.00 



Profibus ® 

DP Interface 

PN 68540 


• DP intelligent slave 

• Standard GSD file on disk 

• 128 selectable addresses 


720i , 820i ® 

and 920i ® Power Requirements: 

Bus adapter card with DeviceNet Module, DC power 

Supply voltage 6 VDC, supplied by 920i bus 

Typical current draw: 370 mA 

Power consumption: 2.22 W 

• Auto baud rate up to 56K 

• Registered with Profibus Trade Organization 


14°F to 104°F (-10°C to 40°C) 

Warranty: 




EST. SHIP 

WEIGHT 

PRICE 

68540 Profibus DP interface kit (internal), for use with 720i/820i/920i 3 lb $650.00 

NOTE: Because Profibus DP option boards interface with programs written by non-RLWS parties, please consult factory for 

latest technical updates before quoting. 



PRICE 

73754 Additional GSD file $25.00 

69948 Additional operating manual, (720i/820i/920i) 40.00 

PROTOCOL CARDS 


403


NEW 

Profibus DP Interface 

PN 156556 


• DP intelligent slave 

• Standard GSD file on disk 


Dimensions: 

2.0 x 1.9 x 0.75 in 

(51.8 x 48 x 19.1 mm) 

Power Requirements: 

3.15-3.45 VDC 


• 100 selectable addresses 

• Up to 12 mbps baud rate 


-40°F to 176°F (-40°C to 85°C) 

Warranty: 



EST. SHIP 

WEIGHT 

PRICE 

156556 Profibus DP interface kit, for use with 880 indicator 3 lb $550.00 




PRICE 

157941 Additional GSD file $25.00 

156784 Additional operating manual, (880) 40.00 



NEW ProfiNet® Interface 

PN 156555 


• ProfiNet communication adapter 

• Onboard diagnostic LEDs 

• 100 mbps Baud Rate 


Dimensions: 

2 x 1.9 x 0.75 in 

(51.8 x 48 x 19.1 mm) 


3.15-3.45 VDC 


-40°F to 176°F (-40°C to 85°C) 

• Works as an I/O device on the ProfiNet network 

• PROFIenergy compliant 

IP Address Range: 

Full IP address range DHCP 

Configuration: 

GSDML file 

Connector Type: 

RJ-45 (two with dual port version) 



EST. SHIP 

WEIGHT 

PRICE 

156555 ProfiNet Interface kit for 880 (single port) 1 lb $550.00 

156916 ProfiNet Interface kit for 880 (dual port) 1 lb 650.00 



PRICE 

157940 Additional Profinet CD $25.00 

156781 Additional operating manual, (880) 40.00 



405


Allen-Bradley ® 

Remote I/O 

Limited Supply 


PN 68539 


• 115 or 230 VAC operation 

• Discrete data transfer 


720i, 820i and 920i Electrical: 

DC power 

Supply voltage: 6 VDC supplied by 720i, 820i and 

920i bus 


Power consumption: 126 mA 

Communications: 

Twin axial cable attachment to network at 57.6, 115.2 

or 230.4 Kbps 

Update rate is dependent on the configured baud rate 

and the number of network modes 

• Block data transfer 


14°F to 104°F (-10°C to 40°C) 

Warranty: 


PART NUMBER/PRICE (LIMITED SUPPLY) 


EST. SHIP 

WEIGHT 

PRICE 

68539 Allen-Bradley Remote I/O (internal), for use with 720i/820i/920i 3 lb $650.00 



36254 Additional operating manual, external version $35.00 

69950 Additional operating manual, (720i/820i/920i) 35.00 

NOTE: Because A-B Remote I/O option boards interface with programs written by non-RLWS parties, please consult factory for 

latest technical updates before quoting. 



DeviceNet 

Interface 


• DeviceNet communication adapter 

• Compact size for internal installation in 720i, 

820i, and 920i ® indicators 

• Polled I/O connection 

• 125 Kbps, 250 Kbps, and 500 Kbps baud rate 

• On-board LED diagnostics 

• Floating-point commands support decimal points 


PN 68541 


Bus adapter card with DeviceNet Module, DC power 

Supply voltage 6 VDC, supplied by 720i, 820i and 

920i bus 


Power consumption: 1.62 W 

The bus shall be supplied with 24 V DC 

±10% on the fieldbus connector 

Field Bus Interface: 

Pluggable screw connector 


14°F to 104°F (-10°C to 40°C) 

Diagnostic Led: 

Network status, module status 

Communications: 

Twisted-pair cabling at 125, 250, or 500 Kbps 

Update rate is dependent on the configured baud rate 

and the number of network modes 

Galvanic Isolation: 

Bus power is separated from other electronics via 

DC/DC converter. The send and receive signals are 

isolated via opto couplers 

Warranty: 




68541 DeviceNet interface for use with 720i/820i/920i 3 lb $650.00 



PRICE 

72779 Additional EDS CD $25.00 




407


NEW DeviceNet Interface 


• DeviceNet communication adapter 

• DIN Rail Mount for installation with 880 

• 125 Kbps, 150 Kbps and 500 Kbps baud rate 

• Onboard LEDs 


PN 156558 

Dimensions: 

2 x 1.9 x 0.75 in 

(151.8 x 48 x 19.1 mm) 


3.15-3.45 VDC 


-40°F to 176°F (-40°C to 85°C) 

IP Address Range: 

MAC ID 0-63 






156558 DeviceNet interface for use with 880 1 lb $550.00 



PRICE 

157945 Additional EDS CD $25.00 

156783 Additional operating manual (820i/920i) 40.00 



ControlNet 

Interface 


• Option for 820i and 920i 

• Polled I/O connection 

• On-board LED diagnostics 

• Floating-point commands support decimal points 



Supply voltage 6 VDC, supplied by 820i, and 920i bus 


BNC connector 

Operating Temperature 

14ºF - 104ºF (-10ºC - 40ºC) 

Diagnostic Leds: 

Tx/Rx data, good link, status, diagnostics 


5 V regulated, 350 mA 


Link status, module status, network 

status, activity 


RJ-45 

PN 103136 



103136 ControlNet interface for use with 820i/920i $1,000.00 

Cables 

Consult factory for coaxial cable with cord grips 



PRICE 

104828 Additional ControlNetCD $25.00 

103122 Additional operating manual (820i/920i) 40.00 



409


NEW MODBUS-TCP® Interface 


• Active module with serial and parallel application 

interface 

• Complete Modbus-TCP server 

• Up to Eight Bytes of I/O data in each direction 

• Transformer isloated interface 100 Mbps full 

duplex Ethernet 

• Onboard diagnostic LEDs 

• CE and UL Compliant 

PN 156557 


Dimensions: 

2.0 x 1.9 x 0.75 in 

(151.8 x 48 x 19.1 mm) 


3.15-3.45 VDC 


-40°F to 176°F (-40°C to 85°C) 

Relative Humidity: 

5-95% non condension 






156557 Modbus-TCP Interface kit for 880 (single port) 1 lb $550.00 

156917 Modbus-TCP Interface kit for 880 (dual port) 1 lb 650.00 



PRICE 

157399 Additional Modbus-TCP CD $25.00 

156782 Additional operating manual (880) 40.00 



EtherNet/IP ® 

Protocol Card for AB PLC 


• Industrial Protocol for AB PLC 

• IP address settings configurable with on-board 

DIP switched, Web page, or ARP or DHCP 

• Supports Rockwell Automation ® EtherNet/IP level 

• CE marked and UL conformance 

• Onboard diagnostic LED 

Control Protocols 

• Supports the Modbus/TCP protocol and conforms 

to Modbus/TCP specification 1.0 


PN 87803 

Physical Specifications: 

Length: 2.13 in (86 mm) 

Width: 3.38 in (54 mm) 

Height: 0.59 in (15 mm) 


+5 VDC ± 5%, powered by indicator 


350 mA on the 5 V power connection 


14°F to 158°F (-10°C to 70°C) 

Non-Operating Temperature: 

-13°F to 185°F (-25°C to 85°C) 


5 - 95% non-condensing 


Link status, module status, network 

status, activity 


RJ- 45 



87803 EtherNet/IP Protocol Card for 720i/820i/920i $800.00 



PRICE 

72763 Additional EtherNet/IP CD $25.00 




411


NEW EtherNet/IP® for AB PLC 


• Industrial Protocol for AB PLC 

• IP address settings configurable with web page, 

ARP or DHCP 

• Supports Rockwell Automation EtherNet/IP 

• Diagnostic LEDs 

• CE marked and UL conformance 

PN 156554 


Dimensions: 

2 x 1.9 x 0.75 in 

(151.8 x 48 x 19.1 mm) 


3.15-3.45 VDC 


-40°F to 176°F (-40°C to 85°C) 


5-95% non condensation 

Address Range: 

Full IP address range 




156554 EtherNet/IP Interface kit for 880 (single port) 1 lb $550.00 

156915 EtherNet/IP Interface kit for 880 (dual port) 1 lb 650.00 



PRICE 

157943 Additional EtherNet/IP CD $25.00 

156861 Additional operating manual (880) 40.00 



Ethernet TCP/IP Interface 


• Supports any serial devices with seven or eight 

data requiring Ethernet access 

• Compact size for internal installation in 720i TM , 

820i ® and 920i ® indicators 

• Can be used in other applications requiring fivevolt 

power supplied 

• 10/100 megabyte through RJ-45 connector or 

wireless option 

• HTTP, serial, telnet, and SNMP management 

PN 71986 


Supported Protocols: 

ARP, UDP, TCP, Telnet, SNMP, ICMP, HTTP, BOOTP, DHCP, 

and TFTP 

Compatibility: 

Ethernet: Version 2.0/IEEE 802.3 

Network Interface: 

Ethernet: RJ-45 (10/100 Base-T) or AUI 

(transformer and resistors/capacitors required) 

Serial Interface: 

2 TTL serial interfaces 

Reset line: 

RxD/TxD 

RTS/CTS/DCD 

DTR line (for disconnect) 

Three status lines (for LEDs) 

Data Rates: 

300 bps to 115.2 Kbps 

Serial Line Formats: 

Characters: seven or eight data bits 

Stop bits: one or two 

Parity: odd, even, none 

Modem Controls: 

DTR (TTL level) 


Flow Control: 

XON/XOFF 

CTS/RTS 

None 

Management: 

Internal Web server 

SNMP (read only) 

Serial login, Telnet login 

Diagnostic LEDs: 

TX/RX Data 

Good Link 

Status 

Diagnostics 


5 V regulated 

250 mA (Ethernet model) 


41°F to 122°F (5°C to 50°C) 


EST. SHIP 

WEIGHT 

PRICE 

71986 Ethernet TCP/IP Interface for use with 720i/820i/920i 3 lb $400.00 

98057 Wireless Ethernet TCP/IP interface for use with 720i, 820i and 920i 3 lb 650.00 




72763 Ethernet CD $25.00 


Cables 

72697 RJ-45 to RJ-45, straight 35.00 

78860 RJ-45 to RJ-45, cross over 35.00 


413


ConnexLink 

Wireless Radio 900 MHZ Transceivers 

Wireless Network 


• Durable industrial-grade enclosure with 

mounting flanges 

• Transmits around corners and through walls 


Frequency Band: 

902-928 MHz 

Modulation: 

FHSS FSK 

Standard Interface: 

RS232 (DB9 Male) or 

ConnexLink PRO (only) :RS485 (6-Pin terminal block) 

Serial Interface Data Rate: 

up to 115200 kbps 

Output Power: 

5 mW-1000 mW variable 

Input Power: 

7 Vdc-18 Vdc 

Current Draw (at 12 VDC): 

400 mA TXD, 40 mA RXD 

Power Supply: 

AC transformer via 6 ft cable (183 cm) 

Electrical Requirements: 

Line voltage 100-120 V; frequency 50-60 Hz 

(240 V outside the US) 

• Reliable communications up to 115200 kbps 

• Supports point-to-point and point-to-multipoint 

applications 

Channels: 

Up to 32 

Security: 

1-byte system ID, DES 

Sensitivity: 

-99dB at full RF data rate 

Range (line-of-sight): 

Up to 20 miles (32 km) 

Temperature: 

-40°F to 176°F (-40ºC to 80°C) 

Humidity (non-condensing): 

10% to 90% 

Weight: 


XTend-PKGTM RF Modems 


• Indoor/urban range up to 3000 feet 

• Outdoor line-of-sight range up to 40 miles 

(with high gain antenna) 

• Outdoor line-of-sight range up to 14 miles 

(with 2.1 dB dipole antenna) 

• Outstanding receiver sensitivity (-110 dBm at 

9600 bps) 

• Adjustable power output from 1mW to 1 W; up to 

4 W EIRP (with 6 dB antenna) 

• Interface data rate: 10 - 230,400 bps 

(including non-standard baud rates) 


Connection Options: 

RS-232/422/485, DB-9 (XTend PKG-R) 

USB (XTend PKG-U) 

RS-232/422/482, DB-9/screw terminal 

(XTend PKG-NEMA) 

Dimensions: 

XTend PKG-R/PKG-U: 

Length: 2.75 in (6.99 cm) 

Width: 5.50 in (13.97 cm) 

Depth: 1.13 in (2.86 cm) 

Weight: 7.10 oz (200 g) 

XTend NEMA: 

Length: 5.13 in (13.02 cm) 

Width: 7.13 in (18.10 cm) 

Depth: 1.50 in (3.81 cm) 

Weight: 12.30 oz (348.70 g) 

Environmental: 

XTend PKG-R/NEMA 

-40oC to 85oC (industrial) 

XTend PKG-U 

0oC to 70oC (commercial) 


XTend PKG-R 

Receive current: 110mA 

Power supply voltage: 7-28V 

Pin sleep power-down: 17mA 

Serial port sleep down: 45 mA 

Idle current: 19-39 mA 

Transmit current: 110 - 900 mA 

XTend PKG-U 

Receive current: 110mA (self power) 




Idle current: 21-35 mA (self power) 

Transmit current: 88-480 mA 

XTend NEMA 

Receive current: 100mA 




Idle current: 19-39 mA (self power) 

Transmit current: 110-900 mA 

• Throughput data rate (software selectable) 

9,600 or 115,200 bps 

• FR data rate:10,000 bps at 9,600 throughput 

data rate 125,000 bps at 115,200 bps 

• Low power consumption for power-sensitive 

applications(Pin, serial port and cyclic sleep 

modes available) 

• Streaming, acknowledged and multi-transmit 

modes supported 

• Easy out of the box operation 

(no configuration necessary) 

• Durable industrial grade enclosure 

Antenna: 

XTend PKG-R/PKG-U 

Connector: RPSMA (Reverse Polarity SMA) 

Impedance: 50 ohms unbalanced 

XTend NEMA - weatherproof 

External antenna version: 

Connector: RPTNC 


Internal antenna version: 

Connector: MMCX 


Certifications: 

XTend PKG-R/PKG-U 

FCC part 15.247: OUR-9XTEND 

Industry Canada (IC): 4214A-9XTEND 

XTend NEMA 

FCC part 15.247: OUR-9XTEND 

Industry Canada (IC): 4214A-9XTEND 

IP66/67, IP66 

IK 08 

NEMA 1, 4, 4X, 6 (12 and 13) 

UL 94-5V, UL 508 

Networking and Security: 

Frequency: ISM 902 MHz 

Spread spectrum: FHSS 

(Frequency Hopping Spread Spectrum) 

Modulation: FSK (Frequency Shift Keying) 

Supported Network Topologies: 

Peer to peer (no master/slave dependencies) 

point-to-point, point-to-mulitpoint and multidrop 

Channel capacity: 10 hop sequences share 50 

frequencies 

Encryption: 256-bit AES Encryption 

AES algorithm meets Federal Information Processing 

Standard-197 (FIPS-197) 

RF TRANSCEIVERS 



112979 XTend-PKG RF Modem $895.00 

Package includes one radio, antenna, & power supply 


415


EL148 HE Replacement Mettler Toledo Power Cell Cable 

EL148 HE Replacement Mettler 

Toledo Power Cell Cable 


• 100% stainless steel military connector-electro 

deposited nickel plating with stainless banding 

and epoxy heat shrink strain relief 

• Stainless steel artic ring precision cut for 

improved connection 

• Textured rubber boot for additional grip 

• Standard Mettler Toledo ® color code 

• Custom lengths available including standard 

lengths listed below cables 


PART # CABLE LENGTH EA. FEET PRICE 

100268 8 ft $325.00 

101102 12 ft 335.00 

104164 15 ft 338.00 

100269 26 ft 375.00 

100270 35 ft 385.00 

RF TRANSCEIVERS 



Accessories QWERTY Style Keyboards and Aluminum Keypads 

FOR USE WITH: 

• Any system using RS-232 communications 

• Kiosk systems 

• 920i with custom software 

• 720i, 820i control systems 

Visible Lights and Audible Alarms 

Din Rail Transient Protector & Fuse 

Surge Suppressor 

Terminal Block 

EL226 Transient Protection Board 

• Protects sensitive microprocessorbased 

equipment against spikes and 

short-duration surges while providing 

RFI/EMI protection 

• Consult factory for standard features 

Manual Pushbuttons/Pushbutton Switches 

• Key switches 

• Lighted pushbuttons 

• Pilot lights 

• 2- and 3-position switches 

• Colored pushbuttons 

• Emergency stop mushroom switches 

• Custom legend plates 

ACCESSORIES 


417


Accessories QWERTY Style Keyboards and Aluminum Keypads 



99149 Waterproof 80-key flexible keyboard USB $125.00 

36914 Vandal-proof cast aluminum keypad* 145.00 

38472 Keypad encoder 395.00 

Visible Lights and Audible Alarms 

22838 Buzzer, 80 dB, steady 130.00 

22839 Buzzer, 80 dB, pulse 130.00 

156106 Buzzer box, 115 VAC, FRP enclosure 545.00 

43931 Strobe lights, red 145.00 

43930 Strobe lights, amber 145.00 

43929 Strobe lights, blue 145.00 

Din Rail Transient Protector and Fuse 

62965 Terminal Block 25.00 

53895 Surge Suppressor 195.00 

Manual Pushbuttons/Pushbutton Switches 

N/A 

Operator and contact block combinations 

starting at 

12.00 

ACCESSORIES 



X-Purge/Z-Purge 

X-Purge 


• Vents 

• Explosion-proof audible alarm 

• Explosion-proof strobe light 

• Fittings 

• Tubing 

• Operational bypass switch 

• Rapid Exchange ® purging technology 

Many custom panels can utilize purge technology to bring 

high-level control to hazardous areas. Call a Rice Lake Sales 

Engineer for more information. 

INDUSTRIAL CONTROL PRODUCTS 

Z-Purge 


• Vents 

• Explosion-proof audible alarm 

• Explosion-proof strobe light 

• Fittings 

• Tubing 

Many custom panels can utilize purge technology to bring 

high-level control to hazardous areas. Call a Rice Lake Sales 

Engineer for more information. 

Explosion-proof audible alarm Explosion-proof strobe light Vent 


419


Tripp-Lite USB to Serial Converters Serial Adapters 



• Portable design—no AC power required 

• Simple plug-and-play setup 


Data Transfer Rate: 

More than 500 kbps 

LED: 

Data transfer/handshaking (orange) 

• Supports data transfer rates of more than 

500 kbps 

• Hot swappable 


450 mW 

USB Specification: 

V1.1 compliant 



153603 USB to Serial Converter 1 lb $80.00 

DB9 (Male) Connector 

Type A USB Connector 

DB-9 PIN ASSIGNMENTS: 

PIN 

Assignment 

1 CD 

2 RXD 

3 TXD 

4 DTR 

5 GND 

6 DSR 

7 RTS 

8 CTS 

9 RI 



437 Bridgesensor Signal Conditioner 


• Complete strain gage bridge signal conditioner 

• 4-20 mA or 0-20 mA output 

• Output capable of driving 1000 Ohms loop 

• Bridge balance with 68% tare offset capability 

• High gain amplifier; can accept live load signals 

as low as 3 mV and provide 16 mA output span 


Output Current Span: 

4 to 20 mA; 0 to 20 mA 

Input for 16 mA Span: 

3 mV to 62 mV 

Zero Adjust: 

12 mA 

Amplifier: 

Cell sensitivity (10 volts excitation): 

0.3 mV/V to 6.2 mV/V 

Output: 

Current: 0 to 20 mA 

Bridge Excitation Supply: 

Adjustment range: 5 to 15 Volts 


• Sufficient excitation current for five load cells 

• Powered by 10 to 36 VDC unregulated 

• Rugged epoxy encapsulated design 


Input Voltage: 10 to 36 Volts DC 

Input current with 150 mA B+ load: 0.17 A at 36 V to 

0.7 A at 10 V 

Input current with one 350 Ω bridge: 0.1 A at 36 V to 

0.35 A at 10 V 

Operating Temperature Range: 

-13°F to 131°F (-25°C to 55°C) 

Packaging: 

Epoxy potted plastic enclosure with exposed screw 

terminal connections 

Weight: 

2 lb (0.9 kg) 

Warranty: 



EST. SHIP 

WEIGHT 

PRICE 

46719 437 Bridgesensor, 4-20 mA/0-20 mA, 10-36 VDC 2 lb $695.00 


437 ELECTRICAL CONNECTIONS 

SCREW TERMINAL FUNCTION SCREW TERMINAL FUNCTION 

1 +DC Power 6 + Excitation 

2 -DC Power 7 Current Output 

3 -Sense 8 Amplifier CMN 

4 -Excitation 9 -Input 

5 +Sense 10 +Input 

CASE DIMENSIONS: 


421


463 Bridgesensor Signal Conditioner 



• Complete strain gauge bridge signal conditioner 

• Isolated 10 volt output 

• Bridge balance with 80% tare offset capability 


Input for 10V Output: 

5 mV to 50 mV 

Tare Adjustment Range: 

Bridge balance: -3 mV to +25 mV 

Referred to input: Equals 80% F.S. of 3 mV/V to 

+25 mV/V 

Zero Adjust: 

0 or +2 Volts 

Output Voltage Range: 

-3 to +10 Volts 

Bridge Supply: 

Voltage adjustment range: 5 to 10 Volts 

• Excitation supply capable of driving four load cells 

• AC powered 

• Rugged epoxy encapsulated design 

Load Current: 

0 to 120 mA 


-13°F to 131°F (-25°C to 55°C) 

Packaging: 

Epoxy potted plastic enclosure with exposed screw 

terminal connections 

Weight: 

18 oz (510 g) 

Warranty: 




EST. SHIP 

WEIGHT 

PRICE 

46720 463 Bridgesensor, 0-10VDC, 115 VAC 2 lb $695.00 

SCREW TERMINAL FUNCTION SCREW TERMINAL FUNCTION 

1 -Sense 6 AC 

2 -Excitation 7 +Signal 

3 +Sense 8 -Signal 

4 +Excitation 9 Output 

5 AC 10 Common 

CASE DIMENSIONS: 



API 4058G - 441/442 Bridgesensors Load Cell Signal Conditioners 

API 4058G Bridgesensor 

441/442 Bridgesensor 


API 4058G Bridgesensor: 

• User-selectable input/output ranges and excitation 

voltages 

• Convenient setup via rotary and slide switches 

• Excitation voltage at 115 mA (10 V) drives four 

350-ohm load cells 

• LED input/output signal indicators 

• Selectable voltage or current outputs 

• Functional test pushbutton 

441/442 Bridgesensor: 

• Input/output ranges and excitation voltage are 

selectable by easy-access rotary switches 

• Non-interactive zero and span control 

• Offset switch allows cancelling or “taring” of nonzero 

deadweights 

• Excitation voltage of 115 mA (10 V) drives up to 

four 350-ohm bridges 

• Input/output LoopTracker LEDs show input/ 

output status 

• Functional test push-button with fixed level output 

to facilitate setup and troubleshooting 

• Full isolation (input/output power) eliminates the 

effects of ground loops and noise 


BRIDGESENSOR 441/442 SPECIFICATIONS 

Input/Output Ranges: 

See table on next page. Other switch-selectable 

ranges possible. 

Input Impedance: 

200K ohm typical 

Output Capability: 

Voltage: ±10 VDC; at ± 10 mA 

Current: 25 mA DC; 20 V compliance 

Zero/Span Controls: 

Top-accessible, multi-turn, non-interactive 

Range: ±15% of span typical 

Excitation: 

Switch-selectable, 0-10 VDC in 1 Volt increments 

Fine adjust: ±5% via multi-turn potentiometer 

Excitation Current Capability: 

120 mA DC at 10 VDC excitation; drives up to four 

350-ohm load cells at 10 VDC 

API 4058G SPECIFICATIONS 

Input/Output Ranges: 

See table on next page. Other switch-selectable 

ranges possible. See calibration instructions for more 

complete information, or consult factory. 

Input Impedance: 

1 Megohm minimum 

Output Capability: 

Voltage: ±10 VDC; ± 10 mA 

Current: 25 mA DC; 20 V compliance 

Zero/Span Controls: 

Top-accessible, multi-turn 

Range: ±15% of span typical 


Excitation Stability: 

±.01% per degree Celsius 

Response Time: 

70 mS standard; faster responses available 

Sense Lead Compensation: 

Better than 0.01% per 1 ohm change in leadwire 

resistance 

Leadwire Resistance: 

10 ohm max for 10 VDC excitation/350-ohm bridge 

Common Mode Rejection: 

100 dB minimum 

Isolation: 

2000 V RMS minimum 


14°F to 140°F (-10°C to 60°C) 

Excitation: 

10 VDC maximum at 115 mA nominal; switchselectable, 

0-10 VDC in 1 Volt increments; fine adjust; 

±2.5% via multi-turn 

Excitation Stability: 

±0.1% per degree Celsius 

Response Time: 

70 mS standard 

Common Mode Rejection: 

Better than .02% of span per degree Celsius 


14°F to 140°F (-10°C to 60°C) 

Power: 

441: 115 VAC, ±10%, 50/60 Hz, 2.5 W max 

441 Optional: 230 VAC, ±10%, 50/60 Hz, 2.5 W max 

442: 9-30 VDC at 200 mA typical 

Dimensions: 

1.75 W x 2.75 H x 2.38 in D (not including socket) 

Warranty: 

Lifetime 

Power: 

Standard: 115 VAC, ±10%, 50/60 Hz, 2.5 W max 

Optional: 230 VAC, ±10%, 50/60 Hz, 2.5 W max 

12 VDC versions available; consult factory for availability 

Approvals: 

Model API 4058G: UL listed; 

consult factory for numbers 

Weight: 


Dimensions: 

1.75 W x 2.75 H x 2.38 in D (not including socket) 

Warranty: 



EST. SHIP 

WEIGHT 

PRICE 

22778 API 4058G Bridgesensor 2 lb $595.00 

38902 441 Bridgesensor, 115 VAC 2 lb 695.00 

38904 442 Bridgesensor, 9-30 VDC 2 lb 795.00 


423


API 4058G - 441/442 Bridgesensors Load Cell Signal Conditioners 


API 4058G INPUT/OUTPUT RANGES 

INPUT SPANS OUTPUTS VOLTAGE CURRENT 

0-5 mV 0-100 mV 0-1 V 0-8 V 0-2 mA 

0-10 mV 0-200 mV 0-2 V 2-10 V 0-10 mA 

0-20 mV 0-250 mV 0-4 V 0-10 V 2-10 mA 

0-25 mV 0-300 mV 0-5 V 0-16 mA 

0-30 mV 0-400 mV 1-5 V 4-20 mA 

0-40 mV 0-1000 mV ±5 V 0-20 mA 

0-50 mV 0-1200 mV ±10 V 

441/442 INPUT/OUTPUT RANGES 

INPUT SPANS VOLTAGE OUTPUTS CURRENT 

0-5 mV0 50 mV 0-1 V 0-20 mA 

0-10 mV0 100 mV 0-5 V 4-20 mA 

0-20 mV0 200 mV 1-5 V 

0-25 mV0 250 mV 0-10 V 

0-30 mV0 300 mV ±5 V 

0-40 mV0 400 mV ±10 V 



Amphenol ® 

RJF 544 Harsh Environment Ethernet Connection System 


• Allows an Ethernet Class D/Category 5e 

connection for 10Base-T, 100Base-TX, or 

1000Base-T networks in harsh environments 

• Sealed against fluids and dusts (IP67) 

• Shock, vibration and traction resistant 

• No cabling operation in the field 


Data Transmission: 

10Base-T, 100Base-TX and 1000Base-T networks 

Category 5e per TIA/EIA 568B and ClassD per ISO/ 

IEC 11801 

Mechanical: 

Quick push/pull coupling 

RJ-45 cordset retention in the plug: 100N in the axis 

Mating cycles: 500 min 

Environmental Protection: 

Sealing: IP67 

Salt Spray > 1000h 

Fire retardant/low smoke: UL94 V0 and NFF 16 16102, 

DIN 5510-2 

Vibrations: 10-500 Hz, 10g, 3 axes: 

no discontinuity > 10 nanos 

Thermal Shock: 5 cycles at -40° C / +100° C 

• No tools required 

• Improved EMI protection 

• Uses a standard RJ-45 cordset in protective composite 

plug to protect from shocks, dust and fluids 

• In-field cabling and grounding not necessary 


-40°F to 185°F (-40°C to 85°C) 

Applications: 

Telecom equipment, video control, robotics, industrial 

process control, CNC machines, motion control, 

tele-maintenance 



87326 RJF 544 kit $150.00 

87285 Square flange female connector 35.00 

87286 Dust cap for harsh environment receptacles 35.00 

87287 Gasket for harsh environment receptacles 5.00 

87288 Ethernet plug 35.00 

87289 Dust cap for harsh environment plugs 35.00 



425


AbleCable ® RS 232/USB Serial Smart Cable Direct, Keyboard Input Direct 



• Converts serial data such as barcode reader or scale into keyboard input to software program 

• Works with PC and MAC 

• Requires no driver installation (identifies itself as additional HID keyboard) 

• Cable draws power from USB port (no external power supply needed) 

• Test cable to be connected with adapter scale cable or connector 

• Bluetooth version allows Bluetooth connection to devices like iPad, Playbook, Android tablets 

and smart cell phones 


Baud Rate: 

9600 

Color: 

Black 

Cable Length: 

74 in (1880 mm) 

Bluetooth Cable Length: 

16 in (406 mm) 

Power: 

USB power, no external power supply 

Host: 

PC and MAC compliant 

Connection: 

DB9 male connector, Pin 2 RX, Pin 3 TX and Pin 5 

Ground USBA connector 



119919 RS-232/USB Serial Cable 1 lb $185.00 

132452 RS-232/USB Serial Cable plus Bluetooth 1 lb 260.00 

OPTIONS AND ACCESSORIES 


119064 Slimline Null Modem, gender changer DB9 female to female $10.50 

22436 Blunt-end to DB9 female, straight cable 55.00 

50749 DB9 female to DB9 female 55.00 

130789 Null Model DB9 adaptor female to male 12.00 



go-between 

Data Capture and Storage 



• LED on board for testing data transmission 

• Captures data and stores it on a USB flash drive up to 8GB (not included) 

• Transfer data to your PC using the USB flash drive 


Baud Rate: 

9600 

Data Bits: 

8 

Parity: 

None 

Power: 

Requires 5 VDC 

Customer Supplied: 

Power and USB flash drive 

Industrial Enclosure Option: 

7.5 x 7.5 x 4.5 in (19 x 19 x 12 cm) 

Latch for lock 

Warranty: 


Text file examples (actual text will be dependent on transmitted file) 

02:50PM 

11/13/2012 

GROSS 58 lb 

02:50PM 

11/13/2012 

GROSS 68 lb 



153265 go-between board $410.00 

153266 go-between industrial enclosure 500.00 

153267 go-between desk enclosure 500.00 

158778 go-between desk enclosure, EU power supply 500.00 

OPTIONS AND ACCESSORIES 


154797 Adaptor, power 5 VDC 2A 90-264 VAC, U.S. plug, UL/CUL $35.00 

125077 USB flash drive, 1 GB 15.00

Indicators/Controllers - Rice Lake Weighing Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?