Clamps & Mounts - Rute66

8033
7992
Our most popular cruise pegs! With the trusted
Magnum Quick Clamp.
U.S. Patent D411,440
8032 Small ISO-Pegs with Mounts & 1-1⁄4” Magnum
Quick Clamps (pr)
8033 Large ISO-Pegs with Mounts & 1-1⁄4” Magnum
Quick Clamps (pr)
7992 Dually ISO-Pegs with Mounts & 1-1⁄4” Magnum
Quick Clamps (pr)
U.S. Patent D405,393
4451 ISO-Wings with Mounts & 1-1/4” Quick Clamps (pr)
U.S. Patent D411,440
4435 Pilot Pegs with Mounts & 1-1/4”
Magnum Quick Clamps (pr)
4451
∏
FOOTRESTS
8032
4435
4443
U.S. Patent D411,440; D506,707 & 6,893,038
4443 Switchblades with Mounts & 1-1/4”
Magnum Quick Clamps (pr)
All ISO-Stirrups
Include Chrome
Inserts
8071
U.S. Patent D411,440
8070
This setup permits the use of the ISO-Stirrups on 1-1/4” engine guards.
8070 Small ISO-Pegs with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr)
8071 Large ISO-Pegs with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr)
Leave it to Küryakyn to come up
with a better Cruise Board system
for H-D engine guards. Built-in
heel rests & vibration isolating
rubbers provide more support
& greater comfort on your rides.
The clamp simply folds around the
engine guard & is secured with
one bolt. The interlocking tooth
adjustment securely holds the
mount in any angle. Fits all 1-1/4”
engine guards & works great
with fairing lowers too! Board
measures 8” long & 4” wide at
widest point.
7901 Cruise Boards
for 1-1/4”
Engine Guards
(pr)
W W W . Z O D I A C . N L
81

US Patent D411,440
We’ve made a
lot of friends with these. Stainless steel construction for superior
strength & hinged construction for fast simple installation. No more stripped bolt
heads common of 3-piece designs.
7940 1” I.D. Fits Some Aftermarket Engine Guards (ea)
1002 1” I.D. Fits Some Aftermarket Engine Guards (pr)
7941
1-1/8” I.D. Fits Many H-D Frame Downtubes (ea)
8073 1-1/4” I.D. Fits H-D Engine Guards (ea)
10000 1-1/4” I.D. Fits H-D Engine Guards (pr)
7942
1.35” I.D. Fits Metric Cruiser Frame Downtubes (ea)
100101 1-1/2” I.D. Fits Boss Hoss (pr)
Note:
All clamps have a 1/2” hole for peg mount.
7996 Offset Peg Mounts
(1/2”-13 mounting bolt) (pr)
4568 Replacement Mount for Küryakyn Offset, Longhorn
Offset, & Underseat Mounts for Softail (ea)
8015 Standard Peg Mount (1/2”-20 mounting bolt) (pr)
7996
8061 Short Magnum Peg Mount (1/2”-13 mounting bolt) (pr)
8088 3-1/2” Long Peg Mount (1/2”-13 mounting bolt) (pr)
8087 3-1/2” Long Peg Mount (3/8”-16 mounting bolt) (pr)
U.S. Patent D411,440
8016
An extended version of our popular 7996.
It’s
3-1/4” radius gives an incredible 6-1/2”
range of adjustment. It’s gently curved shape
keeps the peg tucked in toward the center line
of the bike for maximum comfort. Incorporating
rating
an innovative locking device, this mount is
guaranteed not to slip.
8016 Longhorn Offset Peg Mounts (pr)
7985 Longhorn Offset with 1” Magnum
Quick Clamps (pr)
7986 Longhorn Offset with 1-1/4” 1/4”
Magnum Quick Clamps (pr)
4577 Longhorn Offset with 1-1/2 ”
Magnum Quick Clamps (pr)
7986
2-1/2”
3-1/4”
U.S. Patent D411,440
This setup will allow the use of any
H-D style male mount pegs with our
innovative Magnum Quick Clamps &
Clevises for engine guard applications.
4573 1-1/2” Magnum Quick Clamp
with Clevis (pr)
7944 1-1/4” Magnum Quick Clamp
with Clevis (pr)
4576 1” Magnum Quick Clamp with
Clevis (pr)
These screws & D-Washers can be used to
replace lost or damaged pieces in any of our
Magnum style peg mounts. These mounts are
found in virtually all of our highway peg assemblies.
4538 Replacement Clevis Screws with D-Washers (set)
4508 D-Washers (pr)
82
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON

This design allows easy installation by simply drilling mounting holes in the
steel floorboard base for the adjustable mount & full-length reinforcing
plate. The entire assembly mounts to the floorboard. The reinforcing plate
adds stiffness to the floorboard to keep flex to a minimum. (The stock
rubber floorboard pads remain unaffected)
The arms are
fully adjustable front to back & are available with or without our cushy
ISO-Pegs. Cruise Arm Mark
III adjustment is limited when installed on motorcycles with engine guards.
Fits: All ’86-’09 FLST Models (except ’05-’09 FLSTN, ’05-’06 FLSTFSE, ’08-’09 FLSTSB, or ’09 FLSTC)
’84-’09 Electra Glides (except FLHTCU, ’04-’05 FLHTCSE, ’06-’09 FLHTCUSE), ’84-’91 Tour Glides (except
FLHTCU), ’98-’09 Road Glides, ’94-’09 Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE)
IMPORTANT: ’84-’08 TOURING MODELS REQUIRE SUPPORT KIT, P/N 4533! Cruise Arm Mark III is not compatible with fairing
lowers.
7914 Cruise Arm Mark lll (pr)
7915 Cruise Arm Mark lll with Small ISO-Pegs (pr)
4533 Cruise Arm Support Kit (ea)
Note: Required for installing Cruise Arm Mark III on
’84-’08 Dressers & Road Kings.
Note: Only compatible with O.E.M. H-D floorboards as shown at left.
It’s a real challenge to mount a set of highway pegs on a forward control equipped
bike. We’ve done it at last with this very adjustable set-up. Fastening between the
forward control & the footpeg, these cruise mounts accept any Küryakyn footpeg
in the primary location & any male mount footpeg in the cruise location.
7887 Peg Mounted Cruise Mounts with Male Adapters (pr)
Note: Primary foot position only accepts the following
Küryakyn Pegs: Stiletto, Switchblade, Dually, Large ISO,
Small ISO, Retro, Pilot & ISO-Wing.
ISO-Boards produced after January 1, 2005 are modified to
accept our Cruise Arm Mark III highway pegs with the help
of this kit. The revised ISO-Boards have pre-drilled holes to
accept the mounting bolts.
7917 Cruise Arm Mark III Adapter Kit (ea)
Enormous numbers of people have
asked us how they can stretch their
legs a little without spending several
eral
hundred dollars for extended
controls. Here’s the answer…
a convenient fold-forward,
comfortable cruise peg that fastens
in place of your stock peg & provides
a secondary fold-out peg 3” forward.
Replaces any H-D style male-mount peg.
4466 SwingWing Pegs, Male Mount (pr)
U.S. Patent D560,562
4468 SwingWing Peg Replacement Rubber Pads (set)
W W W . Z O D I A C . N L
∏
FOOTRESTS
83

Patent Pending
Turn your bike into a lazy boy with these great Cruise Arms! Heavy-
duty chrome arms wrap around your stock floorboards just right,
so
kick back & relax! TV remote & popcorn orn not included.
Mounts to frame, not the board. No drilling required.
Compatible with Küryakyn ISO-Boards & all styles of floorboards
currently offered by H-D.
Offered in short arm or long arm configurations to accommodate all riders.
Each configuration allows several inches of fore & aft adjustments to fine
tune footpeg position.
Not compatible with engine guards.
Accepts any H-D style Male Mount Footpeg, sold separately.
7840 Standard For Shorter Riders* (set)
7841 Extended For Taller Riders (set)
*Adjustment of Standard Version is limited on ‘07-‘09 Models. Not compatible
with oil coolers.
Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings
without engine guards
7844 Standard For Shorter Riders (set)
7845 Extended For Taller Riders (set)
Note: Not compatible with oil coolers.
Standard versions are intended for riders with a 30” or shorter
inseam. Extended versions are intended nded for riders with a 31” or
longer inseam. These guidelines are approximations only. We
recommend taking time to sit on your bike, hold your feet in position,
& then make your selection based on the photos we have provided.
7841
7844
Extended
Standard
Always use Anti-Seize when
using chrome fasteners &/or
nylon lock nuts.
84
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON

We’ve taken our tried & trued Mustache Bar & brought it into the 21st
Century. The great function of the mustache bar has stayed the same -
adding the extra peg positions you need on those cramp-inducing hauls.
The difference between old & new lies within the ability to be adjusted to fit
virtually any rider. Due to its cleverly designed clamp system, this mustache
bar can be moved up or down the downtubes & the bar can be rotated to
provide multiple fore & aft adjustments. Ride on in comfort! Accepts any H-D
style male-mount pegs (sold separately).
∏
FOOTRESTS
7861 Fits: All ’00-’09 FLST, FXST, & Rocker Models (ea)
7862 Fits: All ’91-’09 Dyna Models (ea)
Footpegs Sold
Separately
You might just think you died & went to heaven when you go on a long putt with
this jewel. Just put your feet up, lean back & enjoy. Sure gets the kinks out of those
knees. Available for all ’86-’99 FLST Models without engine guards.
7950 Mustache Bar without Pegs for ’86-’99 FLST
Warning: Küryakyn does not recommend using Mustache Bars on ’85-’99 FXST Models. This product cannot be
used safely on these bikes with forward controls because of the close proximity of the peg to the brake pedal.
These super adjustable cruise pegs for Sportsters rs
are quick & easy to install & provide a wide range
of adjustment. They bolt securely to the welded
cross brace near the bottom of the downtubes &
work on models with or without forward controls.
Accepts any H-D style male mount footpegs (sold
separately).
7868 Fits: ’04-’09 Sportster (ea)
7869 Fits: Late ’84-‘03 Sportster (ea)
W W W . Z O D I A C . N L
85