NEW - Rute66

PERFORMANCE MACHINE IMAGESERIES WHEELSA Performance Machine wheel beginslife as a raw aluminum ingot. Using highpressure and temperature, the nondirectionalgrain of aluminum is changedto a high integrity, multidirectional grainstructure of a forging. The aluminumremains solid throughout the processas the forging dies come together andchange the shape of the wheel. Theresulting radial grain direction places thehighest material strength in the samedirection as the operating loads. Thecomplete forging is CNC Lathe turned,then placed on a CNC mill and sculptedinto one of 14 patterns. PM’s finishingdepartment hand polishes each wheelto a mirror like shine or applies a highquality show chrome finish. A limitednumber of wheel designs is available inContrast Cut anodized black with rawmachined contrasts, or in Contrast Cut“Platinum” finish where the contrastsare polished in the best PM tradition.Note: Due to the variety of PM wheels(over 4.500 models and applications!)these wheels are build upon order. Allow6 weeks for building and shipping.NEWDOMINOThe Domino takes nine spokes off ofthe hub, splits them into 18 and thenmerges into the rim with stylish speeddots/ A design that will look goodon both modern and vintage bikes.Available in polished and chrome.GATLINThe Gatlin is an entirely fresh design thatseems to defy all previous perceptionof what can be carved from aluminum.The spokes burst from the hub intoa web before splitting into individualtalons and meeting the rim. A “Wild”wheel design in the best PM tradition.Available in polished and chrome.NEWEL DORADOThe El Dorado represents a totaldeparture from previous PM designsand allows the wheel center to flare outbefore the spokes emerge, split andtaper in to the rim. Unbelievable detailis complimented by the unique spokeshape and PM Speed Dots. Available inpolished and chrome.NEWHEATHENThe Heathen wheel begins as 7 spokesand splits into 14 ornate tendrils beforeblending into the rim center and thenfollows a complimentary design on theouter edge of subtly curving rim face.Available in polished, chrome, ContrastCut black with raw machined contrasts,as well as Contrast Cut “Platinum” finishwhere the contrasts are polished in thebest PM tradition.CARTELCurvaceous is the only way to describethe Cartel wheel. Seven curved spokesadvance from the hub, split into 14spars before converging into PM’sbeautifully arced Contour rim lip.The effect is pretty astonishing andgives the wheal a near liquid chromeappearance. Available in fully polished,chrome plated and Contrast Cut blackwith unpolished aluminum accents.NEW11-002GASSERThe Gasser is five spokes of vintagestyled elegance flowing smoothly intothe rim. In fact, even the rim itself hasbeen revamped with a Contour rim lip.The result is graceful arc from spoke totire. Available in fully polished, chromeplated and Contrast Cut black withunpolished aluminum accents.

TOURING MODELS Year Front ID Rear IDFLH, Front single disc 1973-1983 1203 1254all FLH & FLT series models 1984-1999 1220 1277all FLH & FLT series models 2000-2001 1228 1287all FLH & FLT series models 2002-2007 1228 1290all FLH & FLT series models without ABS 2008 1202 1252all FLH & FLT series models with ABS 2008 1204 1253SOFTAIL MODELS Year Front ID Rear IDFLST 1988-1999 1216 1274FLST 2000-2002 1229 1285FLSTC 2000-2006 1229 1285FLSTC 2007 1241 1285FLSTC 2008-up 1241 1256FLSTF 1990-1999 1221 1274FLSTF 2000-2006 1229 1285FLSTF 2007 1239 1296FLSTF 2008-up 1239 1256FLSTN 2007 1241 1285FLSTN 2008-up 1242 1256FLSTS 1997-1999 1217 1274FLSTS 2000-2006 1231 1285FLSTSB 2008-UP 1244 1256FLSTSC 2000-2006 1231 1285FXCW 2008-up 1243 1263 (8.50” wide)FXCWC 2008-up 1243 1263 (8.50” wide)FXST 1984-1999 1214 1274FXST 2000-2005 1227 1285FXST 2006 1227 1294FXST 2007 1240 1296FXSTB 2000-2005 1227 1285FXSTB 2006 1227 1294FXSTB 2007 1240 1296FXSTB 2008-up 1240 1256FXSTC 2007 1240 1296FXSTC 2008-up 1240 1256FXSTD Deuce Front dual disc 2003-2004 1233 1285FXSTD Deuce Front single disc 2000-2006 1227 1285FXSTD Deuce Front single disc 2007 1240 1285FXSTS 1988-1999 1217 1274FXSTS 2000-2005 1230 1285FXSTS 2006 1230 1294FXSTSB 1988-1999 1217 1274Note: Due to the wide variety of PM wheels (over 4.500 models and applications) these wheels are build to order. Allow6 weeks building/shipping time. Contact your Zodiac Dealer for more details.Note: 5”, 5 1/2”, 6”, 7” and 8 1/2” wide wheels for use on models thru 1999 require the use of 2 1/2” inner diameter discbrake rotor, sprocket and/or drive pulley. All other wheels take stock style discs, pulleys and/or sprockets, the exception arewheels for the V-Rod, which are available in your choice of ready to take OEM discs, or ready to take PM discs.ID CODES FOR CUSTOM AND WIDE TIRE APPLICATIONSFront in Wide Glide forks and 1984-1999 style dual discs 1208Front in Wide Glide forks and 1984-1999 style single disc 1214Front in Wide Glide forks and 2000-up style single disc, 3/4” axle 1227Rear in Softail and Hardtail style frames 1274Rear in Softail and Hardtail style frames with PM DriveSide rear brake 1275Rear in Softail and Hardtail style frames with PM Sprocket Brake 129811-005

All non-ABS equipped Sportster, Big Twin with stockor aftermarket disc and V-Rod with PM discsPolished Contrast Cut Chrome Platinum CutYellow 799400 799407 799410 799405Pink 799401 799408 799411 799409Grey 799406 799435 799416 799440Blue 799413 799439 799414 799443FXDL 2006 & 2007 with stock front disc(hub 1238A)Polishedwith hubContrast Cutwith hubChromewith hubPlatinum Cutwith hubYellow 799402 799410 799404 799415Pink 799434 799411 799417 799424ABS equipped FLH & FLT series models(hubs 1204, 1253)Polished Contrast Cut Chrome Platinum CutV-Rod with stock discs(hub 1205, 1232A, 1257A, 1291A)Polished Contrast Cut Chrome Platinum CutYellow 799405 799415 799445 799446Pink 799418 799424 799419 799436Grey 799430 799438 799440 799442Blue 799437 799441 799443 799444ABS-equipped V-Rod with stock discs(hub 1206A, 1258A)Polished Contrast Cut Chrome Platinum CutYellow 799415 799445 799447 799448Pink 799449 799450 799451 799452Grey 799453 799454 799455 799456Blue 799457 799458 799459 799460Yellow 799402 799410 799404 799415Pink 799434 799411 799417 799424HOW TO CREATE A PART NUMBER FOR YOUR PM WHEEL:Step 1.Add CH for a chrome wheel, BM for ContrastCut, BMP for Platinum Cut or leave blank when you want a polished wheelStep 2.Select the Wheel Size and Design codefrom the table aboveStep 3.Select the ID Number from the tableon the left pageYOUR COMPLETED PARTNUMBER IS :CARTEL HEATHEN GASSER DIESEL11-007

3) Select the FinishFor polished finish: Leave BLANKFor chrome finish add -CHFor Contrast Cut (Cartel, Gasser, Torque and Heathen ONLY) add-BMFor Platinum Cut (Heathen ONLY) add -BMPYOUR COMPLETED PART NUMBER IS: 0093- . . . . . . . .- . . .799427 Red price code for polished Big Twin pulleys799431 Red price code for chrome, Contrast Cut andPlatinum Cut Big Twin pulleys799428 Blue price code for polished V-Rod pulleys799432 Blue price code for chrome, Contrast Cut andPlatinum Cut V-Rod pulleysPM IMAGE SERIES PULLEYSThe Image series forged aluminum pulley has long been a favorite of the custom builder and enthusiast. Its finely machinedsurface perfectly mirrors the pattern of the PM wheels behind it for a complete custom look. They also feature Hard Anodizedteeth for longer wear. PM pulleys are available for 1984 to present Big Twins. Limited styles are available for V-Rod and aredesigned to work with the stock cushion drive.All PM pulleys work with stock wheels as well as PM wheels. However, use with an OEM Harley wheel does not guaranteealignment with the wheel pattern.Cartel Cartel Domino El DoradoGatlin/Gasser Gatlin/Gasser Heathen HeathenHooligan Judge Marquee RouletteTantrum Torque /Strut Torque/ Strut Wrath11-011

RICK’S ONE PIECE WHEELS FOR V-RODRick’s has taken wheel design a step further ahead with these one-pieceforged wheels. Carefully polished surfaces in a high-end finish in everydetail and corner of the billet design are the trademark of Rick’s wheels.Available in 5 great looking designs. Rick’s one-piece forged wheels forV-Rod models are available for use with stock disc brake rotors or foruse with Rick’s design brake rotors and pulley. These wheels are build toorder. Please specify the following when ordering:1.) Model and year of the motorcycle2.) For use with OEM or Rick’s brake rotors3.) Wheel design4.) Size5.) Polished, gloss black or matt blackPrice codes are for polished wheels, there is a surcharge for theoptional gloss or matt black finish.799795 Surcharge for gloss or matt blackSeven SinsOne-PieceDesign #FW3 for OEMDiscsfor Rick’s discsMikeOne-PieceDesign #FW9 for OEMDiscsfor Rick’s discsRodderOne-PieceDesign #FW6 for OEMDiscsfor Rick’s discsPrice codesSpokeOne-PieceDesign #FW20 for OEMDiscsRed 799597 Green 799599 Blue 799601 Grey 799603 Indigo 799593Yellow799598 Pink 799600 Orange 799602 White 799592for Rick’s discsFreestyleOne-PieceDesign # FW11 for OEMDiscsfor Rick’s discs18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00n/a 18 x 5.50 n/a 18 x 5.50 n/a 18 x 5.50 n/a 18 x 5.50 n/a 18 x 5.50n/a 18 x 8.00 n/a 18 x 8.00 n/a 18 x 8.00 n/a 18 x 8.00 n/a 18 x 8.00n/a 18 x 9.00 n/a 18 x 9.00 n/a 18 x 9.00 n/a 18 x 9.00 n/a 18 x 9.00n/a 18 x 10.50 n/a 18 x 10.50 n/a 18 x 10.50 n/a 18 x 10.50 n/a 18 x 10.50RICK’S ONE PIECE WHEELS FOR BIG TWINSRick’s has taken wheel design a step further ahead with these one-pieceforged wheels. Carefully polished surfaces in a high-end finish in everydetail and corner of the billet design are the trademark of Rick’s wheels.Available in 5 great looking designs and even in the new “Big Wheel”sizes, 20” and 23” diameter. Rick’s one-piece forged wheels are build toorder. Please specify the following when ordering:Price codes are for polished wheels, there is a surcharge for the optionalgloss or matt black powdercoat finish.799795 Surcharge for gloss or matt black1.) Model and year of the motorcycle2.) Wheel design3.) Size4.) Front or rear5.) For 3/4”, 1” or 25 mm wheel axle6.) For use with what make and style brake rotors, single or dual7.) For use with what make and style brake calipers8.) For use with what make and style pulley or chain sprocket9.) Polished, gloss black or matt blackSeven Sins One-PieceDesign # FW311-012Mike One-Piece Design# FW9Rodder One-Piece Design# FW6Price codesSpoke One-Piece Design# FW20Freestyle One-Piece Design# FW1118 x 4.00 18 x 4.00 18 x 4.00 18 x 4.00 18 x 4.0018 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.5018 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.0018 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 1818 x 9.0020 x 10.50 N/A 20 x 10.50 20 x 10.50 N/A18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.5021 x 2.15 21 x 2.15 21 x 2.15 21 x 2.15 21 x 2.1523 x 3.50 N/A 23 x 3.50 N/A N/ARed 799604 Pink 799607 Grey 799610 Brown 799591 Purple 799588Yellow799605 Blue 799608 Black 799611 Indigo 799590Green799606 Orange 799609 White 799612 Mint 799589

NEWWHEELS FOR TON PELS’ SIGNATURE SERIES SINGLESIDED SWING ARMThese one-piece forged wheels are made by Rick’s to boltstraight on to the Ton Pels’ Signature Series single sidedswing arm. Wheels feature a billet aluminum hub cap asthe finishing touch. A high-end finish in every detail andcarefully polished surfaces throughout every corner of thebillet design are the trademark of Rick’s wheels. Availablein 3-spoke Mike, 5-spoke Rodder and 7-spoke Seven Sindesign in 18” diameter and 9” wide for use with 240 or 250wide rear tires.18 x 9.00 Rick’s One-Piece wheels797231 Seven SinRICK’S BILLET ALUMINUM WHEELSRick’s wheels are made in Germany by dedicated craftsmenfrom the finest material available. Contrary to most otherwide wheels on the market, which use car type rims, thesewheels feature the correct rim design for use with tubelessmotorcycle tires. These custom wheels are TÜV approvedfor use in motorcycles and up to 300 KG load range. Wheelsare a three-piece design with 38 bolts holding motorcycletype rim to the flange. Wheel uses a large O-ring as a rimto center seal. The bolts are also glued as an extra securityto prevent for coming (or taking) apart. Available with singleflange or dual flange hub for use in Wide Glide front ends orrear, or dual flange hub for Narrow Glide front ends. Hubstake 2000 to present style disc brake rotors. Wheels must bespaced to the desired width. Available in high gloss polishedfinish in almost any width from 2 1/2” thru an incredible14 1/2”, and diameters from 15” thru 21”.NEW18 x 9.00 Rick’s One-Piece wheels797230 RodderNEWSOLID DISCThe Rick’s wheel that started it all. These top of the linebillet aluminum wheels are designed with the stock Fat Boywheels in mind. Available from stock in 15. x 8. for usewith our Avon 230/60VB15 “Big Foot” tire in your choiceof machined or polished finish, and available upon specialorder in many other sizes for front or rear applications.721189 15” x 8” Machined finish721190 15” x 8” Polished finishSEVEN SINInspired by thewheels used on theRoman’s chariots,Rick’s designedthis superb finecut7-Spokewheel with justone thing in mind:Performance.18 x 9.00 Rick’s One-Piece wheels797232 Mike11-013

10-SPOKE “CLASSIC STEVE”Following upon the success of the5-spoke Bob, Rick’s designed the10-spoke “Classic Steve” to give yourbike that nostalgic look. CNC machinedfrom billet aluminum with a polishedfinish.5-SPOKE “BOB”A five spoke design with fluent lines.Rick’s basic idea was to launch a newwheel along with his own manufactureddisc wheels. Rick’s is setting a newmilestone for custom parts in highendquality. All the components of thedesign-wheel “Bob” are CNC-made andpolished to perfection. Don’t forget! Onlyhigh-quality can be high-performance!5-SPOKE “APOLLO 5”With their 5 dual spokes these wheelslook villain, but are as strong as youmay expect from made-in- GermanyTÜV approved wheels.3-SPOKE “MIKE”20-SPOKE “SUPER STEVE”3-SPOKE “H.LECTOR”Subtle, elegant, what more can be said?A true proof that designing is an art!Polished finish.Twenty rectangular spokes connectthe rim halves with the hub for anextraordinary appearance. The “SuperSteve” has a high gloss polished finishlike every Rick’s wheel.Was this wheel named after HannibalLector, the sentenced-for-life criminalfrom the thriller “The Silence of theLambs”? We don’t know for sure, butfact is that this is one of the mostthrilling wheel designs ever.3-SPOKE “MIKE CUT-OUT”The cut outs emphasize the stylisticlooks and reduce weight. The “Mike Cut-Out” is a wheel design that is adaptableto many custom styles.11-014

3-SPOKE “HOLLISTER”Remember what happened on the fourthof July at Hollister, California back in1947. Ask any “Old Style Biker” and hewill tell you that the 4th of July BikerRiot changed the biker scene forever. Itwas that day that the 1% Biker Rule wasborn. Rick’s designed this cool 3-spokewheel which really reflects that 1% day.4-SPOKE “FREESTYLE”The most elegant 4-Spoke design,featuring smooth rounded curves andexactly billeted lines define one ofthe most erotic wheels in the Rick’scollection.All Rick’s wheels are build toorder. For available sizes pleaserefer to the next two pages foruse on Big Twin and Sportstermodels. Wheels for V-Rod modelsare listed on the two pagesafter there. Please specify thefollowing when ordering:1.) Model and year of themotorcycle2.) Wheel design3.) Size (diameter and width)4.) Front or rear5.) For 3/4”, 1” or 25 mm wheelaxle6.) For use with what make andstyle brake rotors, single or dual7.) For use with what make andstyle brake calipers8.) For use with what make andstyle pulley or chain sprocket9.) Polished, gloss black or matblack centerPrice codes are for polished wheels,there is a surcharge for the optionalgloss or mat black finish of rim orcenter. For a completely black wheelthe surcharge will be doubled.DAYTONAThe Daytona design is pure customstyle extravaganza, a detailed CNCmachined design for those looking fora little bit more.BAD FELLAZRick’s mixed two of the most classicdesigns used for choppers, the MalteseCross and the Skull, into this greatlooking 4-spoke wheel. It’s all in thename “Bad Fellas”..799794 Surcharge for gloss ormat blackDelivery time is usually 2-3 weeks forpolished wheels and 3-4 weeks forblack wheels.GIMMI 5When Rick’s came with this great andsturdy looking 5-spoke wheel designthe catchy name was easily found.This design will fit at home on hardcorechoppers, hot rod style customs andcustom bikes alike.11-015

Solid CNC 5-spoke Bob 10-spoke Steve 3-spoke H. Lector 5-Spoke Apollo 5 3-spoke Mike 3-spoke Mike Cut-OutDesign number 00 Design number 01 Design number 02 Design number 07 Design number 08 Design number 09 Design number 0316 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.516 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.016 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.516 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.5016 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.0016 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.5016 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.0016 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.5016 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.5016 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.0017 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.5017 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.0017 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.5017 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.5017 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.0017 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.5017 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.5017 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.0017 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.5017 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.5017 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.5018 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.5018 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.5018 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.0018 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.5018 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.0018 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.5018 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.5018 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.0018 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.0018 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.0018 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.5018 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.5018 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.5018 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.5018 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.5019 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.5019 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.0021 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.5021 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 2.50Price codes Price codes Price codes Price codes Price codes Price codes Price codesDesign number 00 Design number 01 Design number 02 Design number 07 Design number 08 Design number 09 Design number 03Solid CNC 5-spoke Bob 10-spoke Steve 3-spoke H. Lector 5-Spoke Apollo 5 3-spoke Mike 3-spoke Mike Cut-Out 5Grey 799614 Grey 799633 Grey 799650 Grey 799709 Grey 799650 Grey 799670 Grey 799650Red 799616 Red 799625 Red 799651 Red 799644 Red 799651 Red 799659 Red 799651Yellow 799617 Yellow 799626 Yellow 799652 Yellow 799645 Yellow 799652 Yellow 799660 Yellow 799652Green 799618 Green 799653 Green 799646 Green 799653 Green 799661 Green 799653Purple 799619 Purple 799628 Purple 799654 Purple 799647 Purple 799654 Purple 799662 Purple 799654Orange 799620 Orange 799629 Orange 799655 Orange 799668 Orange 799655 Orange 799663 Orange 799655Pink 799621 Pink799630 Pink 799656 Pink 799648 Pink 799656 Pink 799664 Pink 799656Black 799622 Black 799631 Black 799657 Black 799649 Black 799657 Black 799665 Black 799657Brown 799623 Brown 799632 Brown 799658 Brown 799667 Brown 799658 Brown 799666 Brown 799658Blue 799615 Blue 799624 Blue 799671 Blue 799643 Blue 799671 Blue 799669 Blue 799671White 799701 - - White 799710 - White 799595 -Mint 799699 Mint 799673 Mint 799672 Mint 799711 Mint 799672 Mint 799596 Mint 799672Indigo 799700 Indigo 799674 - Indigo 799712 - Indigo 799594 -11-016

3-Spoke Hollister 20-Spoke Super Steve 3-Spoke Daytona 4-Spoke Bad Fellaz 4-Spoke Freestyle 7-Spoke Seven Sin 5-Spoke Gimmi 5Design number 04 Design number 05 Design number 06 Design number 10 Design number 11 Design number 12 Design number 1316 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.5 16 x 3.516 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.0 16 x 4.016 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.5 16 x 4.516 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.50 16 x 5.5016 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.00 16 x 6.0016 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.50 16 x 6.5016 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.00 16 x 7.0016 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.50 16 x 7.5016 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.50 16 x 8.5016 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.00 16 x 9.0017 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.50 17 x 3.5017 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.00 17 x 4.0017 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.50 17 x 4.5017 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.50 17 x 5.5017 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.00 17 x 6.0017 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.50 17 x 6.5017 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.50 17 x 7.5017 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.00 17 x 9.0017 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.50 17 x 10.5017 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.50 17 x 11.5017 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.50 17 x 12.5018 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.5018 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.50 18 x 4.5018 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.00 18 x 5.0018 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.50 18 x 5.5018 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.0018 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.50 18 x 6.5018 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.50 18 x 7.5018 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.00 18 x 8.0018 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.00 18 x 9.0018 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.00 18 x 10.0018 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.50 18 x 10.5018 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.50 18 x 11.5018 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.50 18 x 12.5018 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.50 18 x 13.5018 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.50 18 x 14.5019 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.50 19 x 2.5019 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.0021 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.50 21 x 2.5021 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50 21 x 3.50Price codes Price codes Price codes Price codes Price codes Price codes Price codesDesign number 04 Design number 05 Design number 06 Design number 10 Design number 11 Design number 12 Design number 133-spoke Hollister 20-Spoke Super Steve 3-Spoke Daytona 4-Spoke Bad Fellaz 4-Spoke Freestyle 7-Spoke Seven Sin 5-Spoke Gimme 5Grey 799713 Grey 799677 Grey 799677 Grey 799687 Grey 799775 Grey 799775 Grey 799709Red 799718 Red 799678 Red 799678 Red 799688 Red 799706 Red 799706 Red 799644Yellow 799714 Yellow 799679 Yellow 799679 Yellow 799689 Yellow 799776 Yellow 799776 Yellow 799645Green 799721 Green 799680 Green 799680 Green 799690 Green 799777 Green 799777 Green 799646Purple 799719 Purple 799681 Purple 799681 Purple 799691 Purple 799705 Purple 799705 Purple 799647Orange 799720 Orange 799682 Orange 799682 Orange 799692 Orange 799778 Orange 799778 Orange 799668Pink 799717 Pink 799683 Pink 799683 Pink 799693 Pink 799779 Pink 799779 Pink 799648Black 799722 Black 799684 Black 799684 Black 799694 Black 799780 Black 799780 Black 799649Brown 799716 Brown 799685 Brown 799685 Brown 799773 Brown 799781 Brown 799781 Brown 799667Blue 799715 Blue 799686 Blue 799686 Blue 799774 Blue 799782 Blue 799782 Blue 799643White 799723 White 799704 White 799704 White 799697 - - White 799710Mint 799724 Mint 799702 Mint 799702 Mint 799696 Mint 799706 Mint 799707 Mint 799711Indigo 799613 Indigo 799703 Indigo 799703 Indigo 799695 Indigo 799708 Indigo 799708 Indigo 79971211-017

RICK’S WHEELS FOR V-RODSolid CNC 5-spoke Bob 3-spoke Mike 10-spoke Steve 5-Spoke Apollo 5 3-spoke Mike Cut-Out 3-spoke H. LectorDesign number 00 Design number 01 Design number 09 Design number 02 Design number 08 Design number 03 Design number 07Discs OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.5018 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.5018 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.0018 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.0018 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.0018 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.0018 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.5018 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.5018 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.5019 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00Price codes Price codes Price codes Price codes Price codes Price codes Price codesDesign number 00 Design number 01 Design number 09 Design number 02 Design number 08 Design number 03 Design number 07Solid CNC 5-spoke Bob 3-spoke Mike 10-spoke Steve 5-Spoke Apollo 5 5-Spoke Mike Cut-Out 3-spoke H. LectorBlue 799757 Blue 799757 Blue 799764 Blue 799764 Blue 799764 Blue 799764Red 799758 Red 799758 Red 799765 Red 799765 Red 799765Yellow 799759 Yellow 799759 Yellow 799766 Yellow 799766 Yellow 799766 Yellow 799796Green 799760 Green 799760 Green 799760 Green 799767Pink 799761 Pink 799761 Pink 799761Grey 799754 Grey 799762 Grey 799754 Grey 799585 Grey 799585 Grey 799585White 799756 White 799756 White 799587 White 799587 White 799587Black 799787 Black 799787 Black 799770Indigo 799755 Indigo 799755 Indigo 799586 Indigo 799584 Indigo 799584 Indigo 799586 Indigo 799797Orange 799763 Orange 799768Purple 799793 Purple 799783 Purple 799783 Purple 799783 Purple 799792Rick’s wheels for V-Rod models are for use with OEM disc brake rotors or, for that perfect look, Rick’s matching disgn discrotors as found on following pages.Rick’s wheels are build to order. Please specify thefollowing when ordering:1.) Model and year of the motorcycle2.) For use with OEM or Rick’s brake rotors3.) Wheel design4.) Size5.) Polished, gloss black or matt blackPrice codes are for polished wheels, there is a surcharge forthe optional gloss or matt black finish.799795 Surcharge for gloss or matt blackDesign 13 Design 04Design 00 Design 08 Design 09 Design 0211-018

RICK’S WHEELS FOR V-ROD3-Spoke Hollister 4-Spoke Bad Fellaz 4-Spoke Freestyle 7-Spoke Seven Sin 5-spoke Gimmi 5 3-Spoke Daytona 20-Spoke Super SteveDesign number 04 Design number 10 Design number 11 Design number 12 Design number 13 Design number 06 Design number 05Discs OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s OEM Rick’s17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.50 - 17 x 12.5018 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.50 18 x 3.5018 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.00 18 x 6.0018 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.00 - 18 x 8.0018 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.00 - 18 x 9.0018 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.00 - 18 x 10.0018 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.50 - 18 x 10.5018 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.50 - 18 x 11.5018 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.50 - 18 x 13.5019 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00 19 x 3.00Price codes Price codes Price codes Price codes Price codes Price codes Price codesDesign number 04 Design number 10 Design number 11 Design number 12 Design number 13 Design number 06 Design number 053-Spoke Hollister 4-Spoke Bad Fellaz 4-Spoke Freestyle 7-Spoke Seven Sin 5- Spoke Gimmi 5 3-Spoke Daytona 20-Spoke Super SteveBlue 799764 Blue 799764 Blue 799764 Blue 799764 Blue 799764 Blue 799786 Blue 799579Red 799765 Red 799581Yellow 799796 Yellow 799796 Yellow 799796 Yellow 799796 Yellow 799796 Yellow 799789 Yellow 799580Green 799767 Green 799767 Green 799767 Green 799767 Green 799767 Green 799798Grey 799788 Grey 799788White 799799 White 799583Black 799770 Black 799770 Black 799770 Black 799770 Black 799770 Black 799770 Black 799770Indigo 799797 Indigo 799797 Indigo 799797 Indigo 799797 Indigo 799797 Indigo 799771 Indigo 799582Orange 799768 Orange 799768 Orange 799768 Orange 799768 Orange 799768Purple 799792 Purple 799792 Purple 799792 Purple 799792 Purple 799792 Purple 799785 Purple 799785Design 07Design 05Design 03Design 06Design 11Design 10Design 01Design 1211-019

BILLET ALUMINUM “SUPER-ASS” 8” X 15” REARWHEELThese top of the line billet aluminum rear wheels are designedwith the stock Fat Boy wheels in mind and allow you to fit thesuper wide Avon 230/60VB15 “Big Foot” rear tire. Contraryto most other wide wheels on the market, which use cartype rims, these wheels feature the correct rim design foruse with tubeless motorcycle tires. These custom wheelsare TÜV approved for use in motorcycles and up to 300 KGload range. Wheels are a three-piece design with 38 boltsholding the extreme wide 8” x 15” motorcycle type rim tothe flange. Wheel uses a large O-ring as a rim to center seal.The bolts are also glued as an extra security to prevent forcoming (or taking) apart. Hub must be spaced to the desiredwidth. Available in your choice of machined or high glosspolished finish.721189 Machined finish721190 Polished finishRICK’S STAINLESS STEEL DISC BRAKE ROTORSEmphasize the good looks of your Rick’s wheels with these matching design disc brake rotors. Made from Stainless Steel withthe same quality standards polished finish. Discs fit all Rick’s wheels in conjunction with OEM or aftermarket brake calipers for1984 thru 1999, as well 2000 to present models. Discs also fit 1984 thru 1999 stock style wheels, except rear on FLH/FLTmodels 1987 to present. Available in various designs and 10”, 11 1/2”, 12,6” and 13” diameter.Apollo 5 Bad Fellas Bob, left Bob, rightClassicSteveFreestyle,leftFreestyle,rightGimmi 510” 799745 798991 799725 799726 799733 798985 798986 N/A11 1/2” 799746 798992 799727 799728 799734 798987 798988 79899812.6” 799747 N/A 799729 799730 N/A N/A N/A N/A13” 799748 798993 799731 799732 799736 798989 798990 N/A11-020H.Lector,leftH.Lector,rightHollister,leftHollister,rightMikeMike Cut-OutRodderSeven Sin10” N/A N/A N/A N/A 799749 798995 N/A N/A11 1/2” 799739 799740 798983 798984 799750 798996 798994 79899912.6” 799741 799742 N/A N/A N/A N/A N/A N/A13” 799743 799744 N/A N/A 799752 798997 N/A N/A

RICK’S HIGH-END BILLET ALUMINUM FINAL DRIVE PULLEYSCNC machined from billet aluminum with a polished finish. Rick’s pulley designs are made to match with Rick’s wheels.Available for use with 20 mm, 1”, 1 1/8” belts for Big Twin models as well as 1 3/8” and 1” wide belt for use on V-Rod models.Pulleys for V-Rod models use the stock drive cushions in the rear wheel.Application guide:Type:For all Dyna and Softail models thru 2005 with 1 1/8” belt, use typeAFor use on models with a Right Side Drive transmission, use typeBFor 2007 to present Softail FXTSB, FXSTC and FLSTF models, factory equipped with 200-series rear tire, use type CFor 2007 FXD Dyna models and 2007 to present Softail, except those with 200-series rear tire, use typeDFor 2006 Softail models factory equipped with 200-series rear tire, use typeEFor 2006 FXD Dyna models and 2006 Softail models, except those with 200-series rear tire, use typeFFor 2002 to present V-Rod models with 1 3/8” Belt, use typeGFor 2007 to present V-Rod models with 28 mm Belt, use typeHSome designs of these pulleys are also available on Special Order for Sportster and VRSCX models. Please check with theZodiac dealer for price and delivery.Type Width Tooth BOB STEVE MIKE MIKE FREE BAD APOLLO 5CUT-OUT STYLE FELLAZA. 1 1/8” 61 797100 797110 797120 797130 797140 797150 797160A. 1 1/8” 65 797102 797112 797122 797132 797142 N/A N/AB. 1 1/8” RSD 61 797101 N/A N/A N/A 797141 797151 797161C. 20 mm 66 797103 797113 797123 797133 797143 797153 797163D. 1” 66 797104 797114 797124 797134 797144 797154 797164E. 20 mm 70 797105 797115 797125 797135 797145 797155 797165F. 1 1/8” 70 797106 797116 797126 797136 797146 797156 797166G. 1 3/8” 72 797107 797117 797127 797137 797147 797157 797167H. 28 mm 72 797108 797118 797128 797138 797148 797158 797168Type Width Tooth SOLID HOLLISTER H.LECTOR SEVEN GIMMI 5 RODDERDISCSINA. 1 1/8” 61 N/A 797180 797190 797200 797210 797220A. 1 1/8” 65 797172 797182 797192 797202 797212 797222B. 1 1/8” RSD 61 797171 797181 797191 N/A N/A N/AC. 20 mm 66 N/A 797183 797193 797203 797213 797223D. 1” 66 797174 797184 797194 797204 797214 797224E. 20 mm 70 797175 797185 797195 797205 797215 797225F. 1 1/8” 70 797176 797186 797196 797206 797216 797226G. 1 3/8” 72 797177 797187 797197 797207 797217 797227H. 28 mm 72 N/A 797188 797198 797208 797218 79722811-021

SPEED-POINT ONE PIECE ALUMINUM WHEELS3-SPOKEThese one-piece aluminum wheels are smooth looking andexceed everything you have ever imagined about opticaleffect and performance. The “Form following function” inits purest way. Due to the special design even the widest10.50” wheels look sleek and slim. Speed-point wheelsweigh 3 to 4 KG less than comparable aluminum wheels.The 9” and 10.50” wide rear wheels have off set spokes tomake them look impressive but yet Super Smooth.Wheels come in your choice of plain aluminum, polished, orblack powder coated finish. Wheels have a counter sunk tirevalve and come with wheel bearings as used in the 2000 topresent models.Available in 16” X 4.00”, 16” X 9.00”, 17” X 6.50”,18” X 4.00”, 18” X 9.00”, 18” X 10.50”, and 21” X 2.75”with single or dual flange hubs. Wheels are available for usewith 1984 thru 1999 or 2000 to present disc brake rotors,and Big Twin early wide style, late narrow style or Sportsternarrow style pulleys.5-SPOKE10-SPOKE11-022

HOW TO CREATE A PART NUMBER FOR YOUR WHEELS:1.) SELECT THE FRONT OR REAR HUB ID NUMBER FROM THE LIST BELOWIf you have changed the front end of your bike, make sure you select the appropriate ID code for the front end that isactually used in you’re motorcycle. This information tells us what hub to use in your wheel.FRONT WHEEL HUB ID NUMBERS:Hub: Single Flange 15) Dual Flange 2Fork: FXST 34) FLST 4Model: 1984-1999 53) 2000-up 6REAR WHEEL HUB ID NUMBERS:Hub: Single Flange 15) Dual Flange 2Pulley: 1.125” Narrow 34) 1.500” Wide 4Model: 1984-1999 53) 2000-up 62.) SELECT THE WHEEL DESIGN AND SIZE FROM THE LIST BELOWThis will create a DESIGN/SIZE code. This creates a COMPLETED part number when combined with the hub ID number.As there are numerous possible combinations, there is also a price code given.Wheel designs & Size codesFRONT WHEEL 21” X 2.75” 18” X 4.0” 16” X 4.0”3-Spoke 18 11 225-Spoke 19 13 2310-Spoke 20 15 24REAR WHEEL 18” X 4.0” 18” X 9.0” 18” X 10.5” 17” X 6.5” 16” X 9.0”3-Spoke 11 12 35 26 305-Spoke 13 14 36 31 3210-Spoke 15 16 37 33 343.) SELECT THE FINISH OF YOUR WHEEL(S) FROM CHART BELOWPart numbers must be completed with the finish of your choice, again various combinations possible. Use the price codetogether with the completed part number to order.Polished = P Black = B Natural aluminum = MHOW TO CREATE A PART NUMBER TO ORDER YOUR SPEED-POINT WHEELS:Step 1.FinishStep 2.Wheel design & SizeStep 3.ModelStep 4.Fork or pulleyStep 5.HubYOUR COMPLETED PARTNUMBER IS :SPPRICE CODESSize Natural Aluminum Polished Black Size Natural Aluminum Polished Black16” X 4.00” 799512 799517 799518 18” X 9.00” 799514 799525 79952616” X 9.00” 799511 799516 799523 18” X 10.50” 799529 799527 79952817” X 6.50” 799512 799513 799520 21 X 2.75 799511 799522 79952418” X 4.00” 799515 799519 799521PRICE CODES ONLY CAN NOT BE USED TO ORDER!Note: Speed-point wheels are build to order. Allow a minimum of 6 weeks for building and shipping.Contact your Zodiac dealer for more information.11-023

EXCEL ALUMINUM AND CHROME ALUMINUM RIMSTrue high-quality aluminum rims are made by the world’slargest rim manufacturer from their own proprietary “6000Series T6” special aluminum to assure strength. Theserims have passed rigorous JIS (Japan Industry Standards)for strength and safety. Excel rims are available in a widevariety of sizes to allow the look you want to achieve andin your choice of high lustre polished or brilliant Chromeplated finish. These Excel rims come drilled in a pattern, socan be laced to both OEM and aftermarket 40-hole steel oraluminum hubs.Polished ChromeAluminum Aluminum Size, Width720300 720301 16” X 3.50”720302 720303 16” X 4.25”720304 720305 16” X 5.50”720306 720307 17” X 4.25”720308 720309 17” X 5.50”720310 720311 18” X 4.25”720312 720313 18” X 5.50”720314 720315 19” X 2.15”720316 720317 21” X 2.15”SPOKE KITS FOR EXCEL ALUMINUM AND CHROMEALUMINUM RIMSSpoke kits to lace Excel rims to OEM or aftermarket steel oraluminum hubs. Kits are available in Stainless Steel or witha Chrome plated finish. Will also work with Akront aluminumand Zodiac chrome steel rims with the same application.Spoke kits141109 15” steel hub Chrome141108 15” steel hub Stainless Steel234385 16” steel hub Chrome234386 16” steel hub Stainless Steel234387 17” steel hub Chrome234388 17” steel hub Stainless Steel141270 18” steel hub Chrome141271 18” steel hub Stainless Steel141115 19” steel hub Chrome141189 19” steel hub Stainless Steel141268 19” aluminum hub Chrome141269 19” aluminium hub Stainless Steel141116 21” steel hub Chrome141191 21” steel hub Stainless Steel141118 21” aluminum hub Chrome141192 21” aluminum hub Stainless Steel11-024

COMPLETE WHEEL ASSEMBLIES WITH ALUMINUMEXCEL RIMSWe have taken the light-weight Excel aluminum rims andlaced those to our top quality hubs using either Chromeplated or Stainless Steel spokes. This will give you theultimate custom wheel in all popular sizes and most widthfrom 2.15” to 5.5”. Each wheel has been hand-laced andtrued to guarantee a minimum run-out. Wheels are availablewith Chrome plated steel hub for front or rear applications,Chrome plated cast aluminum front hubs as well as a billetaluminum front hub version. All wheels are available witheither a show Chromed aluminum Excel rim as well as abeautiful polished aluminum Excel rim. Wheel bearingsare pre-set to factory specifications. This range of wheelscovers most models from 1970 to present and in variouswidths.Dual flange steel hub with 7/16” (11.1 mm) flangeholesPolished Chrome Size, Width Spokesrim rim720452 721252 16” x 3.50” rim, Chrome720453 721253 16” x 3.50” rim, Stainless Steel720454 721254 16” x 4.25” rim, Chrome720455 721255 16” x 4.25” rim, Stainless Steel720456 721256 16” x 5.50” rim, Chrome720457 721257 16” x 5.50” rim, Stainless Steel720458 721258 17” x 4.25” rim, Chrome720459 721259 17” x 4.25” rim, Stainless Steel720460 721260 17” x 5.50” rim, Chrome720461 721261 17” x 5.50” rim, Stainless Steel720462 721262 19” x 2.15” rim, Chrome720463 721263 19” x 2.15” rim, Stainless SteelDual flange steel front hub with 5/16” (8 mm) flangeholesPolished Chrome Size, Width Spokesrim rim720478 721278 16” x 3.50” rim, Chrome720479 721279 16” x 3.50” rim, Stainless Steel720480 721280 19” x 2.15” rim, Chrome720481 721281 19” x 2.15” rim, Stainless Steel720466 721266 21” x 2.15” rim, Chrome720467 721267 21” x 2.15” rim, Stainless SteelChrome plated aluminum front hub for use withsingle or dual disc all Narrow Glide front ends 1984to presentPolished Chrome Size, Width Spokesrim rim720470 721270 19” x 2.15” rim, Chrome720471 721271 19” x 2.15” rim, Stainless Steel720472 721272 21” x 2.15” rim, Chrome720473 721273 21” x 2.15” rim, Stainless SteelBillet aluminum front hub for use with single or dualdisc all Narrow Glide front ends 1977 thru 1983Polished Chrome Size, Width Spokesrim rim720474 721274 19” x 2.15” rim, ChromeN/A 721275 19” x 2.15” rim, Stainless SteelN/A 721276 21” x 2.15” rim, ChromeN/A 721277 21” x 2.15” rim, Stainless SteelBillet aluminum front hub for use with single or dualdisc all Narrow Glide front ends 1984 to presentPolished Chrome Size, Width Spokesrim rim720468 N/A 21” x 2.15” rim, ChromeN/A 721269 21” x 2.15” rim, Stainless Steel11-025

TÜV APPROVED AKRONT ALUMINUM WHEEL RIMS BYMORADMorad, one of Europe’s largest and most prestige rimmanufactures, have recently acquired the complete Akrontrim factory. After a series of improvements they have nowre-started the production of these high-quality aluminumrims. They have improved the quality wherever possibleand expanded the range of available sizes. These “Light-Weight” rims are made out of 6051-T6 aluminum, havea high-gloss polished finish and are factory inspected fortrueness and roundness. Spoke holes are drilled in a patternto lace these rims to OEM or aftermarket hubs. Lightweightaluminum rims reduce unsprung weight and rotatingmass for smoother rides, improved handling and quickeracceleration. Akront rims are available in a variety of widthsand diameters, making them the ultimate choice for theCustom Bike Builder. These very competitively priced rimsare TÜV and DOT approved.Part no. Size, Width235896 15” x 4.25”235897 15” x 5.00”234424 16” x 3.00”234375 16” x 3.50”234376 16” x 4.25”235898 16” x 5.00”234599 16” x 5.50”234377 17” x 4.25”234447 17” x 5.00”234374 17” x 5.50”234382 18” x 4.25”234531 18” x 5.00”234384 18” x 5.50”234380 19” x 2.15”234379 19” x 2.50”234381 21” x 2.15”SPOKE KITS FOR AKRONT ALUMINUM RIMSSpoke kits to lace Akront/Morad rims to OEM or aftermarketsteel or aluminum hubs. Kits are available in Stainless Steelor with a Chrome plated finish.Spoke kits141109 15” steel hub, Chrome141108 15” steel hub, Stainless Steel234385 16” steel hub, Chrome234386 16” steel hub, Stainless Steel234387 17” steel hub, Chrome234388 17” steel hub, Stainless Steel141270 18” steel hub, Chrome141271 18” steel hub, Stainless Steel141115 19” steel hub, Chrome141189 19” steel hub, Stainless Steel141268 19” aluminum hub, Chrome141269 19” aluminium hub Stainless Steel141116 21” steel hub, Chrome141191 21” steel hub, Stainless Steel141118 21” aluminum hub, Chrome141192 21” aluminum hub, Stainless Steel11-026

HAND LACED WHEEL ASSEMBLIES WITH ALUMINUMAKRONT BY MORAD RIMSWe have taken the light-weight and beautifully polishedAkront aluminum rims and laced them by hand to our topquality Chrome hubs with either Chrome or Stainless Steelspokes. This gives the ultimate custom wheel in all popularsizes and all widths from 2.15” thru 5.50”, with your choiceof steel, aluminum or billet aluminum hubs. Wheels are truedto guarantee minimal run out and wheel bearings are setto factory specifications. The range of wheels available willcover most models from 1970 thru 1999.Wheels with steel dual flange hubs and 7/16”(11.1 mm) flange holesChrome Stainless Size, Widthspokes spokes239670 239671 15” x 4.25” rim239672 239673 15” x 5.00” rim239674 239675 16” x 3.50” rim239676 239677 16” x 4.25” rim239678 239679 16” x 5.00” rim239080 239081 16” x 5.50” rim239680 239681 17” x 4.25” rim239082 239083 17” x 5.00” rim239682 239683 17” x 5.50” rim239114 239115 18” x 5.00” rim239149 239150 18” x 5.75” rim239684 239685 19” x 2.15” rimWheels with steel dual flange front hubs and 5/16”(8 mm) flange holesChrome Stainless Size, Widthspokes spokes239174 239175 16” x 3.00” rim239698 239699 16” x 3.50” rim239700 239701 19” x 2.15” rim239688 239689 19” x 2.50” rim239692 239693 21” x 2.15” rimWheels with Chrome plated aluminum hub, fit allNarrow Glide front ends 1984 to present, single ordual discChrome Stainless Size, Widthspokes spokes239702 239703 19” x 2.15” rim239704 239705 19” x 2.50” rim239706 239707 21” x 2.15” rim11-027

CHROME WHEEL RIMSZodiac has the finest quality rimsavailable. They are manufactured by afactory that has years of experiencewhich enables them to develop a highquality rim which can compete withany other manufacturer and outclassthem. Because of proper polishing andchroming, we can offer you a show-Chrome rim with a deep blue finish. Allrims are for inner tubes with a metalcenter valve.Custom Style Rims with Rolled Edge702100 Rim 1.85 x 19”40 holes702101 Rim 1.85 x 21”40 holes702102 Rim 2.15 x 21”40 holes NEWCHROME 19” FRONT RIM WITHROLLED EDGES233586 Zodiac has the finestquality rims available. This showchromereproduction of the 2.50 x19” drop center rim has rolled edgesand is updated with a conventionalspoke dimple pattern which allowsquick and easy lacing to disc hubs(OEM 43018-73).Drop Center Rims143002 Rim 3.00 x 15”40 holes702109 Rim 4.50 x 15”NEW 40 holes702104 Rim 3.00 x 16”40 holes702110 Rim 5.50 x 16”NEW 40 holes702111 Rim 6.00 x 16”NEW 40 holes702108 Rim 3.50 x 17”NEW 40 holes702107 Rim 3.50 x 16”NEW 40 holes702105 Rim 3.00 x 18”NEW 40 holes702103 Rim 2.50 x 19”40 holes702106 Rim 3.00 x 19”NEW 40 holes231622 Rim 2.15 x 21”40 holesBLACK POWDER COATED RIMSAnother exclusive from Zodiac. For thecustom bike builder that wants thatspecial “Cafe Racer” look, Zodiac offersglossy black powder coated rims in bothoriginal style drop center and a rollededge custom style. Rims are availablein all popular sizes.Drop center rims232696 Rim 3.00 x 15” 40 holes232697 Rim 3.00 x 16” 40 holes232709 Rim 2.50 x 19” 40 holes232700 Rim 2.15 x 21” 40 holesRolled edge rims232702 Rim 1.85 x 19” 40 holes232703 Rim 1.85 x 21” 40 holesCHROME 80 SPOKE 4.00 X 16” RIMZodiac rims are famous for theirquality and competitive pricing. Forthe custom builder we have added the80 spoke 4.00 x 16” drop center steelrim with a beautiful deep blue Chromefinish. Works with 140 thru 170wide tires.143016 4.00 x 16” 80 spokeChrome rim11-028

EUROPEAN MADE STAINLESSSTEEL RIMSThese beautifully polished StainlessSteel rims are made by skilledcraftsmen to highest standards andare by far the best available. The handpolishing is done by a special processto such high standards, they really looklike Chrome plated but, being stainless,will never rust. No matter what weatherconditions are, these stainless rims willnot be affected. Made from 2.5 mmthick, 18/8 non-magnetic StainlessSteel with a unique rounded dropcenter type well, which accepts stockand stock style, spokes. Available withthe spoke dimples in the center as wellas with offset spoke dimples in 40, 80,and 120 hole versions. Matching spokesets are available in Chrome as wellas Stainless Steel. These spoke setscontain 40 spokes and nipples, order 2sets for 80 hole rims or 3 sets for 120hole rims.Note: Check out our extra wide hubsfor use with these wide rims.Rims with center spoke dimplesSize 40 hole 80 hole 120 hole15” x 4.25” 701009 N/A 70101115” x 7.00” 701024 701025 70102616” x 3.50” 701033 701034 70103516” x 4.25” 701036 701037 70103816” x 7.00” 701047 701048 70104917” x 3.50” 701059 701060 70106117” x 4.25” 701062 701063 70106417” x 7.00” 701077 701078 70107918” x 2.15” 701000 701001 70100218” x 3.50” 701083 701084 70108518” x 4.25” 701086 701087 70108819” x 2.15” 701003 701004 70100521” x 2.15” 701006 701007 70100823” x 3.50” 701148 701149 701150Rims with off-center spoke dimplesSize 40 hole 80 hole 120 hole15” x 5.50” 701012 701013 70101415” x 6.00” 701015 701016 70101715” x 7.00” 701021 701022 70102315” x 8.00” 701027 701028 70102915” X 9.00” 701030 701031 70103216” x 5.00” 701116 701039 70104016” x 5.50” 701041 701042 70104316” x 6.00” 701117 701118 70111916” x 7.00” 701044 701045 70104616” x 8.00” 701050 701051 70105216” x 9.00” 701056 701057 70105817” x 5.50” 701065 701066 70106717” X 6.50” 701071 701072 70107317” X 7.00” 701074 701075 70107617” X 10.50” 701144 701145 70114618” X 5.50” 701089 701090 70109118” X 6.00” 701092 701093 70109418” x 6.50” N/A 701096 70109718” X 7.00” 701098 701099 70110018” X 8.00” 701101 701102 70110318” X 9.00” 701107 701108 70110918” X 10.50” 701141 701142 701143SPOKE KITS FROM ZODIACKits contain 40 spokes and nipples.Order 2 sets for 80 hole rims, or 3 setsfor 120 hole rims.Chrome Stainless steel141140 141188 15” steel hub141113 141184 16” steel hub141283 N/A 16” alu. disc hubN/A 701140 17” steel hub141170 141186 18” steel hub141114 141190 19” steel hub(may require longspoke nipplesZPN 141183)141115 141189 19” steel hub,custom rim141162 141195 19” alu. disc hub141116 141191 21” steel hub141118 141192 21” alu. disc hubN/A 701223 23” steel hub141183 Set of extra long spokenipples 1/2” extended(42 pcs)Note: These spokes are for usewith custom aluminum rims, if usedwith steel rims the spokes must beshortened by 3 mm.11-029

SPOKE KITS FROM ZODIACZodiac offers the wheel builder a complete selection of topquality spokes in both polished Stainless Steel and Chromeplated carbon-steel sets. Combining outstanding strengthwith light weight and flexibility, the selection of spokescovers virtually every application from replacing originalequipment to creating a complete new custom wheel. Weeven have spokes for those who want to convert their 19”or 21” Narrow Glide front end with aluminum disc hub intoa 16” wheel. Packaged and sold per kit (to lace one wheel).Note: Stainless steel spokes and nipples are made fromdifferent types stainless material to minimize their seizing toeach other, however, we strongly recommend the use of ananti-seize compound when assembling these spokes.Kits contain 40 spokes and nipples. Order 2 sets for80 hole rims, or 3 sets for 120 hole rimsChrome Stainless Steel141140 141188 15” steel hub141113 141184 16” steel hub141283 N/A 16” alu. disc hubN/A 701140 17” steel hub141170 141186 18” steel hub141114 141190 «19” steel hub (may require longspoke nipples ZPN 141183)141115 141189 19” steel hub, custom rim141162 141195 19” alu. disc hub141116 141191 21” steel hub141118 141192 21” alu. disc hubN/A 701223 23” steel hub141183 Set of extra long spoke nipples 1/2” extended(42 pcs)CUSTOM SPOKE SETSCustomize your spoke wheels with these custom spokesets. Available in both twisted and flat style, in your choiceof polished Stainless Steel or show-Chrome plated carbonsteel. These kits combine strength and beauty in its propersense. The wide variety enables you to customize stock andaftermarket spoke wheels.Flat spoke kitsChrome Stainless Steel141227 141238 16” stock rim, steel hub141229 141239 19” stock rim, steel hub141177 n/a 19” custom rim, steel hub141236 141242 19” stock rim, aluminum hub141231 141240 21” stock rim, steel hub141233 141241 21” stock rim, aluminum hubTwisted spoke kitsChrome Stainless Steel141260 141243 16” stock rim, steel hub141230 141245 19” stock rim, steel hub141175 141179 19” custom rim, steel hub141237 141247 19” stock rim, aluminum hub141262 141244 21” stock rim, steel hub141234 141246 21” stock rim, aluminum hubFor Arlen Ness Wheel Accessoriessee section 2611-030

assembly is complete with spacersand seals. Bearing load is pre-set.234022 3.00” x 16” with stainlesssteel spokes234023 3.00” x 16” with Chromespokes (OEM 40982-67)234026 2.15” x 21” with stainlesssteel spokesWHEEL ASSEMBLIES FOR 1936THRU 1966 BIG TWINSHigh quality, Chrome plated wheelassemblies comes complete laced andtrued, ready for installation. All internalhub parts and seals are included.Wheels are suitable for front or rearuse. Available with Chrome or polishedStainless Steel spokes.234030 3.00” x 16”, with stainlesssteel spokes234031 3.00” x 16”, with Chromespokes (OEM 40981-40)234032 2.50” x 19”, with stainlesssteel spokes234033 2.50” x 19”, with Chromespokes234034 2.15” x 21”, with stainlesssteel spokes234035 2.15” x 21” with ChromespokesNote: Requires the appropriate axleand hardware kit for the application.These axles will also work with originalequipment Star Hubs, but originalequipment axles will not work withZodiac’s Star Hub.REAR WHEEL ASSEMBLIES FORSPORTSTER MODELSA choice of 16” custom rear wheelsto fit all 1955 thru 1978 and 1986 topresent Sportster models. Availablewith Chrome or polished Stainless Steelspokes laced to Chrome hubs and rims.Each complete wheel includes spacersbearings and seals.234028 16” with Stainless Steelspokes 1955 thru 1978234029 16” with Chrome spokes1955 thru 1978237974 16” with Stainless Steelspokes, 1986 thru 1999237973 16” with Chrome spokes,1986 thru 1999WHEEL ASSEMBLIES FOR 1967-1972 BIG TWINSShow Chrome wheel assembliesfor the front or rear of all FL modelsfrom 1967 thru 1972 and the rear of1971 thru 1972 FX models. Thesestock replacement and custom wheelassemblies are available with Chromeor polished Stainless Steel spokes lacedto Chrome hubs and rims. Each wheelWHEEL ASSEMBLIES DUAL FLANGEThese wheels are available with Chromeor polished Stainless Steel spokes lacedto Chrome rims and hubs. The hubsfeature thicker spoke flanges and have5/16” or 7/16” holes on both sides. Allhubs accept any stock sprocket & rotoror rotor & rotor combination for greaterflexibility when building custom wheelcombinations. They include all internalspacers, seals and washers; bearingpre-load is set at the factory. The wheelassemblies will bolt on to most modelsfrom 1973 thru 1983.3.00” Wide wheels with 7/16”flange holes234001 16” with Stainless Steelspokes234002 16” with Chrome spokes(OEM 40908-81)Wheels with 5/16” flange holes234004 3.00” x 16” with stainlesssteel spokes234005 3.00” x 16” with Chromespokes234006 2.50” x 19” with stainlesssteel spokes234007 2.50” x 19” with Chromespokes234008 2.15” x 21” with stainlesssteel spokes234009 2.15” x 21” with Chromespokes (OEM 43664-80B)FRONT WHEEL ASSEMBLIES FOR1974 THRU 1977 SPORTSTER ANDFX MODELSA selection of stock replacement andcustom front wheels for 1974 thru1977 Sportster and FX models withsingle disc Narrow Glide front ends(except 1977 FXS and XLCR). Availablewith either Chrome or polished StainlessSteel spokes laced to a Chrome huband a 19” or 21” Chromed drop centerrim. Each wheel is complete with axlespacer, seals and bearings with theirpre-load set at the factory.234019 19” with Chrome spokes(OEM 43508-74)234020 21” with Stainless Steelspokes234021 21” with Chrome spokes11-031

WHEEL ASSEMBLIES WITHCHROME PLATED STEEL HUBS FOR1984 THRU 1999 MODELSThese wheels are available with Chrome orpolished Stainless Steel spokes laced toChrome rims and hubs. The hubs featurethicker spoke flanges. Rear wheel hubsaccept any combination stock sprocket anddisc rotor, front wheel hubs accepts anystyle single or dual disc rotor combinationfor greater flexibility when building customwheel combinations. They include all internalspacers, seals and washers. Bearing pre-loadis set at the factory to OEM specifications.The wheel assemblies will bolt on to mostmodels from 1984 thru 1999.Front wheel assemblies 1984 thru1999 FXST and FXSTC models237967 3.00” x 16” with Chromespokes237968 3.00” x 16” with stainless steelspokes237969 2.15” x 21” with Chromespokes237970 2.15” x 21” with stainless steelspokesFront wheel assemblies for FLH models1982 thru 1984237971 3.00” x 16” with Chromespokes237972 3.00” x 16” with stainless steelspokesFront wheel assemblies for FLST(H)(B)models237975 3.00” x 16” with Chromespokes237976 3.00” x 16” with stainless steelspokesRear wheel assemblies for FXWGmodels 1982 thru 1986237971 3.00” x 16” with Chromespokes237972 3.00” x 16” with stainlessspokesRear wheel assemblies for 1986 thru1999 models except 1987 thru 1999FLH, FLT models237973 3.00” x 16” with Chromespokes237974 3.00” x 16” with stainless steelspokes11-032FRONT WHEEL ASSEMBLIES 1977THRU 1999A selection of stock replacementand custom wheels with Chrome orpolished Stainless Steel spokes lacedto a Chrome hub and a 19” or 21”rim. Wheel assemblies are availablewith two different hubs, covering mostmodels from 1977 to present. All wheelassemblies are complete with axlespacer, seals and bearings which havehad their pre-load set at the factory.Fits all Sportster, FX and FXRmodels with dual disc Narrow Glidefront ends from 1977 thru 1983.234010 19” with Stainless Steelpokes234011 19” with Chrome spokes(OEM 43341-78)234012 21” with Stainless Steelspokes234013 21” with Chrome spokesFits all Sportster, Dyna Glide, FXand FXR models with single or dualdisc Narrow Glide front ends from1984 thru 1999234014 19” with Stainless Steelspokes234015 19” with Chrome spokes(OEM 43312-84)234016 21” with Stainless Steelspokes234017 21” with Chrome spokesWHEEL TRUING & BALANCINGSTANDA solid piece of equipment, made byRowe in the U.S.A. True on centers or“V” slot, balance on ball bearings. Thesame tool as used in all of the Harley-Davidson Schools.722516 Wheel truing stand onlyROWE SPOKE WRENCH721119 A small tool that is a mustfor every Wheel builder or workshop.Fits six most common spoke nipplesizes including all sizes used on Harley-Davidson wheels.BULLET VALVE STEM COVERSReplace those dull plastic tire valve stemcovers with these bullet style covers inall chrome, or gold/ chrome finish forthat finishing touch of your wheels. Soldeach.282008 Chrome tire valve stemcover282007 Gold/Chrome tire valve stemcover

CHROME TIREVALVE STEMCOVER282004 Designedin bullet shape, tofit the metal valvestems. Neat addition to any machine.CHROME TIRE VALVE STEMCHROME BILLET BULLET VALVESTEM CAPSChrome plated billet aluminum bulletcartridges to hide your tire valve stems.Sold in sets of 2.282009 Chrome billet bullet valvestem capsCHROME TIRESTEM COVER FORRUBBER VALVES282003 Chromeplated flared coverscrews over therubber stem of mostinner tubes.EAGLEHEAD TIREVALVESTEMCOVERDie-castvalve stemcovers for the perfect finishing touchto your wheels. Fit all tubes with steelvalves. Available in brightly Chrome orgold plated finish.282005 Chrome282006 GoldCAPSMade of aluminum, polished andbrightly colored to match and put thefinishing touch on your bike. Hex designis practical as well as attractive. Sold insets of 2.232572 Anodized valve caps red232573 Anodized valve caps blue232575 Valve caps Chrome232576 Anodized valve caps blackATIRE VALVE STEM CAPSTire valve stem caps available inRecessed-, Acorn-, Nugget-, and45-Caliber design. Most designs areavailable in various colors to matchyour bike’s color scheme. Made in theU.S. by Midwest Acorn. Sold in sets of4.A. Recessed Design723200 Chrome plated brassB. Acorn Nut Design723201 Chrome plated brass723202 Blue anodized aluminum723203 Gold anodized aluminum723204 Green anodized aluminum723205 Red anodized aluminumC. Nugget Design723206 Chrome plated brass723207 Blue anodized aluminum723208 Gold anodized aluminum723209 Green anodized aluminum723210 Red anodized aluminumD. 45-Caliber Design723211 Chrome plated brassBCNEWDNEWCUSTOM TIRE VALVE STEMCOVERS131171 These Chromeplated die-castvalve stem covers will be the perfectfinishing touch to your wheels. It’s thesmall detail that makes the difference.Features a rubber sealing gasket for atight air seal. The socket design insuresa super custom look. Fit any steel valvestem.COVERSThe finishing touch for you Skull-Maniacs.A tiny, classy item that will show youreye for details. Available with black orred painted eyes. Sold in pairs.011479 Red eyes011485 Black eyesRUBBER TIRE VALVE FORTUBELESS TIRESShort rubber tire valve for use in mostwheels for tubeless tire applications.Fits 11.5 mm (0.453”) diameter hole.Sold each.711860 Tubeless tire valve, rubberTUBELESS TIRE VALVESUnlike ordinary tubeless tire valves,usually find in most tire shops, thesevalves are available in clear anodizedaluminum, chrome or gold plated. Soldin sets of 2 for one motorcycle.322021 Clear anodized322020 Chrome plated322022 Gold plated11-033

A B C D E FVENOM AND VENOM R TIRESFeatures a unique sequential pattern and produces anexceptionally quiet ride. The advanced casing technologyused in this tire gives low rolling resistance, cooler runningand high mileage. Special sidewall treatment features snakehead logo and both narrow and wide whitewall. It has multiarctread contour for light, neutral turn in and corneringstability. The Venom R is the radial version of the Venom,designed for fitment on performance orientated custombikes. The AM20 Super Venom Front Tire features front tirepairing with all Venom type tires as well as AM20 and AM18rear tires. AM18 Super Venom Rear Tire features excellentgrip delivered by a combination of scientifically stressedcasing with advanced tread compound and an extra softcompound. This tire is Race-bred and has a contour thatensures a large footprint at all angles. Widely used on theDrag-Strip and track.Venom front tiresPart Tread Wall SizeNumber Type236185 A NWW MT/90HB x 16 Tubeless236184 A WWW MT/90HB x 16 Tubeless236186 A - MT/90HB x 16 Tubeless237602 A - 130/70HB x 18 Tubeless236188 A - 100/90H x 19 Tubeless236187 A WWW 100/90H x 19 Tubeless236190 A - MH90-H x 21 Tubeless236189 A WWW MH90-H x 21 Tubeless237828 A - 120/70H x 21 TubelessVenom rear tiresPart Tread Wall SizeNumber Type236180 B - 140/90H x 15 Tubeless236226 B - 150/90HB x 15 Tubeless236223 B - 170/80H x 15 Tubeless236239 B rear 200/70 x 15 Tubeless236183 B - MT/90HB x 16 Tubeless236182 B NWW MT/90HB x 16 Tubeless236181 B WWW MT/90HB x 16 Tubeless236179 B - 140/90HB x 16 Tubeless236178 B WWW 140/90HB x 16 Tubeless236238 B - 150/80H x 16 Tubeless236240 B - 150/80H x 16 Tubeless236241 B WWW 150/80H x 16 Tubeless236224 B - 160/80HB x 16 TubelessNWW = Narrow White Wall WWW = Wide White WallVENOM R radial tiresPart Tread Wall SizeNumber Type236222 A - front 150/80HR x 17 Tubeless293511 B - rear 300/40HR x 17 Tubeless236221 B - rear 180/70HR x 16 Tubeless236242 B - rear 180/55R x 18 Tubeless237827 B - rear 180/55ZR x 18 Tubeless237826 B - rear 200/55ZR x 18 Tubeless293512 B - rear 300/35HR x 18 Tubeless293513 A WWW front 110/90 x 19 Tubeless237829 A - front 120/70ZR x 19 TubelessROADRUNNER AM20 FRONT AND AM21 REAR TIRESAvon’s Roadrunner tires have excellent braking performancein all conditions with their unique thread pattern providingextra drainage in wet weather. Strong pre-stressed casingensures ride comfort and stability. The special contourpromotes progressive lean-in to corners. The AM20 fronttire can be paired with rear tires AM21 and AM23. Can alsobe used the in combination with the Super Venom AM18.Roadrunner AM20 front tiresPart Tread SizeNumber Type237599 D 130/90H x 16 Tubeless237601 D 90/90H x 19 Tubeless237605 D 90/90H x 21 TubelessRoadrunner AM21 rear tiresPart Tread SizeNumber Type237506 E MT90 x 16 Tubeless237609 E 130/90H x 17 Tubeless237651 F 230/60H x 15 TubelessRoadrunner universal tires (can be used front andrear)Part Tread SizeNumber Type237611 G MT/90H x 16 Tube TypeRoad Ranger rear tirePart Tread SizeNumber Type Rear237613 E 140/90HB x 16 Tubeless11-034

G H I J K LAM23 TRACK FORMULA TIRESAvon’s track formula tires provide excellent grip byscientifically stressed casing and advanced tread compound.The race bread contour ensures a large foot print at allangles. Has Kevlar Bias belt construction.Track formula tiresPart Tread Front SizeNumber Type Rear237617 C Rear 160/80VB x 16 Tubeless237635 C Rear 180/60VB x 16 Tubeless237616 C Rear 180/55VB x 18 Tubeless237646 C Rear 200/55VB x 18 TubelessAVON SPEEDMASTER TIRESA classic tire for classic motorcycles. The Avon Speedmasterprovides positive steering, good lateral stability and goodtire to road adhesion even under wet road conditions. Therib profile of the front tire does not only provide a nostalgiclook, it also provides a smooth ride, save handling andpositive qualities. Speedmasters work best if used front andrear. The tires are S rated for speeds up to 180 KMH (118MPH) and must be used with inner tubes.Speedmaster MK II tiresPart Tread Front SizeNumber Type Rear237623 H Rear 5.00 x 16 Tube Type237624 I Front 3.00 x 21 Tube TypeAVON AZARO VDB RADIAL TIRESAzaro tires are designed for the rider that takes his bikejust a bit further and wants perfect handling in fastercorners. The new constructed Sport II front tire gives fastersteering response and offers high speed stability. TheAzaro tire leaves a bigger footprint at higher lean angles,delivers improved grip and the cooler running, more durablecompound, maintains optimum performance temperaturefor maximum grip.Azaro front tiresPart Tread Type SizeNumber237835 K AV45 120/70ZR x 17 TubelessAzaro rear tiresPart Tread Type SizeNumber237836 L AV46 170/60ZR x 17 TubelessNEWAVON VIPER PERFORMANCE TIRESThese high performance tires are designed for daily riders.They offer the right balance between strong grip, optimizedhandling characteristics and long life. The special durablecompound retains a good grip under both wet- and dryweather conditions. The carcass design provides a largefootprint, even at extreme lean angles. Furthermore thesetires are extremely stable at high speed, braking andaccelerating fast.Viper front tiresPart Number Tread Type Size237859 M 120/70ZR x 17 TubelessViper rear tiresPart Number Tread Type Size293517 M 170/60ZR x 17 Tubeless237860 M 190/50ZR x 17 TubelessAVON “GANGSTER” WHITE WALLTIREThe Avon Gangster White Wall MT 90H16 tubeless is designed specially forHarley-Davidson and classic machines.The introduction of a two-piece tread,with a standard compound used inthe crown, gives the Gangster wetweather performance equal to thatof conventional black wall tires. TheGangster is H-rated for speeds up to130 MPH (210 KM/H), and will provide you with an attractivelooking machine. Gangster tires are designed for use onboth the front or rear wheel.237612 MT/90 H 16 Gangster White Wall tubeless tireM11-035

ABCMETZELER ME 880 MARATHON TIRESMetzeler manufactures tires since the invention of themotorcycle. The motorcycle and Metzeler have writtenhistory together for over a century now. Metzeler invented thetubeless tire, as well as the steel belted radial. The MetzelerME 880 is a tread pattern that is well known for high mileagein conjunction with long lasting excellent steering capacities,reason why they are called Marathon. Some of these Metzelertires are also available as steel belted radials, or with theirown MBS Metzeler Belt System) design. Metzeler presentsthe new 280/35 R 18 ME 880 “XXL”, a real milestone inmotorcycle tires. The new Metzeler 280 is specially designedfor choppers and custom bikes, this impressive tire ridessmoothly and comfortably despite its enormous width. TheME 880 offers exceptional riding stability at high speeds andlooks great on today’s tuned bikes. The new 280 XXL offersperformance to make even the wildest biker dreams cometrue. Despite its extra-wide 28 cm profile, this tire deliversexcellent road performance. This design provides excellentshock absorption and outstanding resistance to centrifugalforce for added dimensional stability. The computer designedtread pattern with staggered centerline grooves combinedwith high silica compound offers great grip both in wet anddry conditions, smooth rolling characteristics and highlyeffective transfer of braking force. The tire’s dimensionalstability is more than an important safety factor – it alsocontributes to bike styling. With the new 280 XXL, custombike builders can mount the rear fender extremely close tothe tire without having to worry about contact due to tiredeformation under centrifugal forces. The Metzeler ME 880Marathon 280/35 R 18 M/C 84V TL can be fitted on rimsfrom 9.50 to 10.50 inches. It is one of the widest rear tiresavailable today, but we also have these fine German tires inmore common sizes.16” rear737005 Rear, MBS 130/90Bx16-73H, Tubeless (B)737009 Rear, MBS 150/80Bx16-71H, Tubeless (B)737011 Rear steel radial, 240/50R16-84V, Tubeless (C)17” rear737021 Rear, 160/70B17-79V, Tubeless (B) NEW18” rear737023 Rear radial, 180/55ZR18-74W, Tubeless (C) NEW737016 Rear steel radial, 240/40R18-79V, Tubeless (C)737019 Rear radial, 280/35R18-84V, Tubeless (C)16” front737004 Front, 130/90x16-67H, Tubeless (A)11-03617” front737008 Front, 120/70R17-58V, Tubeless (A)737010 Front, 120/80x17-61V, Tubeless (A)737012 Front, 130/70R17-72V, Tubeless (A)18” front737013 Front, 100/90x18-56H, Tubeless (A)737020 Front, 130/60VRx18-60V, Tubeless (B)737006 Front, 130/70R18-63H, Tubeless (A)19” front737017 Front, 100/90x19-57H, Tubeless (A)737022 Front, 120/70ZR19-60W, Tubeless (A)21” front737018 Front, 80/90x21-48H, Tubeless (A)NEWNEWNEWNEWNEWAVON AM23230/60VB15 ‘BIGFOOT” REAR TIRELooking for a real pieceof rubber for your “Fat-Ass” motorcycle. Here itis, Avon’s 230/60VB15monster tire, the fattestwidest tire ever designedfor use on a motorcycle.It has been developedwith the demands of today’s Custom Bike Builder in mind.Designed for use on 6.00” to 8.00” x 15” wheels, V-ratedfor maximum speed up to 175 MPH (280 KM/H) and carriesa “B” load range. Mounted on a 8” rim this bias-belted blackbeauty measures almost 10 3/8” (26 cm) wide.237651 Avon AM23 230/60VB15 “BigFoot”

AVON’S BIG BAD FAT ASS REARTIRESAvon Tires and Zodiac have a reputationwhere it comes to extreme wide reartires. First there was Avon’s “Big” 200tire, than there was Avon’s “Bigger” 230tire, than came the even “Bigger” 250tire. With the introduction of Avon’s 300tire most people thought that it wouldn’tget any wider. Well, you are wrong. Nowthere is Avon’s latest, lowest, widest andmeanest Super Big Bad Fat Ass rear tire:the 330. The Avon 330 is an incrediblelooking motorcycle rear tire that leavesan even more incredible size footprint.Can you imagine a 33 centimeters (12”)wide tire on a motorcycle? This massiverear tire is wider than two stock Harleyrear tires PLUS a front tire all together.All Fat Ass rear tires are of radial constructionwith Aramid belts for addedstability. The radial construction alsomeans it can be paired with a radial, biasbelted or crossply front tire. The 300and 330 have special ‘rim protectors’to help prevent damage to wheels frompotholes. Usually only seen on top of therange car tires, the Avon rim protectionsystem will be seen as a welcomefeature for riders investing in expensivecustom wheels. For rim fitment checkthe recommended rim fitment schedulein this section.237757 250/40 HR-18293511 300/40 HR-17293512 300/35 HR-18293514 330/30 VR-17APPLICABLE AVON TYRES / RIM WIDTHRim Width WM2 WM3MT 1.85 MT 2.15 MT 2.50 MT 2.75 MT 3.00 MT 3.50 MT 3.75 MT 4.00 MT 4.50Tyre size MH90x21 MH90x21 MT90x16 MT90x163.00x21 3.00x215.00x16 5.00x1690/90x19 90/90x19 90/90x19100/90x19 100/90x19 100/90x1990/90x21 90/90x21 90/90x21100/90x21 100/90x21120/70x21110/80x18 110/80x18 110/80x18 110/80x18120/70x17 120/70x17 120/70x17130/90x15 130/90x15 130/90x15 130/90x15130/90x16 130/90x16 130/90x16 130/90x16140/80x16 140/80x16 140/80x16 140/80x16 140/80x16140/90x16 140/90x16 140/90x16 140/90x16 140/90x16150/80x16160/80x16170/80x15 170/60x17Rim WidthMT 5.00 MT 5.50 MT 6.00 MT 6.25 MT 8.00 MT 9.00 MT 10.50 MT 12.50Tyre size 170/60x17 170/60x17180/55x18 180/55x18190/50x17 190/50x17200/60x16 200/60x16 200/60x16200/55x18 200/55x18230/60x15250/40x18 250/40x18300/40x17300/35x18330/30x17 330/30x1711-037

NEWAVON STORM-STThe Storm-ST replaces Avon’sAzaro-ST. The Storm-ST producesa footprint that changes size andshape depending on the bike’s leanangle, growing in size the furtherover the bike goes. It means youget high grip through the cornersyet in a straight line have a footprintwhich increases the Storm-STslifespan. Avon’s RF Technologyis a quantum leap in technologyfrom the dual compound tread,and will provide unparalleled evenness in wear patterns. Thewet weather performance of the Storm-ST is outstanding,thanks in part to the tire’s Super-Rich Silica (SRS) compound.The extremely high silica content delivers optimum grip inboth the wet and the dry. It also has the added benefit ofwarming up quickly. The Enhanced Aqua Flow (EAF) patternof the rear tire also increases your safety and confidence inwet conditions. With all this and together with many otherunique-to-Avon technologies it is no wonder the Storm-SThas gained numerous approvals from the tough Germantesting organization, the TUV.293519 160/70R17 - 79V rear tire, Tubeless“MONSTER”SERIES TIRESThe real Monstersizes for MonsterCustom Bikes. VeeRubber’s front tireis an incredible120/70R23-61H,but their rear tireis the Biggerthan-Bigtire thatmeasures 360/30R18-92H. Vee Rubber International isnew name on the Custom Bike market. It earned its honorsin the offroad, Quad and ATV markets. Some time agothey contracted Leo Smith, to develop the widest tire formotorcycles (Leo already developed a 200, 230, 250 and300 tire). The result is the Vee Rubber Monster tires. TheseMonsters are radials, tubeless, and H-rated for use up to130 MPH (210 km/h). The front tire is designed to be fittedon a 3.50” to 3.75” X 23” diameter rim, for the rear VeeRubber suggest the use of a 12.50” to 13.50” X 17” rim.741960 The Monster 360/30-R18M/C 92H rear tire741961 The Monster 120/70-R23M/C 61H front tireNEWNAVON COBRA TIRESCobra tires are aimed at the power cruiser and custommarkets. The successful Viper range technology has beenadapted and applied to the Cobra range for incredible stabilityand longevity. They feature a special construction to dealwith heavy loads. Perfect for touring, cruiser and custommotorcycles. ‘Snakeskin-effect’ sidewall and aggressivemulti-compound tread pattern for low noise emissions. Alsoavailable in extra wide sizes and extra large diameters forcustom applications, featuring the snake’s head logo on thesidewalls.Cobra AV71 front tiresPart Tread SizeNumber Type293522 N 150/80R16 71V Tubeless293523 N 150/80R17 72H Tubeless293524 N 130/70R18 63H Tubeless293525 N 120/70ZR19 60W Tubeless293527 N 120/70-21 62V Tubeless293526 N 130/60R23 65V TubelessCobra AV72 rear tiresPart Tread SizeNumber Type293520 O 200/60R16 79V Tubeless293518 O 200/55R17 78V Tubeless293530 O 180/55ZR18 74W Tubeless293531 O 200/55ZR18 79V Tubeless293521 O 250/40HR18 72V Tubeless293532 O 300/35R18 87V Tubeless293535 O 220/50R20 83V Tubeless293533 O 280/40R20 89V Tubeless293526 N 130/60R23 65V TubelessO11-038

AVON VENOMCUSTOM TIRESAvon is thebiggest name inthe industry whenit comes to tiresfor custom bikes.They were the firstto introduce a 200wide rear tire, andthe same for 230,250, 300 and 330 wide rear tires. Sometimes we heardpeople say “this must be the limit, it can’t get any wider”.Well, this might be, but before trying to go wider Avon hasnow introduced bigger tires to go on uncommon diameterrims. Specifically designed for Custom Bikes they now havea 130/60R23 front tire that is to be fitted on a 3.50” to4.00” wide 23” diameter rim, as well as a 280/40R20 reartire that is to be fitted on a 10” to 11” side to side and 20”diameter rim.293515 Avon Venom AM41 130/60R23 front tire293516 Avon Venom AM42 280/40R20 rear tireWHEEL & PULLEY BEARINGSStock replacement sealed ballbearing. Available for Sportsterand Big-Twin models 2000 topresent front and rear, and V-Rodmodels 2002 to present front andrear. Sold each.732900 Wheel bearing for 3/4” (19.05 mm) axles onSportster 2000 thru 2007 front and 2000 thru2004 rear, Softail 2000 thru 2006 front andrear, Softail Springer 2000 thru 2007 fron andrear, Dyna 2000 thru 2003 front and rear, andFLH/FLT 2000 thru 2001 rear (OEM 9267)732901 Wheel bearing for 1” (25.4 mm) axles onSportster 2005 thru 2007 rear, FLH/FLT 2000thru 2007 front and 2002 thru 2007 front andrear, V-Rod 2002 thru 2007 front and rear, Dyna2004 thru 2007 front and rear (OEM 9247)234574 Wheel bearing for 25 mm (0.984”) axles onNEW Softail 2007 to present front and rear (exceptfront on 2007 FLSTC Springer), Dyna 2008to present, FLH & FLT series models 2008 topresent front & rear, V-Rod 2008 to present front& rear. Does not fit on the sensor side of thewheel on ABS equipped models (OEM 9276)732902 Wheel bearing for the ABS sensor side onNEW 25 mm (0.984”) axles on 2008 to present FLHand LFT series models and 2008 to presentV-Rod (OEM 9252)732903 Pulley bearing, fits 2008 to present FLH and FLTNEW series models (OEM 9285)732904 Pulley bearing, fits 2008 to present V-RodNEW models (OEM 9254)WHEEL SEALSAvailable for most modelsfrom 1955 thru 1999.Zodiac wheel seals are soldeach, James wheel sealsare sold in 2-packs, Accelwheels are sold in dealer5-packs.Zodiac Accel James NEW022351 638293 N/A Fits FL steel hub 1967-1972, Sportster andK models with wire wheels1955-1978 andFX 1971-1972(OEM 41210-55)022353 N/A 742475 Fits all models with steelhub front and rear1973-1983, FL castwheels front and rear1980-1984 and FLT/FLHTcast wheel front and rearbrake side only,1982-1984(OEM 47519-58)022340 N/A 742476 Fits FX/FXR/XL modelswith cast or wire frontwheels 1973-1983 (notFXWG), FL cast wheelsfront or rear 1973-1979and FLT/FLHT cast wheelssprocket side 1980-1983(OEM 47519-72)022401 N/A 742477 Fits most models frontand rear with cast or wirewheels 1984 thru 1999(OEM 47519-83A)11-039

CRUZ TOOLS TIRE PRO TIREGAUGEIf you ever looked inside the toolboxof a mechanic, you would mostprobably find a tool like this precisiontire pressure gauge. Not only does itprovide quick and accurate readings,but also a valve holds the reading andallows bleeding of air until the desiredpressure is reached. A 12” long flexiblehose with a 40-degree brass chuckpermits access to difficult places andevery valve stem. The large 2” dial isvery easy to read and is accurate overa 0 - 60-psi range.740306 Cruz tools tire pro tiregauge.TIRE PRESSURE GAUGE WITH PEAKHOLDTired of trying to read your exacttire pressure while the needle startsbouncing up and down, or even dropsback to zero as soon as you move yourgauge? No longer, this pressure gaugewill hold the highest measured pressureuntil you release the needle.This racingquality instrument is more accuratethan most others It features a 60 psi(4 atm) with 0,10 psi increments scalefor exact pressure reading. Used by allserious racing teams.239575 Tire pressure gauge withpeak holdHEAVY-DUTY INNER TUBESFinest quality butyl tubes, hold air muchlonger than natural rubber as butyl isnon-porous. Stock type 16” inner tubesare available with moulded rubber offsetvalve, steel off-set valve as wellas steel center valve as used on laterHarleys.15” Inner tubes320085 230/60 X 15” with steelcenter valve16” Inner tubes320077 4.00”/4.50” X 16” with steelenter valve320007 5.00”/5.10” X 16” withrubber offset valve320065 5.00”/5.10” X 16” with steeloffset valve320072 5.00”/5.10” X 16” with steelcenter valve320076 5.75”/6.00” X 16” with steelcenter valve320079 200/60 X 16” with steelcenter valve18” Inner tubes320066 3.50/4.00 X 18” with steelcenter valve320067 4.00”/4.50” X 18” with steelcenter valve320078 5.00” X 18” with steel centervalve320080 180/55 X 18” with steelcenter valve237833 240 thru 260 x18 tires19” Inner tubes320068 2.75”/3.00” X 19” with steelcenter valve320070 3.00”/3.25” X 19” withrubber center valve21” Inner tubes320069 2.75”/3.00” X 21” with steelcenter valve320071 3.25”/3.50” X 21” with steelcenter valveRIM STRIPSRubber rim strips for 16”, 18”, 19”and 21” rims. Strips are 1 1/5” (3 cm)wide.322004 Rim strip 16” side valve322005 Rim strip 16” center valve322000 Rim strip 18” center valve322001 Rim strip 19” center valve322002 Rim strip 19” side valve322003 Rim strip 21” center valveCHROME WHEEL SOCKET SCREWS339009 Chromed high grade socketscrews. Fits all models 1935 thru 1972with interchangeable hubs. Pack of 5(OEM 43530-35A).HUBS FOR OLD STYLE INTER-CHANGE-ABLE WHEELSPerfect reproduction of the blacksteel hub assembly. Fit all Big Twinfront or rear wheels with drum brakesand 45” 1936 thru 1972 models withinter change able wheels. Hubs comecomplete with all internal componentsinstalled.720090 Hub complete(OEM 3958-36 & 43540-36)11-040

REAR HUB ASSEMBLY FOR 1979THRU 1982 SPORTSTER147056 Chrome plated rear wheelhub assembly that will fit all Sportstermodels from 1979 thru 1982. The hubassembly comes with all the internalcomponents installed and pre-setbearings (OEM 43457-79).STAR HUB WITH TIMKEN STYLEBEARINGSThis Chrome plated hub is engineeredfrom the ground up to duplicatethe original parts dimensions andappearance, but with the addedreliability of Timken-style bearings andconventional oil seals. Don’t confuse thisquality part with other manufacturersreplacement hubs or those questionablehub conversions you read about. Noexpense is spared in the design of thisnew part to give you the finest Star Hubmoney can buy. Features include extrathickspoke flanges, beautiful Chromeplating, adjustable bearing pre-load andTimken-style bearings. All hubs comecomplete with bearing pre-load set atthe factory.Note: Requires the appropriate axle andhardware kit for the application. Theseaxles will also work with original equipmentStar Hubs, but original equipmentaxles will not work with Zodiac’s StarHub.148096 Complete late-style hubassembly148097 Bearing spacer 2.410orange. Sold each148100 Bearing spacer 2.424yellow. Sold each148101 Bearing spacer 2.438 white.Sold each210208 Bearing and race(two complete sets)022435 Oil seal (pair), late style(1 3/4” outer diameter)148098 Axle spacer Chrome(sold each)148099 Retaining ring (pair)148071 Outer cover148076 Hub cover screw/lockwasher kit (5)Chrome Axle with hardware339055 Front 1936 thru 1948339056 Front 1949 thru 1966339064 Rear 1936 thru 1957339065 Rear 1958 thru 1966WHEEL HUB ASSEMBLY 1967 THRU1972 BIG TWIN148008 Show-Chromed wheel hubassembly. Fits all Big Twins, frontand rear 1967 thru 1972. Containsthe Chrome hub and all of its internalcomponents (OEM 43540-67A).SHOW-CHROMED DUAL FLANGEWHEEL HUBBeautifully Chrome plated wheel hubassembly. Contains the hub with allinternal components. Stock replacementfor FL and FXWG front and rear1973 thru 1983 and FX rear 1973 thru1983. Flanges have 7/16” (11.10 mm)bolt holes. Internal components areseparately available.147060 Complete hub assembly(OEM 43540-73A)147005 Bearing spacer 4.420”orange (OEM 43601-78)147007 Bearing spacer 4.434”yellow (OEM 43602-78)147008 Bearing spacer 4.448” white(OEM 43603-78)147002 Outer spacers, pair(OEM 41196-73)147003 Hub washers, pair(OEM 43559-73)147004 Hub retainer ring, 10 packOEM 11027)231440 Wheel bearing and cone(OEM 9052)REAR HUB ASSEMBLY FORSPORTSTER MODELS147026 Complete Chrome hubassembly to fit all Sportster models1955 thru 1978 rear. Includes all internalcomponents (OEM 41017-66A).REAR HUB ASSEMBLY FOR FLTMODELSShow Chromed rear wheel hubassembly to fit 1987 thru 1999 FLTmodels. All internal components areincluded and bearings are set to factoryspecifications.147082 Complete hub assembly(OEM 41020-86)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing, cup and cone(OEM 9052)11-041

FRONT HUB ASSEMBLY FOR WIDE-GLIDE FRONT FORKSComplete Chrome plated front hubassembly for most models with Wide-Glide front ends. Hub assembly includesall internal components and bearing preloadis set at the factory. Hub has 5/16”(8 mm) holes in both flanges. Internalcomponents are separately available.147022 Complete hub assembly(OEM 43663-80A)147005 Bearing spacer 4.420”orange (OEM 43601-78)147007 Bearing spacer 4.434”yellow (OEM 43602-78)147008 Bearing spacer 4.448” white(OEM 43603-78)147002 Outer spacers, pair(OEM 41196-73)147003 Hub Washers, pair(OEM 43559-73)147004 Hub retainer ring, 10 pack(OEM 11027)231440 Wheel bearing and cone(OEM 9052)FRONT HUB ASSEMBLY FORSOFTAIL MODELSChrome plated front wheel hubassembly. Fits all FXST(C) models from1984 thru 1999. Contains all internalcomponents. Bearings are properlyspaced at the factory.147057 Hub complete(OEM 43672-84)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing and cone(OEM 9052)Front & rear hub assembly forFLH, FXWG and FXE modelsFits FLH models front 1982 to 1984,FXWG 1982 thru 1986 rear and FXE1980 rear. Bearings are set to factoryspecifications.147058 Hub complete(OEM 40952-82A)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing and con(OEM 9052)Front hub assembly for HeritageSoftail modelsFits all FLST Heritage Softail models1986 thru 1999.147063 Hub complete(OEM 43053-86)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing and cone(OEM 9052)REAR HUB ASSEMBLY FOR XL, FXRAND SOFTAIL MODELSStock replacement for FXR models1986 thru 1994, XL models from 1986thru 1999 and Softail models FXST(C)/FLST(F) 1986 thru 1999.147059 Hub complete(OEM 40976-86)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing and cone(OEM 9052)FRONT HUB ASSEMBLYShow Chromed front hub assembly forall FLT models from 1987 thru 1999.All internal components are installedand bearings are set to the factoryspecifications.147081 Hub assembly(OEM 43404-87)022401 Wheel seal(OEM 47519-83A)231440 Wheel bearing, cup and cone(OEM 9052)11-042

NEWCHROME CUSTOM STYLE WHEELHUBS FOR 2000 TO PRESENTMODELSThese chrome plated steel wheel hubsare a direct replacement for the 2000and later style hubs with sealed wheelbearings and 2000 to present style 2.22”inner diameter disc brake rotors. Hubsare also great for customizing or whenbuilding your own Custom motorcycle.Because roller bearings need no preload,hubs are supplied without wheelbearings. Order ZPN 723900 bearingsfor hubs that use a 3/4” (19.05 mm)axle, ZPN 732901 for hubs that use a1” (25.4 mm) axle, or ZPN 234754 forhubs that use a 25 mm (0.984”) axle.147151 Single flange hub, fits fronton 2000 to present Softailmodels and 2000 thru, allsingle flange Wide Glideapplications. Can also beused as a single flange rearhub. Has 5/16” flange holes.147152 Dual flange hub, fits fronton 2000 to present FLHand FLT series models andall dual flange Wide Glideapplications, has 5/16”flange holes.147153 Dual flange hub, fits rear on2000 to present Sportster,Softail and Dyna models, aswell as 2000 thru 2001 FLHand FLT series models. Has5/16” flange holes on brakeside and 7/16” flange holeson pulley side.147154 Dual flange hub, fits rearon 2002 to present FLHand FLT series models, has7/16” flange holes.CHROME FRONT HUB ASSEMBLY1974 THRU 1977 SPORTSTERComplete hub assembly including theChrome plated hub and all its internalcomponents. Bearings are properlyspaced at the factory. Fits Sportsterand FX models (except 1977 FXS andXLCR) with single disc and Narrowglidefront ends.145024 Complete hub assembly(OEM 43600-74)231440 Wheel bearing and cone(OEM 9052)NEWCHROME WHEEL HUBS FOR 2000TO PRESENT SPORTSTER & DYNAA direct replacement for the 2000and later style hubs with sealed wheelbearings and 2000 to present style2.22” inner diameter disc brakerotors. Hubs are supplied withoutwheel bearings but can be used withtwo pieces ZPN 723900 bearings forhubs that use a 3/4” (19.05 mm) axle,two pieces ZPN 732901 for hubs thatuse a 1” (25.4 mm) axle or two piecesZPN 234754 for hubs that use a 25mm (0.984”) axle.147150 Narrow Glide hub, fits fronton both single and dual discSportster 2000 to presentand 2000 thru 2003 Dyna(OEM 43610-00)FRONT WHEEL HUB ASSEMBLYChrome plated wheel hub assembly forall Sportster, FX and FXR models 1977thru 1990 with dual or single disc andNarrow-glide front ends. Wheel hubassemblies include all internal componentsand bearings load is pre-set atthe factory. Internal components areseparately available.Fits Sportster FX and FXR modelswith dual disc and Narrowglidefront end 1977 thru 1983.147012 Complete hub assembly(OEM 43600-78)147013 Left bearing spacer(OEM 43488-77)147014 Bearing spacer 2.564” violet(OEM 43623-78)147015 Bearing spacer 2.550” pink(OEM 43624-78)147016 Bearing spacer 2.536” gold(OEM 43625-78)231440 Wheel bearing and cone(OEM 9052)Fits all Sportster, FX and FXRmodels (except FXLR) with singleor dual disc and Narrowglide frontends 1984 thru 1999147028 Complete hub assembly(OEM 43619-84)147014 Bearing spacer 2.564” violet(OEM 43623-78)147015 Bearing spacer 2.550” pink(OEM 43624-78)147016 Bearing spacer 2.536” gold(OEM 43625-78)231440 Wheel bearing and cone(OEM 9052)11-043

SHOW CHROMED DUAL FLANGEOFF-SET REAR WHEEL HUBSEverybody can sell you wide rims butnobody offers wide hubs as well. Nolonger! we now offer beautifully showChromed hubs in three different off-setsto fit up to 9.00” wide rims. Now youcan lace the hub again were it shouldbe, in the center of the rim. These hubswork with wide rims from 5.00” thru to9.00” wide. All three off-set hubs areavailable with either 40 and 80 spokeholes. The off-set is on the chain/pulleyside only. Can be used in many customapplications in combination with centerspoke rims.147087 Hub 7/8” offset, 40 spoke147090 Hub 7/8” offset, 80 spoke147091 Hub 1 3/8” offset, 40 spoke147092 Hub 1 3/8” offset, 80 spoke147093 Hub 2 1/4” offset, 40 spoke147094 Hub 2 1/4” offset, 80 spokeSTEEL CHROME HUB ASSEMBLYWITH 80 SPOKE HOLESCustom style steel hub assembly foruse with 80 spoke rims. Fits mostmodels with Wide-Glide Style frontforks or other wide front-ends. Canalso be used as a rear hub in mostcustom applications. Hub assemblyincludes all internal components andbearing pre-load is set at the factory.Hub has 5/16” (8 mm) holes in bothflanges and 2” diameter spigots to take1984 thru 1999 style disc brake rotorsand pulleys. Internal components areseparately available.147088 Complete 80 spoke hubassembly147005 Bearing spacer 4.420”orange (OEM 43601-78)147007 Bearing spacer 4.434”yellow (OEM 43602-78)147008 Bearing spacer 4.448” white(OEM 43603-78)147002 Outer spacers, pair(OEM 41196-73)147003 Hub washers, pair(OEM 43559-73)147004 Hub retainer ring, 10 pack(OEM 11027)231440 Wheel bearing and cone(OEM 9052)MINI HUB CAP FOR ALUMINUMHUBS147068 Beautiful Chrome plated minihub cap with an outside diameter of2 5/16” (59 mm). Fits OEM and Zodiacaluminum front hubs (ZPN 147012 and147028) FX and Sportster models from1973 thru 1984. Covers the bearingpart of the hub. Mounts between thefront wheel bearing spacer and thefront axle.CUSTOM FRONT HUBCAPSThese Chrome plated custom hub capwith counter bored Chrome sockethead screws are the hottest items fromZodiac. The front hub cap featuresdie-cast zinc construction and has sixfake screws and two functional onesthat attach it to the spoke flange. Thehubcap is made from high-strengthdie-cast aluminum and includes allof the Chrome hardware necessaryfor installation on all cast or spokedwheels.147049 Front hub cap for all FXWGand Softail models exceptFat Boy) from 1984 thru199211-044

PBEGJLNACDFHIKMOSTAR HUB REPLACEMENT PARTSSuperb quality replacement partsfor the Star wheel hub, as used on1936 thru 1957 models 61”, 74” and80” front and rear, 1937 thru 1952W-models rear and 1941 thru 1957Servicars front.A. 148076 Hub cover screw andlock washer kit (5 pack)B. 148071 Outer cover(OEM 43566-35A)C. 148070 Inner cover(OEM 43574-55)D. 148079 Adjusting shims 0.002(OEM 43560-35) 50 packE. 148078 Thrust washer thick(OEM 43563-35)F. 148077 Thrust bearing sleeve(OEM 43556-35)G. 148080 Retainer and rollerassy (OEM 24721-30 &9220A)H. 148081 Inner thrust washer(OEM 43552-39) 10 packI. 148082 Bearing collar(OEM 43561-39)J. 148083 Roller bearing sleeve(OEM 43550-35)K. 148084 Retainer and roller assy(OEM 43778-35 & 9220)Brake sideL. 148085 Brake side thrust washer(OEM 43558-39) 10 packM. 148087 Thrust washer lock ring(OEM 43554-35) 10 packN. 148088 Cork washer retainer(OEM 43564-35) 25 packO. 148089 Cork washer small(OEM 43570-35) 10 packP. 027508 Gasket and cork washerkit (OEM 43570-35 &43571-35 & 43576-31)STAR HUB COVER KIT148086 Complete kit, contains bothinner and outer cover (inner coverwith grease fitting) gaskets, corks andscrews with lock washer. Fits 1936 thru1966 star hub.WHEEL LUG WRENCH133013 Works on all models 1935thru 1972 with allen type lug bolts(OEM 94621-35).REAR AXLE SLEEVERear axle sleeves for Big Twin models1936 thru 1972.339016 Fits 1936 thru 1957 BigTwins (OEM 41600-36)235871 Fits 1958 thru 1962 BigTwins (OEM 41600-58)235872 Fits 1963 thru 1966 BigTwins (OEM 41600-63)235874 Fits 1967 thru 1972 BigTwins (OEM 41600-67)FRONT AXLE SLEEVE FOR STARHUB339014 Fits Big Twin models 1949thru 1966 with front mechanicalbrakes. Sleeve is complete with nut(OEM 43882-48).11-045

AB C DEF G H IJK L MN O P RAXLE AND WHEEL SPACERSA wide selection of OEM replacementspacers for the front or rear wheelsused on many models from 1973 topresent. Most spacers are available inyour choice of zinc or Chrome finish.The following listing is in OEM numberorder. All spacers are sold each.Zinc Chromefinish finish OEMA. 233515 710619 40910-84AB. 710713 710719 40915-94C. 233519 N/A 41196-83D. 710611 710635 41591-81E. 710609 710625 41592-79F. 233518 710624 41594-73Zinc Chromefinish finish OEMG. 710716 710848 41591-90H. 710610 710626 41595-86I. 233520 710629 41607-83J. 233517 710621 43358-83AK. 233516 N/A 43548-74L. 710712 710717 43617-95M. 710714 710731 43674-95N. 710614 710636 43648-86O. 233514 710617 43654-86AP. 710616 710656 43657-89R. 710715 710755 43683-97AWHEEL HUB AND BEARING SPACERFOR 1967 THRU 1972 BIG TWINSA. 145027 Hub spacer fits wheelhubs for FL models frontand rear from 1967 thru1972 (OEM 41196-55)B. 145025 Bearing spacer fits frontor rear wheel hub FLmodels 1967 thru 1972(OEM 43549-67)B11-046

FRONT AXLES12 3 4 5 6 7 8 9REAR AXLES1 2 3 4 5 6 7 8CHROME PLATED FRONT AND REAR AXLESThe widest selection of Chrome plated front and rear axlesavailable today is offered to you by Zodiac. Axles for modelsas far back as 1936 and as recent as the latest models.Axle shaft is machined from heat treated Chrome-molysteel, triple Chrome plated, machine polished and thenground (after chroming) to a size tolerance of ±.0005”.Rear axle nuts are penetration welded to the shaft andsmoothly machined before polishing and plating. Availableas: Axle only, hardware kit only, and complete kit of axle andhardware. Illustrations show contents of hardware as well asthe basic axle profile.Front axleFits OEM Kit, Axle Axle Hardware& hardware only only1. EL-UL-FL 36-48 43872-36 339055 339041 3390702. EL-FL 49-66 43875-48 339056 339042 3390713. FL 67-71 43875-67 339057 339053 3390714. FL 73-80, 43875-73 339058 339045 339072FXWG 80-835. FL 81-84, 43346-83 339059 339047 339073FXST 84-06FXSTC 84-06FXDWG 84-05FXWG 84-86, FLH/FLT 80-006. XL 73-77,FX 73-77 43871-73 339061 339046 3390757. XL 77-83,FX 77-83 43883-77 339062 339051 339075FXR 77-838. XL 84-87,FX 84-87 43883-84 339063 339082 339075FXR 84-879. XL 00-07 43895-00 N/A 339150 N/AFXD 00-03 NEWRear axleFits OEM Kit, Axle Axle Hardware& hardware only only1. EL-FL-UL 36-57 41552-36 339064 339043 3390762. FL 58-66 41552-58A 339065 339044 3390773. FL 67-72 41552-67 339066 339052 339078FX 71-724. FL 73-85,FX 73-85, 41552-73 339067 339048 339079FXWG 80-83, FXB 80-85chain drive5. FL 82-86, 41580-79 339068 339050 339080FXWG 84-86,FXB 80-85 belt drive6. XL 52-78 41551-52 339069 339049 3390817. XL 79-03 41563-77A 339085 339083 3390848. FXR 82-94, 41110-79A 339088 339086 339087FLH/FLT 80-01,Softail 86-06CHROME CASTLE NUTFOR REAR AXLES 1989TO PRESENTThis Chrome-plated castle nut and cotter pin set fitsall Original Equipment rear axles from 1989 to present(OEM 7987 & 511).339095 Axle nut and cotter pin11-047

NEWTHE Y’AXLE BY PAULYAFFE’S BAGGER NATIONPaul Yaffe’s new twist on theflush-mount axle. A greataccent to your front fork anda perfect way to lose that bigclunky thing your bike camewith. Axles are available withend caps in smooth chrome,Domino chrome or anodizedblack with machined Domino.Available in 3/4”, 1” or 25mmto fit all FLH & FLT Touringmodels to present.3/4” Y’axles, fit FLH & FLT Touring models 1986thru1999745000 Axle with chrome Domino cap745001 Axle with Black Domino cap745002 Axle with smooth chrome end cap1” Y’axles, fit FLH & FLT Touring models 2000 thru2007745003 Axle with chrome Domino cap745004 Axle with Black Domino cap745005 Axle with smooth chrome end cap25 mm Y’axles, fit FLH & FLT Touring models 2008 topresent745006 Axle with chrome Domino cap745007 Axle with Black Domino cap745008 Axle with smooth chrome end capCOLONY REAR AXLE SPRING CLIPBeautifully Chrome plated reproduction rear axle safetyspring clip for 1991 to present XL, FX and FL models(OEM 510).741820 Rear axle safety spring clip set of 511-048CHROME AXLE CAP KITSThese “deluxe” axle cap kits will fit most Harley modelsfrom 1971 to present and come complete with necessaryhardware and allen-key for easy installation. A must forevery Harley owner. Sold each. See chart for applicationand required quantity.Application Front pc. Rear pc.Dyna Glide1991 to present 301690 2 - -Dyna Wide Glide1989 to present 301690 2 - -FL 1949 thru 1971 301690 3 - -FL 1972 301690 2 - -FL 4 speed1973 thru 1980 301690 2 301693 2FL 4 speed 301690 2 301694 21981 thru 1984FLHR 1989 thru 1999 301690 2 - -FLHT 1980 thru 1988 301690 2 301694 2FLHT 1989 thru 1999 301690 2 - -FLT 1980 thru 1988 301690 2 301694 2FLT 1989 thru 1999 301690 2 - -FX 4 speed1973 thru 1980 301689 1 301693 2FXLR 1987 301690 2 301694 2FXR 1982-1987 301689 1 301694 2FXR 1988301690 2 301694 2FXR 1989-1994 301690 2 - -FXRS 1987 301690 2 301694 2FXWG 4 speed1980 thru 1981 301690 2 301693 2FXWG 4 speed1982 thru 1986 301690 2 301694 2Softail 1984 thru 1988 301690 2 301694 2Softail 1989 to present 301690 2 - -Sportster 1957-1972 - - 301693 2Sportster 1973-1980 301689 1 301693 2Sportster 1981-1987 301689 1 301694 1Sportster 1988 301690 2 301694 2Sportster 1989to present 301690 2 -

CHROME REAR WHEEL ADJUSTERSComplete selection of rear wheeladjusters for most models 1941 topresent. Each kit is beautifully Chromeplated and ready to install. Sold inpairs.339900 Fits all Big Twin models1973 to present (exceptDyna glide & 1987 upSoftail) and Sportstermodels 1979 to present(OEM 41530-84T)STAINLESS STEEL AXLE PLATESThese axle plates add a touch ofstyle to an otherwise bare area onyour motorcycle. Their unique designrequires no external mounting hardwareand in addition to looking good, theyreinforce most swingarms and protectthe finish from damage by the axle andaxle nut. Sold in pairs.339092 Fit all 4 Speed Big Twinsfrom 1973 thru 1986, allSoftail models from 1984to present, all Sportstermodels from 1988 topresent as well as the 1987Hugger339093 Fit all FXR models from1982 thru 1994BIG TWIN AXLE ADJUSTERSChrome finished stock replacementaxle adjusters. Fits all Big Twin models1941 thru 1972 and Softail models1987 to present (OEM 41576-36 with7800W & 47579-86/93 with 7783).Sold in pairs.339003 Axle adjuster set339139 Chrome axle adjuster set +1/2”339002 Fits Sportster and K models1954 thru 1978(OEM 41531-84T)CHROME AXLE ADJUSTER CAPSThese Chrome plated end caps add ahighlight to the end of your swingarm.Stronger than the OEM stampedsteel caps because of a die-castconstruction. Work in conjunction withstock axle carriers and even increasethe range of adjustment. Fit 1973 thru1986 4 Speed Big Twin, and 1979 thru1996 Sportster. Can be used on laterSportster models when the adjusterbolt holes are drilled to 3/8”. Sold insets of 2.099038 Chrome axle adjusters“PYRAMID” AXLE ADJUSTERSThese stylish “Pyramid” axle adjustersprovide the looks and at the same timestop swingarm distortion. The forgedsteel axle carriers fit exactly into theswingarm. End caps are Chrome plateddie-casted aluminum and the Chromesteelnuts have a long shank tapped topermit the full range of axle adjustment.Shape matches the form of the OEMswingarm. Fits all FXR models 1982thru 1994. Sold in pairs.339010 “Pyramid” axle adjuster kit“PYRAMID” AXLE ADJUSTERS099026 Chrome plated set of axleadjusters. Fits Zodiac Chrome FL/FX swingarm, all FL/FX 4 Speed discbrake swingarm 1973 thru 1986 andSportster models 1979 thru 1991.The forged axle carriers are machinedto close tolerances for a snug fit in theswingarm to eliminate the problem ofdistortion when the axle nuts are overtightened.Chrome end caps are diecastaluminum (OEM 41532-89T). Soldin pairs.CHROME AXLEADJUSTERSSteel axleadjusters withChrome finish.Fits Softail models 1987 to present.339107 Chrome axle adjuster set(OEM 47577-86, 47579-86and 7783)COLONY REAR AXLE ADJUSTERSExact OEM reproduction of the rearaxle adjusters for 1936-1972 Big Twinmodels (OEM 41576-36 and 7800W).Sold in sets.741815 Rear axle adjusters 1936thru 1972 Big Twin models11-049

BILLET AXLE SUPPORTUNIVERSAL WHEELSPACERSPHANTOM II COVERS FOR SOFTAILA billet machined axle support formost Big Twin Harleys. Will fit spoke orMag wheels using the 5-bolt pattern.Designed to help support the rearaxle on modified or high performancemotorcycles or when rear sprocket is“spaced-out” for wide tires. Bearing andhardware is included in each kit.238958 Axle support for FXR models238959 Axle support for Softailmodels238960 Axle support for FLHTmodelsMany wide wheels require spacingof the rear pulley or chain sprocketto get the those in line with the frontpulley or sprocket. Zodiac now offersspacers as universal as they can bemade in four different sizes. Each ofthese spacers can be machined downto the next size under without having toworry about the spigot alignment. Justmachine the face of the spacer downto the desired thickness. Spacers areavailable for 1984 thru 1999 and 2000to present applications. Can also beused as disc spacer for the same yearsof application.Fits 1984 thru 1999 front and rearhubs735006 1/2” Wheel spacer735007 3/4” Wheel spacer735008 1” Wheel spacer735009 1 3/4” Wheel spacerFits 2000 up front and rear hubs735014 1/2” Wheel spacer735015 3/4” Wheel spacer735016 1” Wheel spacer735017 1 3/4” Wheel spacerA sleek, streamlined set of die-castcovers that blend perfectly with theclean lines of the Softail frame andconceal the unsightly axle nut andadjusters. Covers are brightly Chromeplated and install in minutes. Fits late1986 Heritage Softail, and all otherSoftail models 1987 to present, exceptFLSTB Fat Boy, FLSTD Deuce andFLSTN Nostalgia with stock Shotgunstyle exhaust system. Sold in pairs forleft and right side.301590 Phantom II swingarm coversUNIVERSAL HUB SPACERSThese spacers are ideal to get beltpulleys and/or chain sprockets in lineand are available in four different sizes.The spacers can be machined down tothe next size under without having toworry about the spigot alignment whenyou machine the face of the spacerdown to the desired thickness. Spacersare available for 2000 to presentapplications. Can also be used as adisc spacer.Fits 2000 up front and rear hubs193085 Wheel hub spacer 1/2”193087 Wheel hub spacer 3/4”193088 Wheel hub spacer 1”193089 Wheel hub spacer 1 1/4”COLONY REAR AXLE ADJUSTERSFOR DYNA MODELSChrome plated swing arm plates andrear axle adjuster hardware kit. Fitsall Dyna models 1991 to present(OEM 41113-90).741819 Rear axle adjusters for Dynamodels11-050

COLONY REAR AXLE ADJUSTERSWHEEL SPINNER COVERFRONT WHEEL HUB CAPSBeautiful, Chrome plated wheel hubcaps. Available for FL with laced frontwheels 1949 thru 1984 as well asFXWG and Softail from 1984 to present(except Heritage, FatBoy and Springer)8” (20.32 cm).Chrome plated stock replacement rearaxle adjusters for Softail models 1986to present. Most axle adjusters are onesize-fits-all,while OEM axle adjusters aremade in a different length for differentyears. These Colony adjusters are aperfect copy of the OEM versions.741816 Rear axle adjusters for 1986thru 1992 Softail models(OEM 47579-86)741817 Rear axle adjusters for 1993thru 1999 Softail models(OEM 47579-93)741818 Rear axle adjusters for 2000to present Softail models(OEM 47579-00)This spinner cover fits on the rear hub ofall stock or aftermarket wheels. Made byKustom Tech from solid billet aluminum.Available in polished or Chrome.741135 Spinner cover, Chrome741134 Spinner cover, polished147017 Fit FL 1949 thru 1966 (OEM43303-49)147018 Fit FL 1967 thru 1972 (OEM43304-67)147036 Fit FL 1973 thru 1980 (OEM43304-73)147037 Fit FL 1981 thru 1984 (OEM44463-82)147034 Fit all FXWG and Softailmodels (except Heritage, FatBoy and Springer) from1984to presentABCHROME HUB CAP147083 Tapered style die-cast hubcap for with deep blue Chrome platedfinish that fits all Softail models with2000 to present wheel hubs. Mountinghardware included.WILD 1 CHROME HUB COVERSThese durable steel and show Chromed,USA made hub covers are designed forfront and rear wheel hubs, spoke aswell as aluminum wheels. Covers fill upthat dirty dead space between the rotorand hub flange on the front wheels aswell as pulley and the hub flange on therear wheels. Fits all stock and stockstyle hubs thru 1996.A. Straight front hub cover, brakeside700722 Fits FXSTS Springer 1992thru 1996B. FLSTF Fat Boy700729 Front hub cover11-051

WHEEL HUB CAP FOR 19” HARLEYFRONT WHEEL144466 Chrome plated, steel 4 3/4”(12.06 cm) dia. front wheel hub capfitsall 19” single disc cast wheels 1984to present. Replaces the standard wheelhub plate and screws. Mounts betweenthe front wheel bearing spacer and thefront axle.CHROME-PLATED SLOTTED WHEELHUB COVER147069 This stylish hub cover willdress up the front wheel andfeaturesdie-cast construction and beautifulChrome-plating. The cover attacheswith sockethead screws and fits allFXWG, FXST, FXSTC, FXSTS and DynaWide Glide (FXDWG) models from 1984to present.FLAT AND DOMED BEARINGCOVERSMeasuring a little over 2” in diameter,each of these bearing covers is aChrome-plated stamping that is heldin place between the axle or swingarmand the wheel spacer. A nice detail foryou own show bike, to clean up the areaaround your axles and bearings. Soldeach in two different styles Fits the rightside of single disc FX(R), Sportster,Dyna Glide with narrow glide front endsfrom 1984 to present, front FXWGmodels from 1980 thru 1983 and therear of 4 Speed Big Twin models from1973 thru 1984.301824 Flat bearing coverCHROME MINI HUB CAP FORFXWGAND SOFTAIL MODELSAvailable in two sizes, these hub capsare the perfect accessory for the frontwheel. Will fit all FXWG and Softailmodels 1981 to present (exept Heritageand FatBoy).147035 4 1/2” Diameter hubcap 1981 thru 1984 FLmodels with cast wheels(OEM 44443-81)147048 4 5/8” Diameter hub cap fitsall FXWG and Softail models1984 to present (exeptHeritage and FatBoy)HUB CAP FLSTF 1990 TO PRESENTThis stylish manufactured, dazzlingChromed hub cap is specially made forthe 1990 to present FatBoy. Covers thegap between the outer flange and thecenter of the hub (OEM 44447-90).144401 Hub cap 1990 to presentFits the right front of all HeritageSoftail and Fat Boy models from1986 to present301825 Domed bearing cover11-052