5SNCP6P?NN 'VF?SQR 5WQRCKQ #@MSR %F?NRCP - Rute66

Chapter 26 is all about parts from the world’s most famousCustom Bike Builders and Custom Parts Designers, ArlenNess. In this chapter we show “Quality Motorcycle Partsfrom Californian Craftsmen”. It is an extensive line of ShowCovers and Caps, Fenders, Forks, Mirrors, the Ness BigShot Fuel Injection controllers and the famous Ness BigSucker air cleaner kits.26-001

NESS COMPLETE LOWERING KITSEverything you need to lower thefront and rear of most late modelHarley’sSpecially designed dampenerslower the front end without replacingfactory springsBoth kits for Softail lower the frontof FXST models by 2 1/2” and FLSTmodels by 2” while the rear designsare adjustable to lower as much asdesiredDyna kit lowers the front FXD by 2”,and the rear by 1”Each kit includes 2 specially designeddampeners, 2 adjustable rear shockadjusters and a 1” shorter kickstand(fork oil not included) Note: Always check groundclearance when installing these kitsA17025A17025 Fits all 2000-up Softailmodels, with 41 mm forks,TÜV approvedSWEET-NESS 250 TIRECONVERSION KITS FOR TWIN CAMSOFTAILSSwingarm kits with classic Nessstyling reminiscent of our Y2K Dynaswingarms.Bolt on to your stock Softail withoutany modifications to your chassis.Compete kits include: swingarm,axle, axle covers, primary spacers,stainless steel splash guard, offsetengine sprocket, axle adjusters,gaskets and all necessary hardware.Kits available with our chrome No-Hole fender rails and our Bruiserfender.Accepts Ness-Tech® Jet-Eye or Rad IItaillight and license plate side mount. Note: Must use Ness Y2K Dynacaliper bracket and Ness/PM caliper.A19120TORPEDO AXLE COVERS FORSOFTAILSBeautiful die cast constructionDrastically changes the look of yourrear swingarmFits 2000-up Softail modelsSold in pairsA01590 Torpedo Axle CoversA19120 Sweet-Ness 250 SwingarmKit, blackA19121 Sweet-Ness 250 SwingarmKit, chromeA17026A17026 Fits all 1989-1999 Softailmodels, except Springer,TÜV approvedA17027Optional AccessoriesA06906 11” Fender Rails for FactoryFrames, chromeA07875 Sweet-Ness Bruiser FenderA07876 Sweet-Ness LongshotFenderA02523 Ness-Tech® 11.5”Rear Caliper Kit for Y2KSwingarm, chromeARLEN NESS ADJUSTABLE SLAMKIT FOR ALL 2002 – UP FLTRUBBERMOUNT MODELSInnovative design lowers the rearof any 2002-up FLT rubbermountmodelsAdjustable feature lowers your bikefrom stock height to 1 1/2” maximumKit includes 2 black powder coatedadjustable brackets and all necessaryhardwareInstallation time is approx. 30minutes Note: Always check fender to tireclearance on lowered applicationA17027 Fits all Dyna models 1990-up(with 39 mm forks)A17109 2002-2007 FLT ModelsA17110 2008 FLT Models26-002

NESS-TECH 41 MM COMPLETEBILLET FORK ASSEMBLIESThese complete kits offer excellentselection, quality and valueAll billet fork leg assemblies feature41 mm hard chrome fork tubes,progressively wound performancesprings, flush mount axle designsand accept 1984-1999 type calipermountsAll Ness-Tech triple trees aremachined from 6061-T6 billetaluminum and are beautifully chromeplatedEach kit includes 2 complete forkleg assemblies, triple trees, axle,neck stem, headlight mount and allnecessary hardwareChromed billet triple trees and forklegsAll fork assemblies measure 30 1/2” Note: Extended fork tube assembliesare available upon requestABNESS-TECH 41MM FORKASSEMBLIESSingle DualDisc DiscA.N/AA41110 Radius MassiveGlideA41104 A41114 Wide Glide RadiusSmooth TreesB.A41109 A41119 Rad II Trees/ -Radius SmoothLegsNESS-TECH 63.5 MM INVERTEDWIDE GLIDE FORK ASSEMBLIES63.5 mm Chrome fork legs with45 mm hard chrome fork tubesNess designed billet lower legsaccept special Ness-Tech/-Performance Machine 4-piston hiddencaliper that mounts to the backsideof the fork leg for a clean lookThree unique design of Ness-Techtriple treesComplete kits include choice ofNess Tech trees, 63.5 mm fork legassemblies, axle, fender mounts andnecessary hardwareCaliper sold separately Note: Fork assemblies measure 31”A63521 Fork assembly with Rad IITreesA63522 Fork assembly with Flat-NessTreesBATTISTINIGROOVEDNESS-TECH® “MASSIVE GLIDE”TREESCreates the illusion of popularinverted front ends.Available for 41 mm fork legs.Retains stock fender and brakemounting.Machined of 6061-T6 billet aluminumand then chrome- plated.Available in 4 stylesKit consists of triple trees, covers,stem,headlight mount, and allnecessary hardwareGreat combination with Ness-Techlower legs. Note: Fits stock FXST models. FLSTmodels must be used with -2” understock fork tubes. Models with stockFLT or FXST lower legs must be usedwith wheel axle ZPN 339059.A20215 GroovedA20225 RadiusA20200 BattistiniA20210 AccordionACCORDION26-003

NESS-TECH® RADIUS WIDE GLIDE,MID GLIDE AND NARROW GLIDETRIPLE TREE KITSCustom narrow glide trees for 35 mmand 39 mm fork tubesMid Glide and Wide Glide conversionkits for 39 mm fork tubesTwo styles to choose from, radiusstepped or radius smoothCam-locks secure fork assemblies intreesDesigned to accept factory stylehandlebar dampenersCNC machined from 6061-T6 billetaluminumAvailable in chromeNarrow Glide kits consist of top andbottom aluminum trees, steeringstem and allen top bolt, headlightmount and all necessary hardwareMid and Wide Glide conversion kitsconsist of top and bottom aluminumtrees, steering stem and allen topbolt, headlight mount, axle, axlespacers, one disc spacer and fenderspacersMID GLIDE 39 MM CONVERSIONKITSA20340 Radius smoothA20320 Radius smooth 2000 & upA20242 Optional disc spacer for DualDisc applicationsA20244 Optional disc spacer for DualDisc applications 2000 & upA20476 Mid Glide conversion axle,zincNESS POLYURETHANE HANDLEBARDAMPENER KITSThese polyurethane dampeners add amore positive feel to the handlebarswhile limiting vibrationsKit includes dampeners, inner sleevesand chrome washersA08005 Ness PolyurethaneHandlebar Dampener Kit39 MM WIDE GLIDE KITA20247 Optional disc spacer for DualDisc applicationA20249 Optional disc spacer for DualDisc application 2000 & upA20475 Replacement Wide GlideConversion AxleA20220 Replacement headlightmountWIDE GLIDE 39 MM CONVERSIONKITSChromeA20345 Radius smoothA20325 Radius smooth 2000 & upA20247 Optional disc spacer forDual Disc applicationsA20249 Optional disc spacer for Dualdisc application 2000 & upNESS NON-ADJUSTABLE HIDDENSPRING KICKSTANDSSpring-loaded kickstands in twodesigns.Choose from Radius and Rad II styles.Featuring a hidden ball bearing witha return spring for a positive feel andlock.All kickstand legs are fully chromed.Mounting brackets constructed fromstainless steel for durability.Radius Rad-IIA11037 A11041 Fits 1984-1999FXST models, front mountA11038 A11042 Fits 1984-1999FXST models, rear mountA11039 A11043 Fits 2000 topresent FXST models, rear mountA11040 A11044 Fits all FXRmodels, rear mount26-005

CUSTOM FORWARD KICKSTANDMOUNT FOR SOFTAIL AND DYNAGLIDE MODELSWorks with lowered bikesGrooved designChrome steel mountDesigned for 4 Speed Big Twin andSoftail model frames 1941-1999 and1991-up Dyna Glide modelsKit includes the necessary hardwareand chrome plated springReplacement kickstand includes thekickstand, mount spacer and springA11014 Custom Forward Kickstandmount for 1984-1999 SoftailmodelsNESS-TECH® BILLET FENDERRAILS FOR FACTORY SOFTAILFRAMESDesigned to accept custom fendersin 11” width on 1986 and newerSoftailsCarved for 6061-T6 billet aluminumClean blind hole designBeautifully chrome plated Note: Requires removal of factoryfender rail supportsA06906 Fits 11” fendersNESS LEGACY REAR FENDERSBeautiful Arlen Ness interpretationof the rear fender for HeritageSoftail ModelsApproximately 4” longer at the rearwith longer skirting for full lookSeveral widths to choose fromFiberglass constructionA06070 7 1/2”A06071 8 1/2”A06073 9”1” LOWERED KICKSTANDFOR 2000-EARLIER LOWEREDSOFTAIL MODELSA must when lowering a 2000 orearlier SoftailChrome plated forged steelA11016 KickstandNESS-TECH® FENDER RAILS FORFXR MODELSBolt-on application with hi-tech stylingMachined from 6061-T6 billetaluminumDesigned for all FXR Models 1987-1994Available in chromeNote:1982-1986 frames requireslight modificationA06910 NessTech® Fender Rails forFXR Models, 1987-1994NESS LEGACY FRONT FENDERSAvailable for all front endsCompliments our Legacy rearfenderWide 6 1/2” Width design to fit WideGlide front ends using a 16”, 17”, or18” wheelsConstructed of fiberglassA06072 Wide Legacy front fender26-006

NESS BELLBOTTOM FRONTFENDERAnother innovative design from ArlenNessDesigned to work with wide glidefront ends and 18”, 17” and 16”wheelsConstructed of fiberglassA06057 Bellbottom fenderBOB DRON FAIRING FOR ROADKING MODELSUnique design adds superb styling toall Road King ModelsFairing body constructed in heavyABS, windshield is smoked PlexiglasFairing kit includes 1 fairing body,1 smoked wind shield, necessarypolished stainless steel mountingbrackets, and windshield mountinghardwareA06950 Bob Dron Fairing kitcompleteA06951 Replacement smokedwindshieldNESS/BATTISTINI SADDLEBAGLATCH COVERSNew Battistini styling for a NessclassicMachined from 6061-T6 billetaluminum and beautifully chromeplatedLatch covers come supplied with apaintable black ABS plastic insert tocover the factory latchSold in pairsA03526 Battistini Saddlebag LatchCovers, ChromeWIDE-SPORT FRONT FENDERPerformance stylingDesigned to be used on Wide Glideswith 16”, 17” or 18” wheelsUndrilled for custom applicationsConstructed from heavy ABS plasticA06027 Wide sport Front fenderCAFE FRONT FENDERA Ness classicDesigned to fit most Narrow Glidestyle front endsConstructed of heavy ABS plastic19” 21”A06015 A06015 Un-drilledNESS-TECH® DRESSERSADDLEBAG LATCH COVERSDesigned for dresser models 1993-upRetains full functions of stock latchesAvailable in chromeSold in pairsA03520 Latch covers* All fiberglass fenders may vary1/4” in width26-008

BEFORENESS BAGGER REAR FENDERCOVER/SADDLEBAG EXTENSIONKITDeveloped to fit directly over existingrear fenders on FLT and RoadKing Models 1993-up with slightmodificationsFender cover designed to clean upugly gap between fender and factorysaddlebagsSaddlebag extensions can be boltedon or for custom applications, theycan be fiberglassed to existingsaddlebagsonstructed of fiberglassKit includes fender cover, twosaddlebag extensions and allnecessary mounting hardwareComponents also available separatelyA06696 Ness Bagger Rear FenderCover/Saddlebag ExtensionKit, 1993-1996A06496 Ness Bagger Fender Coveronly, 1993-1996A06697 Ness Bagger Rear FenderCover/Saddlebag ExtensionKit, 1997-upA06497 Ness Bagger Fender Coveronly, 1997-upA06396 Ness Bagger SaddlebagExtensions, pairFLT FRAME COVERSDesigned to dress your FLT modelframes 1993-upConstructed from ABS plasticOffers an attractive smooth lookcovering those ugly weld beads onstock frames Note: Order both parts for thecomplete smooth lookAFTERA03611 FLT Neck Frame Covers,1993-upBEFOREA03612 FLT Side Frame Covers,1993-1996ARLEN NESS FXR SIDE COVERSAvailable for all FXR models 1982-1994Constructed from high-impact ABSplasticConceals brake and electricalcomponents while yielding anappealing lookSold in pairsReady for prep and paint!PlainA03600 Arlen Ness FXR SideCoversNESS STASH TRAY FOR FXRMODELSDesigned for all FXR models 1982-1994Form fit to go under your seat foreasy access to tools, spark plugs,gloves, etc.Constructed from durable ABS plasticA20100 Stash Tray for FXR ModelsAFTER26-009

NESS FULL LENGTH VENTED AIRSCOOPS FOR STOCK FRAMESExclusive design from Arlen NessDesigned for stock framesAdds a whole new look to your bikeConstructed from ABS plasticReady for prep and paint!Kit consists of air scoop, aluminumvented screen, and all the mountinghardware necessaryA01507 Ness Full Length Vented AirScoop for 4 Speed Big Twinand FXST ModelsA01508 Ness Full Length VentedAir Scoop for Dyna GlideModelsNESS FAIRING KITSThe fairing that started it allDesigned to be used on all front endsConstructed of heavy ABS plasticwhile the windshield is made fromsmoked PlexiglasEach fairing kit includes 1 fairingbody, 1 smoked windshield, universalmounting brackets, and windshieldmounting screwsArlen suggests A08001 & A08006Fatbob drag handlebars with thisfairingA06045 Ness Fairing kitNote: When mounting fairing to 1973-up Harley-Davidson Narrow Glide frontends, we suggest using our customheadlight bracket (A06048) whichplaces the headlight in the correctposition to make mounting the fairing asnap. A06085 Ness Wide Glide Fairingkits require fabrication of custommounting brackets. Inverted front endsrequire fabrication of custom mountingbrackets as well.A06085 Ness Wide Glide and customMid Glide Fairing kit, doesnot include mountinghardwareReplacement windshieldA06046 Smoked windshieldA06048 Custom headlight bracketNESS-TECH® STEPPED ANDGROOVED DASH PANEL COVERSFOR ROAD KING MODELSAvailable for FLHR models 1995-upChrome finishA04133 Ness-Tech® Stepped DashCover for Road KingModelsA04135 Ness-Tech® Grooved DashCover for Road KingModelsA06086 Ness Louvered Fairing kit26-010

NESS-TECH® BILLET DASHPANELSTwo styles to choose fromDesigned to fit all Softail Models1984-up and FXDWG 1993-up withstock dash assembliesGrooved FlamedBillet upper panelA04175 A04179 Softail Models1984-95A04177 A04181 Softail Models1996-upA04174 FXDWG 1993-upBillet lower panelA04176 A04180 Softail Models1984-99A04172 A04183 Softail Models2000-upA04182 FXDWG Models1993-upNESS-TECH® BILLET DASH COVERASSEMBLIESExquisite design offers the look of aone-piece billet dashCNC machined of 6061-T6 billetaluminumA04124 Softail Models 1984-1995, ChromeA04125 Softail Models 1996-1999, chromeA04128 FXDWG 1993-1999A04145 Replacement Dash RubberNESS-TECH® DASH INSERTS ANDFUEL DOOR COVERS FOR FLTMODELS (EXCEPT ROAD KINGMODELS)Grooved pattern leans up the dasharea on most late model dressersMachined from 6061-T6 billetaluminumFuel door cover available for FLTmodels 1989-upLower dash insert fits FLT models1989-up except for the Ultra ClassicModelsAvailable in chrome finishA04136 Fuel Door Cover for FLTmodelsA04138 Lower dash insertsNESS PAINTABLE DASH COVERSThe perfect solution to fill the gapin the Fat Bob style gas tanks whenusing a large FL style speedometerComes ready to sand and paintNote: All the necessary mounting holesare pre-drilled for simple installationexcept for the odometer resetA04121 Ness Paintable Dash Covers,FL Models pre-1983A04120 Ness Paintable Dash Covers,1984-up Fat Bob TanksWESTBURY WELD-IN CUSTOM GASCAPUnique three point gas cap carvedfrom billet aluminumCompletes the radical look you’vebeen looking forCap features a unique venting methodto keep your tank trouble freeA07732 Weld-In gas cap for steeltanks26-011

NESS-TECH “LOWGRAVITY”SCREW-IN GAS CAPSLow profile design is available intwelve different stylesAll chrome-plated billet aluminumcaps measure 1/4” to 3/8” tallExclusive ratcheting design providesproper torque and design alignmentEarly screw-in gas caps fit all models1982-1996Late screw-in gas caps fit all models1997-up“Dummy” gas caps replace the fuelgauge style gas caps found on somelate Big Twin ModelsVented gas caps have right-handthread; non-vented have left-handthreadAll gas caps are sold eachABCFGHDIEJ1982-1996 1982-1996 1997-up 1997-upVented Non-vented Vented Non-vented DummyA07176 A07177 A07276 A07277 A07174 A RadiusA07152 A07153 A07252 A07253 A07167 B Baby MoonA07150 A07151 A07250 A07251 A07166 C PeakedA07156 A07157 A07256 A07257 N/A D GroovedA07158 A07159 N/A A07259 N/A E FlamedN/A A07161 N/A N/A N/A F SkullN/A A07163 N/A N/A N/A G RoundaboutA07178 A07179 A07278 N/A A07180 H LogoA07181 A07182 A07281 A07282 A07183 I ScallopedA07191 A07192 A07291 A07292 A07193 J Rad II 1982-199626-012

NESS-TECH BILLET PULLEYSAvailable in six popular Ness styles to accomplish Ness-Tech billet wheel assemblies.Patterns machined on both sides for a fancy look.Each pulley is CNC machined from one-piece 6061-T6billet Aluminum.70T pulleys are designed to accept the stock 20 mm belton FXST models 2006 to present.DD. Jagged A16930 70T, 20 mm wideAA. Psycho A16925 70T, 20 mm wideEE. Battistini A16931 70T, 20 mm wideBB. Slayer A16927 70T, 20 mm wideFF. Sweeper A16926 70T, 20 mm wideCC. Evil-7 A16928 70T, 20 mm wide26-013

NESS-TECH® BILLET WHEEL ASSEMBLIESPrecision machined from one-piece 6061-T6 forgedAluminum.Wheels are made and chrome plated in the USAEach wheel assembly includes hub, sealed wheelbearings, bearing center spacer, races and sealsMatching belt pulleys and brake rotors are available for allassemblies.DD. Jagged A26123 17” x 6.25” 2006 to present FXSTAA. Psycho A26120 17” x 6.25” 2006 to present FXSTEE. Battistini A26124 17” x 6.25” 2006 to present FXSTBB. Slayer A26121 17” x 6.25” 2006 to present FXSTFF. Sweeper A26125 17” x 6.25” 2006 to present FXSTNote: An additional hub adapter/hardware kit must beordered separately. Kit includes disc spacers, axle spacersand chrome plated hardware when necessary.A28352 Fits 2000 to present FXST models rearCC. Evil 7 A26122 17” x 6.25” 2006 to present FXSTOther sizes and applications available upon SpecialOrder26-014

Brake kit Bracket OnlyChrome Chrome Rotor SizeFront applicationsSingle disc 2000-upA02515 A02525 11 1/2”Single disc 1984-99A02940 A02872 11 1/2”Dual disc 2000-upA02517 A02525 11 1/2”N/AA02527Dual disc 1984-99N/A A02872 11 1/2”N/AA02878FXSTS 1988-99A02880 A02898 11 1/2”NESS-TECH®/PERFORMANCE MACHINE 4-PISTONBRAKE CALIPER KITSArlen Ness and Performance Machine join forces toprovide superior brake systems featuring the dynamicstyle and performance for your motorcycleExclusive design with grooved patterns on both calipersidesCNC machined from 6061-T6 billet aluminumBrackets feature outstanding style and strengthNess-Tech® Brake systems available for mostapplicationsKits include the caliper and the brackets, calipers andbrackets are also available separatelyRear applicationsSoftail Models 2000-upA02519 A02530 11 1/2”Softail Models 1987-99A02942 A02870 11 1/2”Dyna Glide Models 2000-upA02521 A02532 11 1/2”Dyna Glide Models 1991-upA02943 A02876 11 1/2”FXR Models 1987-94A02944 A02873 11 1/2”Sportster Models 1986-upA02895 N/A 11 1/2”Optional partsA02240 Caliper Only, Chrome, fits all of the aboveA02236 Brake pads, PM 125x4 equivalentA02237 Seal kit26-015

NESS-TECH®/PM HIDDEN CALIPER FOR NESS-TECH® HIDDEN CALIPER FORKSCompact 4-piston 2 pad designDesigned exclusively for Ness-Tech® hidden caliper forkassembliesChrome platedA02250 CaliperA02251 Brake PadsNESS-TECH® BRAKE TEESOne of the original custom brake tees to hit the marketCNC machined from 6061-T6 billet aluminumAvailable in chrome Note: IF means Inverted Flare, NPT means National PipeThreadA02115 Front 3/8”IF x 3/8”IF x 3/8”IFA02116 Rear 3/8”IF x 3/8”IF x 1/8”NPTA02117 Universal 1/8”NPT x 1/8”NPT x 1/8”NPTNESS-TECH® RADIUS 6-PISTON BRAKE CALIPER KITSNess-Tech® radius smooth flowing housingsNissin internal components for proven reliability andstopping powerCarved from 6061-T6 billet aluminumBeautifully chrome platedDirect bolt-on application for 1984-up modelsA02290 Front Single Disc 2000-up, left sideA02291 Front Dual Disc 2000-up, right side onlyA02292 Front Single Disc 1984-1999, left sideA02293 Front Dual Disc 1984-1999, right side onlyA02294 Rear 2000-up Softail ModelsA02295 Rear 1987-1999 Softail ModelsA02296 Replacement Brake PadsA02297 Seal KitBANJO BOLT WITH INTEGRATED BRAKE LIGHTSWITCHClean, innovative design3/8”–24 thread works on almost any applicationA01776 Banjo BoltNESS-TECH® BANJO BOLT COVERRadius stylingChrome-plated billet aluminumFits 1984-up models with stock master cylinders, caliperand brake hosesA01782 Banjo Bolt Cover26-016

GFNESS-TECH® MASTER CYLINDER COVERSA “Grooved” look for any custom applicationAll are CNC machined from 6061-T6 billet aluminumAvailable in chrome finish unless statedDABA03483 Louvered, Sportster Models rear 1982-1986 topcoverECPOLISHED STAINLESS BUTTONHEAD BANJO BOLTSButtonhead design flows nicely into Ness-Tech® banjofittingsTorx head design provides proper torque3/8-24 Banjo bolts accept 10 mm fittings7/16-20 Banjo bolts accept 12 mm fittingsSold individually or 5 packsEach 5-PackN/A A01784 3/8-24 single typeA01760 N/A 3/8-24 dual typeA01772 A01773 7/16-20 single typeNESS-TECH® HAND-POLISHED STAINLESS STEELBRAKE ADAPTER FITTINGEach fitting was designed with detail in mindBanjo fittings are machined with radius stylingEach banjo fitting includes a Banjo buttonhead allens thatmatch the radius of the banjo fittings perfectlyHex styled fittings are tapered at the edges for a cleanlookAll fittings are hand polished for a show winning lookCheck out the great pricing!A. A02054 10 mm banjo x #3 male straightB. A02055 10 mm banjo x #3 male 35°C. A02056 10 mm banjo x #3 male 90°D. A02057 12 mm banjo x #3 male straightE. A02058 12 mm banjo x #3 male 35°F. A02155 1/8” male NPT x #3 maleG. A02156 3/8”-24 male IF x #3 maleNESS-TECH® POLISHED STAINLESS STEEL AXLESPACERS FOR 2000-UP FORKSRadius design conceals factory sealed bearing for a cleanlookMachined from 303 stainless steelBright polished finishA01560 2000-up FLT models (pair)A01561 2000-up FXST, FXDWG models (pair)A01562 2000-up FLST models (left side)26-017

NESS RETRO-ROCKET HANDLEBAR- & FORWARDCONTROL KITSInnovative retro styling with modern day technology.All components are machined from 6061-T6 billetaluminum and chromed.Handlebar control kit available with 5/8” brake masterfor single disc applications with clutch lever assembly forcable operated clutchHandlebar control kit available with 3/4” brake master fordual disc applications with clutch lever assembly for cableoperated clutchThree-button switch block designed to work on eitherbrake or clutch side. Switch blocks sold separately.Matching design forward controls for 1984 thru 1999FXST models and 4-speed Big-Twin also available.Chrome BlackHandlebar control kit 5/8”brake master with cable clutch A08700 A08710Handlebar control kit 3/4”brake master with cable clutch A08701 A08715Handlebar control kit 5/8”brake master with hydraulic clutch A08702 A08714Handlebar control kit 3/4”brake master with hydraulic clutch A08703 A08716Forward control fits 1984thru 1999 FXST and 4-speedBig-TwinA07602 A07603Switch block, three-button. A08704 A08711Brake master cylinder 5/8” bore A08706 A08712Brake master cylinder 3/4” bore A08708 A08718Cable clutch lever assembly A08707 N/AHydraulic clutch mastercylinder 11/16” boreA08709 A08717NEWNESS-TECH® BILLET SHIFTER LEVERContemporary styling for your shift leverDesigned to work on FXR, Softail, FLT and Dyna Glidemodel applicationsConstructed from rugged 6061-T6 billet aluminumShow quality chrome finishFLT Models require A19781 spacerA19780 Ness-Tech® Billet Shifter LeverA19781 Spacer for FLT Models26-018

NESS-TECH® RADIUS FORWARD CONTROLCOMPO NENTSA19910 Radius shifter rod std. lengthA07640 5/8” Master Cylinder Rebuild KitA07641 3/4” Master Cylinder Rebuild KitA07642 3/4” Replacement Master CylinderA07629 Replacement M/C gasket for 3/4” M/CA07646 Chrome endcap cover, brake or shifter side eachFOOTPEG RECOMMENDATIONS FOR ALL NESS-TECHFORWARD CONTROLSOrder one pair of male mount footpegs and two shifterpegsFootpeg Shifter pegPair EachA07115 A07116 GroovedA06410 A06413 KnurledA06450 A06452 TwisterA06455 A06457 Diamond TwistA06460 A06462 FlamedA06475 A06477 Diamond FlatbandA07118 A07123 SteppedA06143 A06144 Ten-BandNESS-TECH® RADIUS FORWARD CONTROL KITSWITH INTEGRATED MASTER CYLINDERAvailable for Softail models, Dyna models, FXR modelsand most custom framesNewly designed with integrated 3/4” master cylinder forincredible stopping powerIntegrated brake light switch eliminates need for custombrake tee junctionsAll master cylinder linkage is hiddenShift controls feature space-age teflon bushings forsmooth operationAvailable in Stock and 3” Extended versionsCustom shifter rod includedCNC machined from 6061-T6 billet aluminumShow quality chrome finishAccepts any of our male mount style footpegs or our minifloorboards and shift pegs Note: kit does not include footpegs or shifter pegStock 3” ExtendedA07621 N/A 2000-up Softail modelsA07620 A07622 4 Speed Big Twin, Softail Models,Softail style custom frames and NessToughtail framesA07625 N/A Dyna Glide Models 1993-2005A07628 N/A FXR Models 1982-1994, Ness FXRand Ness Dyna Style frames26-019

NESS-TECH® SHIFTER RODSDesigned to work on Softail models 1986-upCNC machined from 6061-T6 billet aluminumShow quality chrome finish Note: Round grooved style is also available to fit Ness-Tech® or JayBrake forward controlsNESS-TECH® 3” FORWARD CONTROL EXTENSIONKIT FOR ALL 2000 TO PRESENT SOFTAILSMoves factory foot controls 3” forward to increase legroomIncludes black anodized billet aluminum adapter plates,extended stainless steel rear brake line, extended shifterrod, kickstand spring pin and necessary hardwareA07610 Fits 2000 thru 2006 Softail modelsA07611 Fits 2007 to present Softail models NEWA19900 “V” StyleA19901 SlottedRAD II MASTER CYLINDER RESERVOIR FOR 1999AND LATER FLT AND SOFTAIL MODELSRad II Style master cylinder for stock rear brake set upDie cast aluminium beautifully chrome platedA07648 Rad II Master CylinderA19902 Round groovedA19903 Round grooved for Ness-Tech® or JayBrakeForward ControlsA19905 Flat groovedA19906 Diamond StyleNESS TECH® BRAKE PEDAL COVERReplaces rubber pad cover on 1980-upFLT models and Heritage modelsChrome billet cover installs in minutesA03500 Brake Pedal Cover26-020

NESS-TECH® BRAKE PEDAL FOR FACTORYCONTROLSBetter comfort, better styleRadius design improves styling by 500%Pedal location provides easier access to activate yourrear brakeEach pedal is machined for 6061-T6 billet aluminum andthen beautifully chrome platedRubber Insert GroovedPad PadN/A A19785 1997-up FLT ModelsA19789 A19788 2000-up FXST ModelsNESS-TECH®FLOORBOARD SKINSthe base of rectangularstyled floorboards from1940-up6061-T6 billet aluminumA06845 Ness-Tech® Floorboard SkinsA06836 Replacement rubber for skins (8pcs.)NESS-TECH® RADIUS TEARDROP BILLETFLOORBOARD KITSNew Radius styled teardrop shaped floor boardsCNC machined from billet aluminum with a show qualitychrome finishKits consist of floorboards, rubber inserts all necessarymounting brackets and hardwareA06871 Road King Models 1994-up and FLT/FLHT/FLHS 1980-upA06888 Replacement rubber kits for 2 radius floorboardsNESS-TECH® FULL LENGTH BILLET FLOORBOARDKITSExtreme comfort and design from Arlen NessFloorboards measure 19” long by 4” wideKits consist of floorboards, all necessary mountingbrackets and hardware Note: Floorboards will not fit any motorcycle with a Ness2-into-1 collectorChromeA06814 Road King Models 1994-up and FLT/FLHT/FLHS 1980-upA06828 Replacement Rubber kits for 2 floorboards26-021

NESS- FULL LENGTH BILLET FLOORBOARD KITOffers exceptional comfort with a great appearance.CNC machined from 6061-T6 and chrome plated.Floorboard measure approximately 14” long and 5” wide.Kits include floorboards, rubber pads, brackets and allnecessary mounting hardware.Kit fits 1980 to present FLT/FLHT/FLHS models, 1986to present FLST, FLSTF and FLSTN models and 1994 topresent Road King models.A06818 Full length billet floorboard kit, ChromeA06812 Replacement rubber kit (42 pcs.)NESS-TECH® MINI FLOORBOARDSFit almost any front or rear factory footpeg applicationsMeasure a petite 8” long x 3 1/2” wideCNC machined from 6061-T6 billet aluminumEquipped with a rotating male mount or female mountAvailable in show chrome or highly polished finishKit includes boards, 8 rubber cushion inserts and thenecessary hardwareChromeA06840 Male MountA06832 Replacement rubber inserts (8pcs.)NESS PASSENGER FLOORBOARD KITMatching passenger floorboards for the Ness full lengthrider floorboard kitCNC machined from 6061-T6 aluminum and chromeplatedFits 1980 to present FLT models.Direct bolt-on using stock mounting hardwareA06819 Passenger floorboard kit ChromeA06813 Replacement rubber kit (24 pcs.)NESS-TECH® FLT PASSENGER FLOOR BOARDS 1989-UPDesigned for FLT Models 1989-upCNC machined from 6061-T6 billet aluminumShow quality chrome finishSold in pairsA06820 Ness-Tech® FLT Passenger FloorboardsA06821 Replacement rubber for skins (8pcs.)26-022

NESS-TECH® FOOTPEGS ANDSHIFTER PEGSMilled designs that compliment thematching billet gripsFootpegs are 1” longer than stock forincreased comfortShifter pegs are slightly longer thanstockAll pegs are CNC machined frombillet aluminumAll models available in show qualitychrome plated versionSelected models also available inblack and satin finishCDDCGHAEIAJBFKBNESS 1 1/4” CLAMP-ON PEGMOUNT FOR CRASH BARSChrome plated die-cast designAccepts male mount footpegsSold in pairsFootpegs sold separatelyA07190 Peg MountsMale Shifter Repl. RubbersFootpeg Peg Footpeg Shifter PegA. Diamond Flatband Chrome A06475 A06477 A06328 A06308B. Diamond Twist Chrome A06455 A06457 N/A N/AC. Twister Chrome A06450 A06452 N/A N/ATwister Black A07470 A07471 N/A N/AD. Flamed Chrome A06460 A06462 A06328 A06309E. Battistini Round 2Chrome A07460 A07462 N/A N/ABattistini Round Black A07480 A07481 N/A N/AF. Battistini Oval Chrome A07466 A07468 N/A N/ABattistini Oval Black A07482 A07483 N/A N/AG. Stepped Chrome A07118 A07123 N/A N/AH. Grooved Chrome A07115 A07116 N/A N/AGrooved Satin A07105 A07106 N/A N/AGrooved Black A07472 A07473 N/A N/AI. Knurled Chrome A06410 A06413 A06308 A06309Knurled Satin N/A A06423 A06308 A06309J. Ten Band Chrome A06143 A06144 N/A N/AK. Horizontal Chrome A07474 A07475 N/A N/ATorpedo Chrome A06464 A06465 A06400 N/ARocket Chrome A07478 A07479 N/A N/A26-023

NESS-TECH® RAD II HANDLEBARCONTROLSRadically sculptured Ness design.Invisible mounting design for body, lidand leversBearing mounted levers for smoothoperationCarved from 6061-T6 billet aluminumKits include master cylinder, clutchlever, perch and switches whereapplicableElegantly chrome plated Note: 5/8” bore for single disc, 3/4”bore for dual disc applicationsSwitch SmoothStyle StyleA08650 A08652 5/8” completekitA08651 A08653 3/4” completekitA08655 A08657 5/8” mastercylinderA08656 A08658 3/4” mastercylinderA08662 A08663 Clutch leverperchA08664 A08664 Clutch leverA08665 A08665 Master cylinderleverA06628 A06628 5/8” rebuild kitA06629 A06629 3/4” rebuild kitA06625 N/A ReplacementswitchA08621 N/A Button capA08666 A08666 Replacement lidgaskeA08648 A08647 Hydraulic ClutchM/C26-024

NESS-TECH® RADIUS HANDLEBARCONTROLSA bold design in handlebar controlsFeatures a very unique mountingsystem with no visible hardwareTotally new lever design yields ashorter clutch pull than stock leversAvailable in switch or smooth stylesMaster cylinders available in 5/8”bore size for single disc applicationsor 3/4” bore size design for dual discapplicationsCNC machined from 6061-T6 billetaluminumShow quality chrome finishKits consist of handlebar mastercylinder, clutch perch and lever orhydraulic clutch master cylinder,switch housings, switches andbuttons Note: There is no provision for abrake light switch, if used it must bemounted on a brake line teeRadius Handlebar Control KitsSwitch SmoothStyleA08600StyleA08602 5/8” with cableclutchA08601 N/A 3/4” with cableclutchA08640 N/A 5/8” withhydraulic clutchIndividual Radius ControlAccessoriesSwitch SmoothStyle StyleA08605 A08607 5/8” brakemaster cylinderA08606 A08608 3/4” brakemaster cylinderA08612 A08613 Clutch cableperch with leverA08615 N/A Clutch cablelever onlyA08616 N/A Brake Mastercylinder leveronlyA06625 Potted Replacement switchwith 30” wire leads, 1997-upproduction (Can be used inearlier produc tion with slightmodification)A06620 Switch, eachA08621 Button, eachA06628 5/8” Rebuild kit (brake)A06629 3/4” Rebuild kitA06634 5/8” Hydra clutch rebuild kitA06623 Replacement lever plungerfor Master cylinderNess-Tech® Billet Grips andThrottles are also available,see grip sectionA06620RADIUS MASTER CYLINDER COVERAND “SUPER SEAL” GASKETUpgrades all pre 1999 Ness Radiushandlebar master cylindersKit includes chrome master cylinderlid, super seal gasket and chromehardwareA06606 Brake sideA06607 Clutch side26-025

NESS-TECH ® “PETITE” SWITCH AND “CUSTOM”HANDLEBAR CONTROLSNess designed billet controls are CNC machined for aclean look“Petite” style feature small button switches that arevirtually invisible“Custom” style are designed for the rider who wants cleanswitchless handlebarsBoth designs are available in kit form with 5/8” or 3/4”bore master cylinders5/8” Bore for single disc applications; 3/4” bore for dualdisc applicationsKits include handlebar master cylinder, clutch perchand lever or hydraulic clutchmaster cylinder, and switchhousings. Switches included where applicable; grips andthrottle housings are sold separately and are listed in theswitch sectionNESS-TECH ® HANDLEBAR CONTROL KITS FORSTOCK SWITCHESThese Ness-Tech® control kits are designed to give yourhandlebars a much cleaner appearance while retainingyour stock switch gearAll kits are CNC machined and available in chrome5/8” Bore for single disc applications; 3/4” bore for dualdisc applicationsKits include handlebar master cylinder, clutch perch andlever or hydraulic clutchmaster cylinder, switch housingsand necessary hardware Note: Grips and throttle housings are sold separately andlisted in the trottle section1996-up Kits Cable Clutch Hydraulic Clutch5/8” Bore A08506 N/A3/4” Bore A08507 A085551982-95 Kits5/8” Bore A08510 N/A3/4” Bore A08511 N/A1972-81 Kits5/8” Bore A08512 N/A3/4” Bore A08513 N/ACableHydraulicClutchClutch“Petite” Kits5/8” Bore A08514 A085503/4” Bore A08516 A08551“Custom” Kits5/8” Bore A08534 A085523/4” Bore A08536 A08553NESS-TECH ® BRAKEAND CLUTCHHANDLEBAR MASTERCYLINDERS6061-T6 billet aluminumapplicationsapplicationsCustom styleA06640 5/8” bore brake sideA06641 3/4” bore brake sideA06646 Replacement brake leverA06647 “Custom” clutch lever perchPetite Switch StyleA06665 5/8” bore brake sideA06666 3/4” bore brake sideA06661 5/8” bore clutch sideA06646 Replacement brake leverStock Switch StyleA06642 5/8” bore brake side26-026

BATTISTINI START BUTTONMachined from stainless steel withflat designIncorporates electrical switch andmounts flush to any flat surfaceA06603 ChromeNESS-TECH ® “PETITE” SWITCHCLAMPDesigned to work with Ness-Tech®Custom, JayBrake, and PerformanceMachine handlebar master cylindersSwitches will work for turn signal,starter, horn and kill functions or hilowusing A15500 switch relay Note: A06625 Late productionreplacement switch can be used inearly production models with slightmodificationA06639 Petite switch clamp, chromeA06620 Replacement switch, earlyproduction, eachA06625 Potted Replacement switchwith 30” wire leads,1997-upproduction, eachA06621 Button cap, eachTHE ZODIAC BRAIN BOX“The Brain Box” is a trick little box thattakes away all the headaches whenwiring your custom motorcycle. Sixmicro wires run to your switches withbuilt in functions that include startrelay, hi low relay, kill switch relay,and turn signal relay. The Brain Boxis programmable with your handlebarswitches to select if the turn signalsoperate as self-canceling or manualcanceling. All switches wire to ground,which reduce the number of wires andincrease the life span of your switches.The Brain Box measures 1” x 2” x 3”(2.5 x 5 x 7.5 cm), small enough to befitted under your tank or seat. Comeswith color-coded wires, and an easyto follow installation instruction. Saveshours and keeps wiring to a minimumfor a cleaner look. A must for anyCustom Bike Builder.Electrical SpecificationPower Supply: Motorcycle 12 Volt DCbattery systemCurrent consumption: 80 mA. NominalIgnition output: 500mA to 10AHeadlamp output: 500mA to 10AIndicator output: 500mA to 10AHorn output: 500mA to 10AStarter Solenoid output: Max pull incurrent 25A.Max hold in current 5A.Module Wires: Thin wall automotivecable manufactured in accordance withISO 6722Mechanical SpecificationCase: Molded from flame-retardantABS plastic (UL94V-0), measures 1” x2” x 3” (2.5 x 5 x 7.5 cm)Warranty12 months from the date of purchase741360 Brain Box26-027

NESS-TECH® STOCK STYLESWITCH HOUSINGSSwitch housings developed to acceptfactory switchesDesigned to work with Ness-Tech®,JayBrake and Performance Machineswitch panel type handlebar mastercylinders and clutch perchesChromeA03155 Left or Right 1982-1995,eachA03156 Left or Right 1972-1981,eachREBUILD KITS FOR NESS-TECHMASTER CYLINDERSLate style master cylinders wereproduced in 1994-up, have a straightreturn spring and will have REV Cstamped into the body in the areawhere it mounts to the handlebarA06628 5/8” Bore Brake M/CA06629 3/4” Bore Brake M/CA06634 5/8” Hydraulic ClutchNESS-TECH RAD II CLUTCH ANDBRAKE LEVER SETSDesigned for 1996 and newer factoryhandlebar controls including V-RodCarved from 6061-T6 Billet aluminumCutting edge Rad II stylingBeautifully chrome platedSold in sets or eachA06675 Set, fits all 1996-up models,except V-Rod and hydraulicclutch modelsA06670 Brake lever, fits all 1996-upA06672 Clutch lever, fits all 1996-up,cable typeA06671 Clutch lever, fits V-Rod andother hydraulic clutch typesALTERNATIVE HANDLEBAR GRIPSNew series of value priced parts fromArlen NessAll styles are designed to fit thecontour of your handsChrome finishSold in pairsA07134 Torpedo (billet)A07133 Horizontal (billet)A07095 Twist (die-cast)26-028

NESS-TECH® HANDLEBAR GRIPSWITH ROLLER BEARING (PATENTPENDING)Innovative roller bearing designeliminates throttle stiction andunnecessary play.Turning has never been smoother oreasier.Accepts 1976-up single and dualcable throttles.CNC machined from 6061-T6 billetaluminum.Available in chrome or blackanodized.Chrome BlackA07136 A07148 TwisterChrome BlackA07139 N/A Diamond TwistChrome BlackA07143 N/A Ten-BandChromeA07138BlackA07146 Ness/BattistiniRoundChromeA07107BlackA07147 GroovedChrome BlackA07275 N/A DiamondFlatbandChromeA07141BlackA07149 Ness/BattistiniOvalChrome BlackA07245 N/A SteppedChrome BlackA07102 N/A KnurledChrome BlackA07144 N/A RocketChrome BlackA07103 N/A FlamedChrome BlackA07111 N/A FlatbandReplacement partsA07110 Flatband rubbers, 10 pcsA07112 Diamond Flatband rubbers,12 pcsA07210 Ten Band rubbers, 20 pcs26-029

NESS-TECH® BILLET THROTTLEHOUSINGSPerfect compliment to our Billet gripsAvailable in Radius or Grooveddesigns with or without petite switchCNC machined from 6061-T6 billetaluminumAvailable for single and dual throttleapplicationsGrooved RadiusChrome ChromeSingle cableA20294 A20283Dual cableA20293 A20285NESS-TECH® LEFT-SIDE “FALSE”BILLET THROTTLE HOUSINGSFor use on the handlebar’s left sideBalances out the looks of the bike’shand controlsAvailable in Radius or GrooveddesignsAvailable plain or with petite switchCNC machined from 6061-T6 billetaluminumShow quality chrome finish onlyPlain W/SwitchRadius A20276 A20275Grooved A20279 A20278GRIP-WINGS FOR NESS-TECHGRIPSDesign adds support to the palm ofyour handCan be used on throttle or clutch sideIncreases leverage on throttleapplicationBeautifully chrome-plated and installsin minutesA07199 Grip-wing 1.4” for billetgroove flamed, Battisitinis/Ness, sold eachSwitch style single cableGrooved RadiusChrome ChromeA20297 A20287ALTERNATIVE GROOVED CABLECLAMPSBillet look, die-cast constructionChrome platedEconomically pricedA03196 1 1/8” clutchA03197 1 1/4” clutchA03199 1” dual throttleNESS ROLLER BEARING THROTTLEKIT FOR FACTORY STYLETHROTTLE TUBESTurning your throttle has never beeneasier or smootherInnovative design allows your factorythrottle tube to ride on a rollerbearing instead of dragging on yourhandlebarNote: Requires cutting 1/2” from theright side of handlebarA07099 Roller Baring Throttle Kit26-030

ABNESS-TECH CHROME BILLET CABLE CLAMPS2 Styles to choose fromClean mounting for various cable applicationsChrome plated CNC machined billet aluminumA. Radius B. GroovedN/A A03175 1” to ClutchN/A A03176 1 1/8” to Clutch (all Pre-82 Modelsand all Softail Models, DayTecframes for Softail Models)A03167 A03177 1 1/4” to Clutch (FXR/FLT andSportster Models 1982-up, Ness-Tail, Ness Dyna Style and FXR Styleframes)A03164 A03174 1 1/2” to Clutch (All Dyna GlideModels)A03168 A03178 1” to Single throttleA03162 N/A 1 1/4”Dual ThrottleA03163 N/A 1 1/4” ThrottleNESS-TECH® FLUSHMOUNT POLYURETHANEHANDLEBAR DAMPENERKITSClean flush mount designBeautifully polished 303 stainless steel custom washersSoft durameter urethane bushing absorbs vibrationAvailable with fine or course allen hardwareA08004 Flush mount kit, fine thread applicationsA08002 Flush mount kit, course thread applicationsNESS POLYURETHANEHANDLEBAR DAMPENERKITSThese polyurethane dampeners add a more positive feelto the handlebars while limiting vibrations.Kit includes dampeners, inner sleeves and chromewashersA08005 Ness Polyurethane Handlebar Dampener KitWIRE PLUS DIGITAL SPEEDO/TACH INFORMATIONSYSTEMThe smallest unit in the industryEach system includes speedo, tach, odometer, turn signalindicator, oil pressure and hi beam indicatorChrome plated billet housing attaches to custommounting bracket that are sold separatelyWorks on single fire or dual ignitions with electronicpickup in transmissionA04850 Digital Information systemA04851 1” Handlebar bracketA04852 1 1/4” Handlebar bracketNESS-TECH® TORPEDO BULLET MOUNTS FORDAKOTA DIGITAL 2 1/16 GAUGESTorpedo cover mounts directly to any 1” or 1 1/4”handlebar by drilling and tapping a 1/4”-28” holeAccepts any 2 1/16” Dakota Digital GaugesCarved from 6061-T6 billet aluminumBeautifully chrome platedTopMountA06050 1” handlebar applicationsA06051 1 1/4” handlebar applications26-031

NESS 1 1/4” RAM BARSThese are a re-make of the firstproduct ever made by Arlen in 1970Smooth curvaceous bends featuring1 1/4” tubingExcellent comfortSizes in width, rise and PullbackA08033 Ram Hi Bars with indents30 1/4” x 12 1/2” x 10 1/4”A08040 Ram Hi Bars without indents30 1/4” x 12 1/2” x 10 1/4”A08032 Ram Lo Bars with indents30 1/4” x 10 3/4” x 11 1/2”1” & 1 1/4” LATE STYLE FATBOBDRAG BARS (TALL)These are the famous “Ness-Dragbars”Now available in 1” and our new1 1/4” diameter for that stylish “Fat-Look”Bars are 2” higher than our regularFatbob drag barsFeatures 7 1/4” rise 11” pullback and25 1/2” width at bar endsA08006 1” Fatbob Drag Bars withindentsA08007 1” Fatbob Drag Bars withoutindentsNESS 1 1/4” FLYBARSCurvaceous stylingLooks great on any applicationIndented models feature internalwiring holes and guidesAvailable in two heightsSizes in width, rise and PullbackA08021 Fly Hi Bars with indents30 1/2” x9 1/2” x8 1/2”A08038 Fly Hi Bars without indents30 1/2” x 9 1/2” x 8 1/2”A08020 Fly Lo Bars with indents30 1/2” x 7 1/2” x 8”A08037 Fly Lo Bars without indents30 1/2” x7 1/2” x8”1” & 1 1/4” FATBOB DRAG BARS(SHORT)Bars are wider and pullback furtherthan our standard drag barsBars feature a rise of 5 1/4”, a 10”pullback and a 25 1/2” width from tipto tipA08001 1” Fatbob Drag BarsA08008 1” Fatbob Drag Bars withinternal wiring guide-holes1” & 1 1/4” V-DRAG BARSAnother new design from ArlenNess featuring unique V-StylingNow available in 1” and our new1 1/4” diameter for that stylish “Fat-Look”Work great on FXST, FXR and DynaGlide ModelsMeasure 7 1/4” tallA08034 1 1/4” V-Drag BarsA08030 1” V-Drag Bars with indentsA08031 1” V-Drag Bars withoutindentsNESS 1 1/4” LOWRIDER BARSThese are the same bars we madeback in 70’sBrought back by demand in 1 1/4”tubingLooks and feels great!Sizes in width, rise and PullbackA08022 Lowrider Bars with indents29 1/2” x 12” x 12 1/4”A08049 Lowrider Bars withoutindents 29 1/2” x 12” x 12 1/4”26-032

A08028A08041A08057ARLEN NESS HANDLEBARSNOTE: HANDLEBARS WITH BUILT-IN RISERS REQUIRECHROME ALLEN MOUNTING BOLT KIT ZPN A01471Each design is available for the following applications:1 1/4” With built-in risers: Features 1 1/4” fat look tubingwith 1” long built-in risers. These bars bolt directly to yourtop triple tree and are drilled for internal wiring.1” With built-in risers: Features 1” tubing with 1” long builtinrisers. These bars bolt directly to your top triple tree andare drilled for internal wiring.1 1/4” for 1 1/4” clamps: These bars are designedexclusively for Ness-Tech 1 1/4” riser assemblies and aredrilled for internal wiring. Will not work with factory stylehandlebar clamp assemblies.1 1/4” for factory 1” clamps: These bars are designedto work with 1” factory handlebar clamp assemblies(except FLSTS and FXSTS). They are pre-drilled forinternal wiring.1” With indents: These bars can be used on models 1982to present applications.1” Without indents: These bars can be used on mostuniversal applications.1 1/4” FXSTS, FLSTS: These bars fit exclusively factorySpringer models. They are pre-drilled for internal wiring.Styles:Dresser: 10” rise x 11” pullback x 34 1/2” widthFlat Track: 8” rise x 12 1/2” pullback x 29” widthApehanger: 22” rise x 9” pullback x 35” widthDrag: 0” rise x 6” pullback x 30” widthA08024A08016A08058Size Dresser Flat Track Apehanger1 1/4” with built-in risers N/A A08024 A080281 1/4” for factory clamps N/A A08057 A080581 1/4” for 1 1/4” clamps A08041 N/A N/A1” with built-in risers A08025 N/A A080271” with indents N/A A08016 N/A1” without indents N/A A08015 N/A26-033

NESS-TECH® CUSTOM SPEEDOBRACKETSThese speedometer bracketsare designed to mount variousspeedometers or tachometers toany 1” or 1 1/4” T-bars featured onprevious pagesAll billet aluminium brackets arechrome-platedChromeDiameter Single Single84-94 CustomGauge 2 5/8”1” A06108 A061101 1/4” A06090 A06030Diameter Dual Dual84-94 CustomGauge 2 5/8”1” A06109 A061111 1/4” A06092 A06032PolishedDiameter Dual 84-94Gauge1” A06119OVAL STEPPED MIRRORSDie cast constructionBeautifully chrome platedSold individuallyA13003 Oval Stepped Mirror withSoftbend StemA13044 Oval Stepped Mirror withRadial StemVISION MIRRORSDie cast versions of our Vision billetaluminum mirrorsGreat Ness style for the budgetconscious bikerAvailable in chromeSold individuallyA13009 Vision Mirror with SoftbendStemA13050 Vision Mirror with RadialStemALTERNATIVE DIE-CAST MIRRORSGreat style and visibility!Large design offers incrediblevisibilityBig-Eye design measures6 3/8” x 3 5/8”Billet look, die-cast priceFit left or right applicationsIncludes hardware and adapters tofit most Harley-Davidson and cruisermodelsBrillant chrome finishA13020 Big-Eye SteppedA13024 Big-Eye PlainNESS DIE CAST MIRRORSStylish designs for your customapplicationChrome plated die cast constructionAll four styles feature convex glassHardware for Harley and Cruisermodels includedA13100 Cross die castNESS CAT-EYE SOFTBEND DIECAST MIRRORSFree flowing stylingQuality die cast constructionFit right or left side of handlebarsChrome platedHardware for Harley and Cruisermodels includedA13045 GroovedA13046 SmoothA13104 Cross die cast, Steel Stem(sold in pairs)A13070 Flamed Mirror, Right26-034A13071 Flamed Mirror, Left

ALTERNATIVE POCKET TURBOMIRRORSDie-cast versions of our PocketTurbo billet aluminum mirrorsFinished in chromeGreat Ness style at an affordablepriceNESS CAT-EYESmall stylish designs for your customapplicationChrome plated die cast constructionHardware for Harley and Cruisermodels includedA13068 3D Cat-Eye, leftA13069 3D Cat-Eye, rightNESS TEARDROP MIRRORS WITHSTEEL STEMGreat design with great visibilityMirror heads feature die castconstruction and convex glassChrome steel stems position mirrorhead for great visibilityEconomically priced Note: Cruiser models availableA13035 Teardrop Mirror, leftA13036 Teardrop Mirror, rightLeftA13030RightA13031 GroovedNESS-TECH® BAGGER MIRRORSETSlick design mounts directly to theinner fairing on all 96-up FLT modelsEliminates clutter on your handlebarsEach kit consists of right and leftside billet mirrors, 2 interferingadapters,andall necessary hardwareSold in pairs and beautifully chromeplatedA13150 Bagger mirror setALTERNATIVE SLINGSHOTDIE-CAST MIRRORSChoose from 2 great stylesAwesome oval styling with an offsetheadFit left or right applicationsExcellent visibilityDie-cast versions of our SlingshotBillet Aluminum mirrorsNess style at an affordable priceAvailable in chrome finishA13040 GroovedA13033A13034 SmoothNESS-D.S. STEALTH MIRRORSWITH SHORT AND LONG STEMDesigned to be used on either theright or left sideHas an oval head measuring5” x 2 1/2”Available with short or long stemsDie-cast versions of our Stealth billetmirrorsChrome finishGreat valueA13058 Stealth II mirror with 6” longstemA13043 Smooth26-035

NESS-TECH® BILLET ALUMINUMMIRRORSThe original billet mirrors that startedit allAvailable in Oval, Cateye and RoundheadsMirror heads pivot on a stainlesssteel ball joint for long lifeWorkmanship and durability of thesemirrors are far superior to any othermirror on the marketWork for both left and right sideapplicationsCNC machined from 6061-T6 billetaluminumSold individuallyReplacement glass available Note: Mirrors do not accept the“Whisker” light kitsSTEALTH GROOVEDReplacement PartsA13182 Radial StemA13183 Stealth StemA13086 Cateye glassNESS-TECH® VISION MIRRORFeatures Ness-Tech® grooves and anoffset headFit left or right sidesCNC machined from 6061-T6 billetaluminumFinished in chromeSold separatelyNESS-TECH® BILLET MIRROR/TURN SIGNAL KITSBright turnsignals with dynamic styledmirrorsCNC machined from 6061-T6 billetaluminumReady to install kit includes 2 billetmirror heads, 2 billet mirror stemswith “Whiskers” installed and all thenecessary hardware Note: Some models may requirea Heavy Duty flasher unit or loadequalizer ZPN 237331 or 238331SatinA13268 Oval LouveredA13306 Vision mirrorChromeA13247 SlingshotNess-Tech® Oval Billet AluminumMirrorsChromeA13081 Stealth FlamedA13080 Radial FlamedSTEALTH LOUVEREDNess-Tech® Cateye BilletAluminum MirrorsChromeA13184 Radial LouveredA13186 Radial GroovedNESS-TECH® POCKET TURBOMIRRORFeatures a decorative pocket with anoffset headCNC machined from 6061-T6 billetaluminumFinished in chromeSold separatelyA13300 Pocket Turbo mirror, LeftA13301 Pocket Turbo mirror, RightNESS-TECH® “TERMINATOR”SERIES MIRRORSOne-piece design features a uniqueswivel adjustment at the base of themirrorDesigned to work on most drag andflattrack type handlebarsCNC machined from 6061-T6 billetaluminumAvailable in chrome finishSold separatelyChromeA13343 Turbo Left26-036

NESS DIE-CAST STEALTHMIRROR/TURNSIGNAL KITSFeatures the “Whisker” turn signals already installedNo drilling, ready to be installedSold in pairs Note: A heavy-duty flasher or load equalizer may berequiredA13253 Ness Die-Cast Stealth Mirror/ Turn Signal KitsA13096 Replacement halogen bulb, eachUpsweptLeftA13048A13038RightA13049 ChromeA13039 BlackNEWNESS MICRO DIE CAST MIRRORSSmall stylish designs for your custom applicationChrome plated or black powder-coated die castconstructionAll five styles feature convex glassHardware for Harley and Cruiser models includedSold eachMini OvalLeftA13041A13055RightA13042 ChromeA13056 BlackNEWRad II TeardropLeft RightA13051 A13052 ChromeA13021 A13022 BlackNEWFour PointLeft RightA13062 A13063 ChromeA13074 A13075 BlackNEWScoopLeftA13060A13028RightA13061 ChromeA13029 BlackNEW26-037

“WHISKER” TURN SIGNALS FOR DIE-CAST MIRRORSFit Ness-D.S. die-cast short stealth mirror stemsFeature halogen bulbs for long life and excellent visibilityComplete instructions included with kitMade in the USASold in pairs Note: A heavy-duty flasher or load equalizer may berequiredA13095 Turn signal kit, amberReplacement partsA13096 Halogen bulb, eachA13120 Lens kit, frontA13122 Threaded hollow mounting studNESS-TECHRADIUS IIEVOLUTIONBILLET ROCKERBOX KITCurvaceous new 2 piece design adds elegance to yourEvolution Big Twin, Sportster, or S&S MotorAccepts roller rockers or OEM style rocker armscompatible with up to .700 lift camsKit include 2 complete rocker box assemblies as well asall necessary hardwareNote:Must use adjustable pushrods. Rocker boxes willnot fit fuel injected models.A18275 Smooth, ChromeNESS-TECH®TWIN CAM BILLET ROCKERBOX KITSCurvaceous Radius design rocker boxes add elegant styleto your Twin CamBillet aluminum housings accept OEM rocker arm supportassembliesViton o-rings used for superior sealingIncludes necessary chrome hardwareSold in pairsA18255 ChromeNESS-TECH“RADIUS” AND“RAD II” BILLETROCKERBOXESCurvaceous “Radius” or cutting edge “Rad II” stylesCarved and chromed from 6061-T6 billet aluminumValve covers include rocker arm supports and allnecessary hardwareTwin Cam models also fit all S&S 124”, 117”, 111”4 1/8” bore enginesEvolution models fit all 1984-1999 Big Twins as well as all4” bore and smaller S&S Evolution style enginesAll rocker boxes have clearance to accept S&Scompression releasesViton O-rings used for superior sealingSold in pairsRadiusRad II SmoothTwin Cam 4 1/8” Bore A18287 A18255Evolution Models A18285 A18275*Will not fit in stock frame. Must be used in 2” ormore stretch frame.26-038

NESS-TECH® CAMCOVERS FOR TWIN CAMMODELSstyle to your new motormodels2001 -up modelsChrome hardware included Note: Diamond design may be used on 2001-up modelsby plugging sensor hole on cam coverOval Smooth A03990Diamond Smooth A03994NESS-TECH® BILLETPUSHROD COVERSstyle and elegance to yourbikematch our other billet enginecomponentsand spring to provide bestpossible sealingincludedA03548 For Twin Cam inRadius chromeNESS-TECH OVAL & TEARDROP CAM COVERDesigned for all Big Twin Models 1973-1999Accept all performance ignitions including Crane andDyna as well as stockCam cover includes cam and pinion bushings, Jamesgasket and seal and all necessary installation hardwareNESS-TECH® OILPRESSURE SWITCHCOVER FOR TWIN CAMscrewA03070 Switch CoverRadius SmoothChrome Chrome1993-1999 1973-1992A03951 A03950NESS-TECH AIRCLEANER INSERTSThese air cleaner insertsmount directly over thefactory tin cover andare available in followingmodels.Fits all Twin Cam modelsA03697 Air Cleaner Insert, groovedA03698 Air Cleaner Insert, smoothNESS-TECH® BILLET LIFTER BLOCKS FOR TWIN CAMMODELSRadius design enhances appearanceReplaces factory die-cast partsIncluded chrome hardwareSold in pairsA12577 ChromeNESS ABSPAINTABLEAIR CLEANERCOVERSin Team Ness“Big Sucker”Stage I kitABS plastic cover is ready to be painted to match thecolor of your machineAvailable in Diamond styleS&S Super E or G Diamond A1809326-039

BIG SHOT ADJUSTABLE FUELINJECTION TUNERThe Big Shot Adjustable Fuel InjectionTuner is a new load-based fuel injectionmodule that does not require anysplicing or modifications to yourmotorcycle during installation. Big Shotmodules come pre-loaded with basemaps for different models which canthen be fine tuned for each individual’sriding style and bike with three buttons.Tuning is so easy that laptops and dynomachines are not required to maximizeyour motorcycle’s performance.Utilizing the latest in load-basedtechnology in fuel injection performance,the Big Shot detects the exact amountof load on the engine at any RPM andany road speed and delivers the perfectamount of fuel to the engine for optimumperformance. This is a superior designover fuel injection modules that work offof throttle position. As throttle positionscan be the same at different speeds andwith different loads on the engine, withthe same amount of fuel injected intothe engine in these varying conditions,performance can suffer. The Big Shot isavailable for the following models:A18609 2007-up XL models NEWA18600 1995-2005 FI Big-TwinmodelsA18602 2006 FI Softail, FLH and FLTmodelsA18604 2006 Dyna modelsA18610 2007-up Softail, 2007 upDyna, 2007 FLH and FLTmodels NEWA18620 2008-up FLT models NEWA18606 2002-2007 V-Rod modelsA18621 2008-up V-Rod models NEWNESS-TECH® VELOCITY STACK KITAdd that radical look to your enginewith these velocity stacks.Velocity stack brackets feature ourpatented “Big Sucker” breathertechnology.Brackets made to work on stockEVO & Twin Cam Engines withCV carburetor, S&S 96 thru 107”engines with S&S Super E-carburetor,S&S 111”-124” engines with S&SSuper G carburetorFour styles to choose from: 2”Smooth Stack, 2” Battistini Stack,90° StackAll carved from billet aluminum andthen beautifully chrome plated.Style Application ZPNA 2” Smooth Velocity Evo & Twin Cam with CV carb. A18481Stack Kit96” thru 107” S&S with Super E carb. A18480111” thru124” S&S with Super G carb A18485B 2” Battistini Velocity Evo & Twin Cam with CV carb. A18482Stack Kit 96” thru 107” S&S with Super E carb A18486111” thru124” S&S with Super G carb A18487C 90° Velocity Stack Kit Evo & Twin Cam with CV carb. A1848396” thru 107” S&S with Super E carb. A18484111” thru124” S&S with Super G carb A18478D 90° Air Filter Kit Evo & Twin Cam with CV carb. A1848896” thru 107” S&S with Super E carb. A18489111” thru124” S&S with Super G carb A18479ABCD26-040

PRE-FILTER FOR NESS VELOCITY STACK KITSPre-filters keep water and debris out while still allowingyour engine to breatheAvailable for Ness 2” velocity stacks, Ness 90 Velocitystack and the Ness 90 air filter kitIndividually soldA18470 90 Velocity Stack Pre-Filter, BlackA18471 2” Velocity Stack Pre-Filter, BlackA18474 90 Air Filter Kit Pre-Filter, BlackNESS-TECH® S&S CHOKE KNOBKeep choke function when adding a velocity stack to yourS&S carburetor from billet aluminumReplacement piece for choke assemblies in our velocitystack kitsNESS-TECH®BILLET HOSEAND PLUG WIRESEPARATORSDesigned to work with both 3/8” and 5/16” ID stainlesssteel hosesThe efficient and professional method of routing oil andfuel linesCNC machined from 6061-T6 billet aluminumSold in pairsChromeA08077 Radius Hose SeparatorsA08070 Grooved Hose SeparatorA05516 Grooved Plug Wire SeparatorNESS CHROMESPRING HOSECOVERdemand This was one ofthe hottest products we made back in the 1970’sChrome plated spring cover protects oil and fuel hosefrom hot surfacesLooks much better than stainless steel hose at a fractionof the priceOil hose cover is sold in 6 foot sectionsFuel hose cover is sold in 3 foot sectionsA08171 Oil hose cover, 6 footA08170 Fuel hose cover, 3 footA18460 Ness-Tech® Choke Assembly26-041

NESS-TECH® OIL PRESSURE GAUGE BRACKETASSEMBLYFeatures stainless housing and glass lens, filled withvibration dampening glycerin for lasting performanceBillet bracket mounts oil pressure gauge to the rearrocker boxFinished in chromeComplete kit includes Ness 0-60# gauge, billet bracketand cone, stainless steel hose assembly and necessarymounting hardwareTwin Cam 88 EVO Big Twin EVO Big Twin SportsterRadius Radius Grooved 1993-upComplete Kit A15658 A15657 A15650 A15659Complete Kit A15660 A15662 A15651 A15661(W/O Gauge)Replacement hose A15649 A15653 A15653 A15646Replacement A15655 A15655 A15655 A15655gauge (Ness 1 1/2”)26-042

TEAM NESS “BIG SUCKER” AIR CLEANER KITSThe best and simplest performance air cleaner kits forSportster, Big-Twin and Twin Cam...Period!All-in-one backing plate features a built-in carburatorsupport, built-in breather tunnels at each head todecrease crankcase pressure. Each tunnel exits at themouth of the carburetor to create a virtually closed loopsystem.Breather features o-ring banjo bolt seals and a radiusedintake manifold, no oil hoses, no oil fittings, no leakingand no baloney!All kits include a “Big Sucker” aluminum backing plate,Team Ness High-Flow air filter, Chrome breather bolts,simple instructions and all necessary hardware.Stage I Kits for Big Twin and Twin Cam feature a TeamNess High-Flow filter that accepts all 1993 to present ovalor round OEM outer covers.Stage I Kits for Sportster also feature a Team NessHigh-Flow filter and require a 8” round Ness outer coverZPN A18496 or A18497, or a Ness Sucker billet outercover.Stage II Kits feature a 20% larger Team Ness High-Flow filter that requires a 8” round Ness outer coverZPN A18496 or A18497, or 8” round chrome coverZPN 121183.Note: When installing on 2007 and later models the AirIntake Sensor must be removed. We suggest you to use aZPN 702022 intake override module to avoid that thisA18502Fits 1993 thru 1999 Evolution Big Twin, except FuelInjected 1995 thru 1998 FLH & FLT series modelsDie-cast Die-CastSatin ChromeA18500 A18499 Stage IA18501 A18502 Stage IIFits 1999 thru 2001 Fuel Injected FLH & FLT seriesmodels (Oval inlet)Die-cast Die-CastSatin ChromeA18498 A18503 Stage IA18493 A18504 Stage IIA18507A18501Fits 1988 to present Sportster models, install with a8” round Ness outer cover ZPN A18496 or A18497,or a Ness Sucker billet outer coverDie-cast Die-CastSatin ChromeA18803 N/A Stage IA18804 N/A Stage IIA18496/A18497NEWOptional chrome aircleaner coversKeeps your filter coveredA18496 Smooth design,die-cast, chrome finishA18497 Grooved design,die-cast, chrome finish121183 Chrome steelcoverFits 1999 to present Dyna Twin Cam, 2000 topresent Softail Twin Cam, 1999 thru 2007 carburetorequipped FLH & FLT series models and 2002 thru2007 Fuel Injected FLH & FLT series modelsDie-cast Die-CastSatin ChromeA18505 A18507 Stage IA18506 A18508 Stage IIFits 2008 to present FLH & FLT series modelsDie-cast Die-CastSatin ChromeA18510 A18512 Stage I NEWA18511 A18513 Stage II NEWReplacement filter elementsA18098 Stage I, does not fit Stage I Suckers for 1999thru 2001 Fuel Injected FLH & FLTA18097 Fits Stage I Suckers for 1999 thru 2001 FuelInjected FLH & FLTA18099 Stage IIOptional chrome billet end coversKeeps your filter element exposedStage I Stage IIA18781 A18794 Scalloped NEWA18780 A18795 Smooth NEWN/A A18796 Grooved NEW26-043

NESS BILLET “BIG SUCKER” AIR CLEANER KITSThe best and simplest performance air cleaner kits forSportster, Big-Twin and Twin Cam...Period!All-in-one “Big Sucker” billet aluminum backing platefeatures a built-in carburetor support, built-in breathertunnels at each head to decrease crankcase pressure.Each tunnel exits at the mouth of the carburetor to createa virtually closed loop system.Breather features o-ring banjo bolt seals and a radiusedintake manifold, no oil hoses, no oil fittings, no leakingand no baloney!Available with Smooth, Scalloped or Grooved filter endcover.Stage I Kits include a chrome billet aluminum backingplate, Team Ness High-Flow air filter, chrome billet outercover, Chrome breather bolts, simple instructions and allnecessary hardware.Stage II Kits include the same as Stage I kits but feature a20% larger High-Flow filter.Note: When installing on 2007 and later models the AirIntake Sensor must be removed. We suggest you to usea ZPN 702022 intake override module to avoid that thistriggers a warning lite coming on your dash.A18792A18802Fits 1988 to present Sportster modelsSmooth Grooved ScallopedN/A N/A N/A Stage IA18806 A18805 A18807 Stage IINEW26-044A18799NEWA18791Fits 1993 thru 1999 Evolution Big Twin, except FuelInjected 1995 thru 1998 FLH & FLT series modelsSmooth Grooved ScallopedA18791 N/A A18792 Stage IA18799 A18800 A18802 Stage IIA18800Fits 1999 to present Dyna Twin Cam, 2000 topresent Softail Twin Cam, 1999 thru 2007 carburetorequipped FLH & FLT series models and 2002 thru2007 Fuel Injected FLH & FLT series modelsSmooth Grooved ScallopedA18808 N/A A18809 Stage IA18810 A18812 A18811 Stage IIFits 1999 thru 2001 Fuel Injected FLH & FLT seriesmodelsSmooth Grooved ScallopedN/A N/A N/A Stage IA18797 A18798 A18793 Stage II NEWFits 2008 to present FLH & FLT series modelsSmooth Grooved ScallopedA18813 N/A A18815 Stage I NEWA18814 A18817 A18816 Stage II NEWReplacement filter elementsA18098 Stage I, does not fit Stage I Suckers for 1999thru 2001 Fuel Injected FLH & FLTA18097 Fits Stage I Suckers for 1999 thru 2001 FuelInjected FLH & FLTA18099 Stage II

Under-cut, Slash NessStacker Ness, Side-cutSLASH NESS 2 1/4” DOUBLE WALL DRAG PIPESOriginal sweeping designs based on Arlen’s SmoothnessbikeExclusive double wall design through the length of theheader portion of the exhaust to help eliminate blueingAll of our 2 1/4” drag pipes include louvered core bafflesand appropriate mounting hardwareA05861 Slash Ness pipes, Under-cut 1986-up SoftailsA05880 Slash Ness pipes, C-cut 1986-up SoftailsA05881 Slash Ness pipes, Side-cut 1986-up SoftailsA05870 Replacement bafflesSTACKER 2 1/4” DOUBLE WALL DRAG PIPES FROMARLEN NESSExclusive double wall design through the header portionof the exhaust to help eliminate blueingEach chrome plated design includes louvered baffles andmounting hardwareAvailable for 1986-up Softail modelsA05862 Stacker pipes Side-cutA05882 Stacker pipes, C-cutA05883 Stacker pipes, E-cutSlash Ness, C-cutStacker, E-cutSlash Ness, Side-slashStacker, C-cut26-045

NESS-TECH BILLET INNER/OUTER PRIMARY SYSTEMThe ultimate billet inner/outer primary systemCurvaceous design changes the look of current primarysystemMachined from 150 pounds of billet aluminumKits include billet inner and outer primary covers, twoprimary cover gaskets, and chrome hardwareChromeA16480 Smooth Inner/Outer Primary 1989-1993 SoftailA16481 Smooth Inner/Outer Primary 1994-up SoftailNESS-TECH® BILLET BELT DRIVESThe ultimate in belt drives from Arlen NessAll the show with go to back it up, the belt drives aredesigned to put up with monster powerAll components are carved from billet aluminum andbeautifully chromedBelt drive kits include Promo drive componentsA Rivera “Pro-Clutch” in each kitA16280 Radius Belt Drive Kit, SoftailA16281 Rad II Belt Drive Kit, SoftailA16285 Radius Belt Drive Kit, DynaA16286 Rad II Belt Drive Kit, DynaA16257 Replacement 3” BeltNESS-TECH® BILLET OUTER PRIMARY COVERNew 1-piece construction outer coverCarved from 6061-T6 billet aluminumFits 1989-up Softail models; 1990-up Dyna modelsBeautifully chrome platedA16125 Rad II outer primary cover, 1994-up modelsA16126 Rad II outer primary cover, 1989-1993 models26-046

Radius SmoothRad IILouveredNESS-TECH® BILLET TRANSMISSION TRAP DOORFor 1987-up Big TwinMachined from 6061T6 billet aluminiumReinforced bearing support areaIncludes chrome plated billet trap door, bearings, snaprings and chrome hardwareA03825 Ness-Tech® Trap Door, chromeNESS-TECH® TRANSMISSION SIDE COVERSGreat addition to our Transmission top coversCarved out of a chunk of 6061-T6 billet aluminumAvailable for all Big Twin Models 1987-upChrome finishGaskets and hardware are all includedRadius Smooth A03898Louvered A03886Rad IIA03890NESS-TECH® TRANSMISSION TOP COVERSPerfect compliment to all of our Ness-Tech® coversAvailable for all Big Twins 1987-up (Except Dyna GlideModels)Gasket and hardware includedChrome finishRadius Smooth A03870Radius Grooved A03872Rad IIA03885NESS-TECH® STARTER END COVERBillet machined covers fit 1991-up Big TwinsRadius grooved or smooth designsChrome platedA03592 GroovedA03593 Smooth26-047

NESS-TECH® DERBY COVERSMachined from 6061-T6 billet aluminumBeautifully chrome platedChrome hardware includedUnique designs available for all 1970-up Big TwinsDerby Covers Scalloped Rad II Grooved Radius Flamed1999-up Twin Cam A03503 A03542 A03588 A03740 A035171970-1998 Big Twin A03502 A03541 A03575 A03540 A0351026-048

Rad IIScallopedFlamedFlamedScallopedLogoGroovedRadiusNESS-TECH® POINT COVERSMachined from 6061-T6 billet aluminumUnique designs available for all 1970-up modelsBeautifully chrome platedIncludes chrome plated hardwarePoint Covers Scalloped Rad II Grooved Radius Flamed Logo1999-up Twin Cam A03506 A03543 A03589 A03741 A03518 -1970-1998 Big Twin A03502 A03544 A03577 A03545 A03513 A03498NESS-TECH MASTER CYLINDER COVERSMachined from 6061-T6 billet aluminumBeautifully chrome platedSeveral designs to choose fromFront 1996-upRear 1999-upall modelsSoftail, FLTScalloped A03507 A03508Rad II A03532 A03533Radius A03522 A03523Flamed A03519 A03521Grooved A03582 N/ANESS-TECH INSPECTION COVERSMachined from 6061-T6 billet aluminumBeautifully chrome platedSeveraldesigns to choose fromInspection Covers Scalloped Rad II Grooved Radius FlamedFLT models N/A N/A A03531 N/A N/AAll Softail,FXDWG models, A03565 A03563 A03576 A03564 A035111965-19864-speed Big Twinswith forward controls26-049

NESS-TECH® BILLET HEADLIGHTAND SPOTLIGHTSLooks sleek and meanFeatures an innovative headlampretaining system that means noexposed mounting hardware to spoilthe lookDesigned for 5 3/4” and 7”applicationsAvailable with hi-tech billet or classicsteel headlight ringsWill work in most bottom mountapplicationsCNC machined 6061-T6 billetaluminumAvailable in chrome-plate finishHeadlamps are not includedNote:Optional extended mountingblocks available separately. Be sureto order the appropriate Tri-Bar orCandlepower headlampGrooved SmoothBillet ring 5 3/4” N/A A08359Billet ring 7” A08365 N/AAccessories and replacementpartsA08362 Extended headlight mountfor most factory bottommount trees, except forNess-Tech®NESS-TECH® BOTTOM MOUNTHEADLIGHT CONVERSION KIT FORV-RODComplete kit converts any V-Rod toaccept a Ness-Tech or custom stylebottom mount headlightInnovativo kit requires no drilling orfabrication to installMachined and polished from 6061-T6billet aluminum to match the factorytreesKit includes all necessary hardwareA08390 Headlight mount conversionkit for V-RodFULL CUSTOM HEADLIGHTAvailable for FXWG 1980-1986,FXST 1984-up, plus any customapplicationsComplete with 12V sealed beamAvailable in chrome-plate finish Note: Headlight does not have ahigh-beam indicator and it does notinclude a bottom mounting blockused in the custom applicationsA08125 5 3/4” Custom headlight26-050

CNC machined from billet aluminumFinished in chromeA20060 Cateye styleNESS-TECHCATEYE STYLELENS COVERUSA made cateyetaillightsNESS-TECH® BILLETHEADLIGHTArlen Nessapplicationsrings to choose fromWill work in most bottom mount applicationsCNC machined 6061-T6 billet aluminumAvailable in chrome plate finishBattistini headlight comes with paintable black ABS plasticinner sleeveHeadlamps are includedHeadlight AssembliesSmooth 5 3/4” Bullet Headlight A083445 3/4” Stretched Bullet A083455 3/4” Stretched Bullet w/Visor A083395 3/4” Battistini A08351Accessories and replacement partsA08362 Extended headlight mount for bottom treesapplications (except Ness-Tech®)NESS-TECH® RADIUS SPOTLIGHT BARSCurvaceous flowing designs100% chrome plated billet aluminumAccept Ness-Tech, Headwinds or factory spotlightsSpotlights sold separatelyLEDRoad King, FLHTCU A1250526-051

NESS-TECH® 4 1/2” SPEEDING BULLETSPOTLIGHTSLong, lean and mean!Billet chromed beauties make the ultimate statement foryour Ness-Tech, Headwinds or factory light barStretched design is approximately 4” longer than thefactory unitsAvailable in smooth or grooved designsSpotlights are sold each and do not include a seal beam Note: When using windshields or fairings, order aspotlight extension bracket (A08356) for additionalclearanceA08354 SmoothA08355 GroovedA08356 Spotlight extension bracket, pairNESS-TECH® BILLET SLIM-LINE CATEYE TAILLIGHTNow available in super bright LED bulbs, or traditionalfuse style bulb assemblyThese are the leanest and meanest tail lights aroundPerfect for use with any of our light/license brackets, orin our stand alone style with our billet mounting blockMeasures a trim 1” thickHas same-bolt on pattern as the standard Cateye on themarketFeatures built-in license light and grooves machined intothe top and bottom for a slick appearance from any angleCNC machined from 6061-T6 billet aluminum andchromedLED upgrade available for fuse style Ness-Tech® cateyelight is available separatelyTaillightw/mounting blockslots STDAngled A20522Horizontal A20523Replacement partsA20512 Lens kit includes lenses for 1 lightA20535 LED upgrade kit, cateye horizontalNESS JET-EYE LED TAILLIGHT & TURNSIGNALASSEMBLIESNew stretched Cateye shapeSuper bright LED bulbsChrome plated die-cast housingAvailable individually or in kit formA12272 Jet-Eye taillight, turn signals and backing plateA12270 Jet-Eye turn signals only (pair)A12398 Replacement Jet-Eye taillight LED boardA12399 Replacement Jet-Eye turn signal LED board (pair)26-052

NESS-TECH® CUSTOM REPLACEMENT TAILLIGHTASSEMBLYDesigned to fit all stock model fenders 1973-1998 orcustom rear fendersMake a bold billet statement when you leave’em behindAvailable in chromeCheck out our Legacy turn signal bar speciallymachined to fit these tail lights Note: Order stock style for stock Harley-Davidson stylefenders, custom style for use with all other fendersLED upgrade available for fuse style Ness-Tech® Cateyelight is available separatelyStock CustomLED LEDHorizontal A20548 A20558Replacement partsA20531 Lens set, for one tail lightA20565 LED upgrade kit, custom horizontalNESS-TECH® 45° MINI FENDER LIGHTSDesigned to mount on any flat surface such as the side ofthe fender or fender railMeasures a thin 5/8” thickCNC machined form 6061-T6 billet aluminumAvailable with standard bulb or L.E.D.’sSold in pairsL.E.D.ChromeA12380 45° light, redReplacement partsA12182 Single filament bulb, eachA12180 Oval lens, amber, eachA12181 Oval lens, red, eachNESS-TECH® UNIVERSAL MINI MARKER LIGHTSUsed as front or rear applicationsCNC machined from 6061-T6 billet aluminumSold in pairsL.E.D.ChromeA12386 Amber lensA12385 Red lensReplacement partsA12180 Amber oval lens, eachA12181 Red oval lens, eachA12182 Single filament bulbNote: Mini light indicators must be used with Load EqualizerZPN 237331 or ZPN 238331, see chapter 4.26-053

VERTICAL AND HORIZONTAL LED LIGHT ANDLICENSE SIDE MOUNT KITSGreat combination of light and license accessories fromPaul Yaffe and Arlen NessAll components are machined from 6061-T6 billetaluminumAll kits include a super-bright LED taillight, license backingplate, license frame and necessary hardwareAll support brackets must be purchased separatelyLight and license assemblies without support bracketA12140 STBC Side mountA12156 Vertical Assembly with Diamond Eye LED taillightA12157 Vertical Assembly with Ness-Tech LED duallytaillightsA12158 Horizontal Assembly with LED Diamond eyetaillightA12159 Horizontal fender mount assembly with LEDDiamond eye taillight (No support bracketnecessary)NESS-TECH® JET-EYE AND RAD II SIDE MOUNT &FENDER MOUNT LIGHT AND LICENSE KITSUnique Ness designs carved from 6061-T6 billetaluminum.Available in side mount or fender mount applicationsLight and license kits include LED taillight, backing plateand license frameSide mount kits require a separate mounting bracket kitFender mount style kits include everything necessary tomount to your custom fenderLight and License AssembliesA12255 Jet-eye side mount assemblyA12126 Jet-eye fender mount assemblySupport Bracket VerticalA12161* Axle mount for SoftailA12166 Universal 1 1/8” tube mountA12162 Lower shock mount*Requires Dyna rear axle OEM 41114-90A12256 Rad II vertical side mount assemblyA12257 Rad II horizontal side mount assemblyA12258 Rad II vertical fender mount assemblyA12259 Rad II horizontal fender mount assemblySide Mount Support BracketsA12260 Softail axle mountA12261 Softail 1” axle mountA12263 Y2K Dyna swingarm mountA12264 Y2K Softail swingarm mount26-054

ALTERNATIVESPEEDINGBULLET MARKERLIGHTSdesigngrooved designSingle or dual filamentIncludes both amber and red lensBeautifully chrome plated die-cast constructionSold eachA12700 Smooth single filamentA12701 Smooth dual filamentA12702 Grooved single filamentA12703 Grooved dual filamentA12710 Replacement bulbEach kit includes red and amber lensSold in pairsA12345 Flush mount marker lightsALTERNATIVEFLUSH MOUNTMARKER LIGHTScast priceflat surfaceNESS-TECH®BEND DOWNLIGHT/LICENSEBACKING PLATEAccepts 7 1/4” x 4 1/4” platesAccepts Cateye taillight (not included)Bent over 30 ° to make the tail light more visible on shortfender applicationsIncludes mounting block and necessary hardware Note: Matching license frames are also availableseparatelyPolishA12137 Backing plate kit (bent)NESS-TECH®LICENSEFRAMESA12078 These billet license frames accept 7 1/4” x 4 1/4”plates is used in most states.NESS-TECH® LICENSE FRAME WITH LIGHTSFits 7 1/4”x 4 1/4” platesLenses are mounted at 45 degrees for improved visibilityfrom side to rearCNC machined from 6061-T6 billet aluminumAvailable in chrome finish Note: These lights are not DOT approvedAmber RedN/A A12177 Standard frameA12180 A12181 Replacement Lens, eachA12182 N/A Replacement bulb, each26-055

ALTERNATIVE LICENSE ACCESSORIESLicense frames feature hidden mounting hardware andmay be used individually or with our custom laydownbacking plateRadius design blends the license frame and backing platetogether as one unitLaydown backing plates mount directly to all factoryfenders 1974-up (except fatbob)Available with stepped or grooved designChrome plated die-cast constructionBillet look with an attractive die-cast priceAll mounting hardware includedNESS-TECH® RADIUS LICENSE FRAMES ANDBACKING PLATESCurved lines look great with today’s style in bikesFeatures the famous Ness grooves with no exposedmounting hardwareEdges are radiused and accent the round shapeBacking plate and mounting block have been machined tocomplete the lookCNC machined from 6061-T6 billet aluminumFinished in chromeFull radius frames work best with the matching backingplate, but will work for most any license plate installationEach part sold individuallyA12550 Stepped license frameA12150 Radius GroovedA12551 Stepped license backing plateA12151 Radius Backing plateA12552 Grooved license frameA12152 Radius bent light and backing plate26-056