international civil aviation organization south american ... - ICAO
international civil aviation organization south american ... - ICAO
international civil aviation organization south american ... - ICAO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- 6 -<br />
3.2 The primary network of the new digital network should be the satellite network, in view<br />
of the high availability of a satellite-based network, as shown by the existing digital network in the SAM<br />
Region (REDDIG) in the last ten years.<br />
3.3 The ground network should encompass all the States of the Region. According to the<br />
information presented by the communication service providers, there were some States in the Region<br />
where the provider had no operations and therefore the regional communication service provider had to<br />
coordinate with other communication service providers in order to provide coverage to those countries,<br />
thus possibly increasing the cost of services in such locations.<br />
3.4 Since SAM States had approved the mixed (satellite + ground) network solution for the<br />
new digital network in the SAM Region, the technical specifications would be prepared taking into<br />
account the adopted solution. The implementation of a network would depend on the cost involved in<br />
this solution. The decision would be made at the Twelfth Meeting of Civil Aviation Authorities of the<br />
South American Region (RAAC/12) (Lima, Peru, 3-6 October 2011).<br />
3.5 The technical specifications to be drafted should not take into account the technical<br />
requirements of the new network but rather the performance parameters, such as availability, safety,<br />
integrity, reliability, robustness, management capacity, and life of network equipment.<br />
3.6 Furthermore, to ensure network availability, the technical specifications should include<br />
the necessary spare parts and training for the personnel that will be responsible for maintaining the new<br />
network.<br />
3.7 Consideration was given to the possibility of reusing some pieces of equipment of the<br />
existing network, such as the amplifiers and the antennas. In this sense, the companies participating in the<br />
bidding process should make site visits to confirm such possibility.<br />
3.8 Likewise, it was also felt that the technical specifications should include the requirement<br />
for installing the new network in a way that ensured service continuity. One such requirement would be<br />
the need to have additional bandwidth.<br />
- - - - - -