Operating Instructions No. 705-2 USA
Operating Instructions No. 705-2 USA
Operating Instructions No. 705-2 USA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Schieberohr (1) an Schwadtuchhalter (2) vormontieren<br />
• vormontierten Schwadtuchhalter in Schutzbügel (3)<br />
schieben und mit Stellschraube (4) sichern.<br />
3<br />
4<br />
1<br />
M10x50<br />
2<br />
M10x25<br />
KS200025<br />
• Bolzen (1) zwischen die Halterung des<br />
Schwadtuchhalters legen und mit Schraube (M10x50)<br />
fixieren.<br />
• Schwadtuch und Stahlband mit den Schrauben<br />
(M6x20) an dem Schwadtuchhalter montieren.<br />
1<br />
M6x20 M6x20 M6x20 M6x20 M6x20<br />
KS200026<br />
• Use a solvent to remove the rust preventing agent from<br />
the collar.<br />
Observe the safety instructions of the<br />
solvent manufacturer.<br />
Remove the solvent from the drive shaft and lubricate<br />
the shaft using lubricating grease.<br />
KS200027<br />
• Fit tine arms in working position and secure using linch<br />
pins.<br />
1<br />
Attentively read the operator's manual<br />
before operating the machine. It is<br />
essential to observe all safety<br />
instructions given in the manual.<br />
KS200028<br />
34