Reference Tape and reel information - Panasonic
Reference Tape and reel information - Panasonic
Reference Tape and reel information - Panasonic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Reference</strong><br />
1. Taping quantity<br />
<strong>Tape</strong> <strong>and</strong> <strong>reel</strong><br />
<strong>information</strong><br />
SSSMini2-F4-B<br />
Total pages page<br />
2 1<br />
The st<strong>and</strong>ard quantity shall be 10000 pcs / <strong>reel</strong>.<br />
2. Taping form <strong>and</strong> dimensions<br />
Unit:mm<br />
P0<br />
P2<br />
D0<br />
t1<br />
A1<br />
W1<br />
B1<br />
F E<br />
B0<br />
φ0.5<br />
W<br />
K<br />
A0<br />
P1<br />
K1<br />
2. 1.<br />
t2<br />
1. Carrier tape<br />
2. Cover tape<br />
Item<br />
Symbol Dimensions<br />
Remarks<br />
A0 0.68+0.05/-0.03<br />
Length<br />
A1 0.37±0.05<br />
Dented square<br />
B0 1.08±0.05<br />
hole for product Width<br />
B1 1.62±0.05<br />
insertion<br />
Depth<br />
K 0.62±0.05<br />
Pitch<br />
P1 2.00±0.05 Accumulated error ±0.2max/10 pitches<br />
Diameter<br />
D0 1.55±0.05<br />
Sprocket hole Pitch<br />
P0 4.00±0.06 Accumulated error ±0.2max/10 pitches<br />
Position E 1.75±0.10<br />
Center-to-center Longitudinal P2 2.00±0.05<br />
distance<br />
Traverse F 3.50±0.05<br />
Cover tape Width W1 5.4±0.1<br />
Carrier tape<br />
Width<br />
W 8.0±0.2<br />
Thickness<br />
t1 0.2±0.1<br />
Hole outer depth<br />
K1 0.70±0.10<br />
Total thickness<br />
t2 0.80±0.20<br />
Note : 1) Radius at each corner shall be 0.25R or less.<br />
2009.4.28 2012.6.26<br />
Established Revised<br />
<strong>Panasonic</strong> Corporation
<strong>Reference</strong><br />
3. Reel <strong>and</strong> dimensions<br />
<strong>Tape</strong> <strong>and</strong> <strong>reel</strong><br />
<strong>information</strong><br />
SSSMini2-F4-B<br />
Total pages page<br />
2 2<br />
Unit:mm<br />
C3 Labeling position<br />
EIAJ C3<br />
Surface<br />
R<br />
C<br />
N<br />
A<br />
D<br />
E<br />
Label<br />
EIAJ-RRM-<br />
W1<br />
W<br />
W1<br />
Labeling position<br />
Back<br />
Item Symbol Dimensions<br />
Diameter A 180.0+0.0/-3.0<br />
Flange Thickness W1 1.2<br />
Distance between flanges W 9.0±0.3<br />
Outer diameter N 60.0+1.0/-0.0<br />
Spindle hole diameter C 13.0±0.2<br />
Hub<br />
Width E 2.0±0.5<br />
Keyway Depth D 21.0±0.8<br />
Radius at corner R 1.0<br />
Indication of the name, etc<br />
To be printed on one side of flange.<br />
Name, Quantity, Serial No, etc. to be shown<br />
Remarks<br />
2009.4.28 2012.6.26<br />
Established<br />
Revised<br />
<strong>Panasonic</strong> Corporation