BPE-SANI MATIC-Strai..

Double Ball Tee
Custom Double Ball Tee Nomenclature
1
2
3
4
5
6
7
Selection Option Description Price
Tube
Diameter
Connection
Ball
Connection
Leg Length
Leg Length
Finish (Ra)
Finish
Option (EP)
1 2 3 4 5 6 7
DT Ra EP
0.75 0.75” $265
1.0 1.00” $265
1.5 1.50” $265
2.0 2.00” $295
SC Slip Collar (standard) $ 0
BW Butt Weld $ 0
TC Tri-Clamp $ 20
SC Slip Collar (standard) $ 20
BW Butt Weld $ 0
(enter Length in inches)
(enter Length in inches)
$ 1
per inch
$ 1
per inch
32 32 Ra/150 Grit (standard) $ 0
25 25 Ra/180 Grit $ 70
15-20 15-20 Ra/240 Grit $100
9-11 9-11 Ra/320 Grit $125
EP
Electropolish
(added to any finish)
Material Certification is available for an additional $50 per order.
Please ask your sales representative for more information.
$120
=
Price
Tube Diameter
(selection )
Internal Length
1
Standard
Internal Length
0.75" 0.84” or 27/32”
1.0" 1.69" or 1 11/16"
1.5" 2.41" or 2 13/32"
2.0" 2.66" or 2 5/32"
2
4 5
3
SUPPLY TUBES
Single Ball Supply Tube vs. Double Ball Tee Attachment
A properly sized single spray ball with the correct spray pattern provides the necessary cleaning coverage for many tanks.
However, for tanks with baffles or agitators, a “shadowing” effect occurs within the tank. The diagrams below show how a
double ball tee attachment overcomes this problem to provide complete cleaning coverage.
Your sales associate can assist you with the proper selection.
Shadowing
This top view of a tank with baffles and agitator shows the
“shadowing” of spray due to obstructions within the tank.
Double Ball Placement
Multiple spray sources are needed to compensate for the
shadowing effect to provide complete spray coverage.
Call toll free 800.356.3300 or fax 608.222.5348
17