BPE-SANI MATIC-Strai..

ACCESSORIES
In-Tank Steam Mixer/Sparger
The purpose of a steam mixer/sparger is to effectively mix steam
with water in the tank to reduce noise and maximize the heating
capacity. Steam mixers/spargers are attached to either in-tank
piping or a coupling that is mounted through the sidewall of a tank.
Sizing is determined by the steam valve through which steam
is delivered.
Material: 316 stainless steel
Connection type: NPT threaded connection
Connection Size Part # Price
0.5" 741162 $325
0.75" 740859 $325
1.0" 741137 $325
1.25" 640842 $325
1.5" 540042 $325
Steam Regulator Valve
The steam regulator automatically controls the temperature of
your cleaning unit without the use of external power. With a vapor
pressure thermal system, the steam regulator senses temperature
change and positions the valve plug to regulate the heating or
cooling medium to maintain a desired temperature.
Material: Brass
Connections: NPTF
Connection Size Part # Price
0.5” 020494 $900
0.75” 020495 $1,000
1.0” 020506 $1,168
Thermowell for Steam Regulator Thermal Bulb (not pictured)
Material: 321 stainless steel, 10.5” long, 1.0 NPTM
Part #
Price
120002 $95
Electric Immersion Heater
Manual Thermostat, 3” Tri-Clamp,
Nema 4x Head, 50° - 250°F, 460 VAC
Connection Size Part # Price
7.5 KW 023997 $1,597
9.0 KW 029529 $1,607
12.0 KW 024296 $1,617
Additional voltages and sizes available upon request
Level Probe
The three point level probe maintains the correct solution levels
in a tank. 2” tri-clamp connection for mounting on the top of each
tank. Lumenite level controls are mounted in the control panel.
Part #
Price
220293 $237
For replacement level probes, please measure the lengths of existing model.
All probes are cut to length.
22
sanimatic.com