February 2012 Issue - Target Shooter Magazine
February 2012 Issue - Target Shooter Magazine
February 2012 Issue - Target Shooter Magazine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LATEST<br />
NEWS...<br />
Latest News...<br />
New for <strong>2012</strong> - The innovative PSE Composites E-Tac<br />
New for <strong>2012</strong> - The innovative PSE Composites<br />
E-Tac... Continued<br />
LATEST<br />
NEWS...<br />
Perfect fitting inlet moulding. Inlet area is reinforced via<br />
roving winding technique and roving cross-members. This<br />
includes the recoil lug area that is connected to the stock<br />
shell via several carbon roving bundles ensuring recoil is<br />
transferred with minimum flex directly into the stock.<br />
Innovative Composite Construction<br />
Integral carbon fibre I-beam construction along the complete length results in a stock that is ultra-stiff on both a<br />
lateral and torsional axis.<br />
Adjustable cheek is made completely from carbon<br />
fibre sandwich materials. If needed the top section<br />
can be filled with weight to reduce felt recoil. 1/2lb<br />
of weight can be added. This weight would be<br />
very close to the line of recoil. Clamp screw can be<br />
swapped to either side.<br />
The light weight of the E-tac will reduce mass below the bore line and help reduce initial muzzle flip and increase<br />
accuracy. In some cases depending on the weight of the scope or mag system, one can achieve the centre of gravity<br />
at “zero” or on centre bore line.<br />
The rounded pentagon<br />
shaped grip of the E-Tac is<br />
another innovation of PSE-<br />
Composites. The rifleman<br />
can develop a feel for his<br />
rifle through practice and<br />
will develop a subconscious<br />
coordination and orientation<br />
with this shape. (Right)<br />
Ambidextrous extra long<br />
and vertical pistol grip with a<br />
slight palm swell.<br />
Flat sides on forend<br />
can be used to mount<br />
Picatinny rails. Flats are in<br />
line with the bore.<br />
35mm (1.38”) wide no<br />
taper barrel channel.<br />
Will take the heaviest of<br />
barrels.<br />
PSE-Composites<br />
Marina House<br />
Lower O’Connell Str.<br />
Kinsale<br />
Co. Cork<br />
Ireland<br />
www.pse-composites.com<br />
psecomp@googlemail.com<br />
Tel: 00353 (0) 872363263<br />
E-Tac: standard inlet is drop in fit for Remington 700 SA BDL or<br />
similar actions. Although not always needed, we recommend to<br />
epoxy bed the action. Metal pillars are not needed as carbon fibre<br />
pillars are integrated.<br />
70 71
Change language