Aurora Shutters/Traditions Wood Shutters - DSC Window Fashions

Effective July 2011
Measuring–Divider Rails and T-Posts
MEASURING DIVIDER RAIL
Always start from the bottom point of measure to center
of the desired divider rail location. To measure frame-toframe,
measure from the bottom of the shutter frame up to
the center of the desired rail location. To measure window
opening, measure from the sill or bottom of the window
opening to the center of the desired rail location.
If there are two divider rails, measure from the bottom of
measure type up to center of first rail location then measure
from the bottom of measure type up to the center of the
second rail location.
Window Opening
Frame-to-Frame
MEASURING T-POSTS
Always start from the left point of measure type to the center
of the desired T-post location. To measure frame-to-frame,
measure from the left of the shutter frame to the center of
the desired T-post location. To measure window opening,
measure from the left inside of the window opening to the
center of the desired T-post location.
If there is more than one T-post measure from the left of
measure type to the center of first T-post location, then
measure from the left of measure type over to the center of
the second T-post location etc.
A
B
C
D
WINDOW SIZE
E
ALWAYS measure from the same point the
frame was measured. EXAMPLE: If measuring
for L-Frame, frame-to-frame measure type, A
is the outside edge of the L-Frame.
23