Aurora Shutters/Traditions Wood Shutters - DSC Window Fashions

Effective July 2011
Frameless Wood Arches
Frameless Arches: Panel Only– Templates not Required
1. Beveled louvers for maximum light control.
2. Starburst pattern – no horizontal louvers.
3. Offered three ways: perfect, eyebrow and elongated.
NOTE: Perfect arch – width must be exactly two times the
height.
4. All wood color options and composite whites are available.
5. The arch has no tilt bar; the louvers open individually.
6. Allow sufficient wall space to mount. Panel-only arches that
are:
• 20"–24" wide: top frame 2" wide, bottom frame 1" wide
• 24"–45" wide: top frame 3" wide, bottom frame 2" wide
• 45"–80" wide: top frame 3" wide, bottom frame 3" wide
• 80"–108" wide: top frame 4" wide, center support louver
(non-functioning), bottom frame 4" wide
7. Panel is 1 1 ⁄16" thick and may not match projection of other
outside mount standard shutters.
8. Order arch as frame-to-frame.
NOTE: If mounting arch inside take own deduction and
order frame-to-frame. Template recommended.
NOTE: Arches over 80" wide require a center non-operating louver
for support.
Width
Perfect Arch
Width
Eyebrow Arch
Height
Height
H1
H2
Height
Width
Elongated Arch
Frameless Arch Minimum and Maximum Sizes
Frameless - Panel Only
Perfect Arch
(Height = 50% of width)
Eyebrow
(Height = no less than 33% of
width)
Elongated Arch
(Height = no greater than 66%
of width)
Width
Height
Minimum Maximum Minimum Maximum
20" 108" 10" 54"
20" 108" 7" 54"
20" 108" 10" 71 1 ⁄4"
40