Demolition In UAE! pages: 38-40 - Pdworld.com

Here’s Ra
For some people the Finnish manufacturer Ramtec is
perhaps a completely new name. However, the company dates
back to the 1970s even if it was founded in 2002. Ramtec,
located in Lahti, Finland, was since the 1970s a development
and production section of Rammer, today Sandvik.
Will Ramtec become
a new strong Nordic
brand of demolition
and recycling attachments?
With its
determined drive, a
very modern production
plant and their
long reputation in the
market the company
has a good chance to
succeed.
The Ramtec CG series contains of
three models for carriers between
10 to 60 t.
Once a part of Sandvik/Rammer
In 2002 Ramtec became an independent company through a
management buy-out from Sandvik. Ramtec still has a close
co-operation with its previous owner and manufactures several
of the basic components of Sandvik’s demolition attachment
and breaker series.
After the management buy-out Ramtec started to develop
a line of hydraulic handling, recycling and demolition tools,
called the Robi Series. “We have invested the time necessary
to build up our own strong line of attachments, but we are
not in a hurry and we want to meet our customers’ exact
requirements. Our first new products were invented in 2003
but launched globally during 2008. They have been very well
received by the market,” says Ramtec marketing manager
Vesa Santala.
Four Robi Families
The Robi products are divided into four groups. The DGseries
has five models of demolition and sorting attachments,
the DG6r, DG8r, DG15r, DG20r and DG30r, which cover
weights from 250kg to 1.77t and suitable for carriers between
2.5 to 40t. The concrete crusher series CG contains three
models; the CG20r, CG35r and CG50r. Weights are 1.8, 2.6
and 3.5t and suited for carriers between 10 to 60t. CG35r is
completely new for the international market and was launched
at the Intermat show in Paris this spring. It has been sold on
the Finnish market though for about two years. The HG-series
are the three sorting grapples, HG10r, HG20r and HG30r
weighing 1.6, 2 and 2.6t, and developed for carriers between 10
to 60t. The last series are the Multi Master screening buckets
for screening and recycling of different types of building materials.
Multi Master is available in three different sizes, MM104,
MM154 and MM254. MM104 weighs 1.7t and has a screening
capacity of up to 1.4m 3 and screening area of 1.2 m 2 . MM154
weighs 2.3t and has a capacity of 1.9m 3 and a screening area of
1.8m 2 . The biggest unit is the MM254, weighing 2.9t. It has a
capacity of 3.2m 3 and a screening area of 2.7m 2 . The buckets
have been developed to screen and crush soil, wood, bricks and
other types of demolition waste and glass. All Robi products,
except the Multi Master buckets rotate 360°.
26 PDi • Is s u e 3 - 2009 • Au g - Se p t
Networking
Vesa Santala said that Ramtec is now focusing on building