Side-by-side comparison of ANSI/ISEA Z87.1-2003 and ... - US Safety
Side-by-side comparison of ANSI/ISEA Z87.1-2003 and ... - US Safety
Side-by-side comparison of ANSI/ISEA Z87.1-2003 and ... - US Safety
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ANSI</strong>/<strong>ISEA</strong> <strong>Z87.1</strong>-<strong>2003</strong>/2010 Comparison – page 10<br />
Criteria <strong>ANSI</strong>/<strong>ISEA</strong> <strong>Z87.1</strong>-<strong>2003</strong> <strong>ANSI</strong>/<strong>ISEA</strong> <strong>Z87.1</strong>-2010 Notes/Rationale<br />
Penetration<br />
Criteria for individual<br />
protectors. See:<br />
Section 7.3.3<br />
Section 7.4.2.1.3<br />
Section 8.2.2.3<br />
Section 8.3.1.3<br />
Section 9.2.2.3<br />
Section 9.3.1.3<br />
Section 10.2.2.2<br />
Section 10.3.1.3<br />
Section 14.2 (test method)<br />
Section 6.2.4 (criteria)<br />
Section 9.13 (test method)<br />
No change in pass/fail criteria.<br />
Assessed only for impactrated<br />
protectors.<br />
Test method section has been<br />
updated to specify that new<br />
needle must be used for each<br />
drop <strong>and</strong> specifies the<br />
diameter from the center <strong>of</strong><br />
the eye drop zone.