AC500, CP400, CP600, DigiVis 500, Wireless Catalog - Gerrie Electric
AC500, CP400, CP600, DigiVis 500, Wireless Catalog - Gerrie Electric
AC500, CP400, CP600, DigiVis 500, Wireless Catalog - Gerrie Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Scalable PLC <strong>AC<strong>500</strong></strong><br />
Overview of digital S<strong>500</strong>-eCo I/O modules<br />
Digital S<strong>500</strong>-eCo I/O modules<br />
Type DI561 DI562 DI571 DO561<br />
Version available for Extreme Conditions No<br />
Number of Channels per Module<br />
Digital Inputs 8 16 8 (AC) –<br />
Digital Outputs – – – 8<br />
Configurable as Input or Output DC – – – –<br />
Relays (R) / Transistor (T) – – – T<br />
Additional configuration of channels as:<br />
Fast Counter<br />
No<br />
Digital inputs<br />
Input signal voltage 24 V DC 24 V DC 110-240 V AC –<br />
Input time delay Typically 4...8 ms Typically 15 ms / 30 ms –<br />
Input current per channel<br />
At Input voltage +24 V DC Typically 5 mA – –<br />
+5 V DC < 1 mA – –<br />
+15 V DC > 2.5 mA – –<br />
+30 V DC < 6.5 mA – –<br />
40 V AC – < 3 mA –<br />
159 V AC – > 6 mA –<br />
Output current<br />
Nominal current per channel – – – 0.5 A at UP=24 V<br />
Maximum (total current of all channels) – – – 4 A<br />
Residual current at signal state 0 – – – < 0.5 mA<br />
Demagnetization when switching off inductive – – – Must be provided externally<br />
loads<br />
Switching frequency<br />
For inductive load – – – Max. 0.5 Hz<br />
For lamp load – – – Max. 11 Hz at max. 5 W<br />
Short circuit / overload proofness – – – No<br />
Overload indication (I > 0.7 A) – – – No<br />
Output current limiting – – – No<br />
Proofness against reverse feeding of 24 V – – – No<br />
signals<br />
Contact rating<br />
For resistive load, max. – – – –<br />
For inductive load, max. – – – –<br />
For lamp load – – – –<br />
Lifetime (switching cycles)<br />
Mechanical lifetime – – – –<br />
Lifetime under load – – – –<br />
Spark suppression for inductive AC load – – – –<br />
Demagnetization for inductive DC load – – – –<br />
Maximum cable length for connected process signals<br />
Shielded cable m <strong>500</strong> <strong>500</strong> <strong>500</strong> <strong>500</strong><br />
Unshielded cable m 300 300 300 150<br />
Potential isolation<br />
Per module • • • •<br />
Between the input channels – per group of 8 • –<br />
Between the output channels – – – per group of 8<br />
Voltage supply for the module Internal via I/O bus Internal via I/O bus Internal via I/O bus Internal via I/O bus<br />
Fieldbus connection<br />
CI501-PNIO, CI502-PNIO, CI504-PNIO, CI506-PNIO, CI541-DP, CI542-DP, CI581-CN, CI582-CN DC551-CS31, CI592-CS31<br />
Address setting<br />
Automatically (internal)<br />
ABB Automation products | 21
Change language