Technical data [PDF 155 KB]

Measurement technology | METPOINT ®
METPOINT ® FLM
Scope of supply
››
Data display DD109 incl.
››
Data logger for 1 million measured values
››
Sensor FS109, 185 m/s, 220 mm insertion depth
››
Connecting cable ca. 5 m
For METPOINT ® FLM
Stationary Volume flow measuring
Technical Data Display DD109
Dimensions (mm)
Operating temperature
Power supply
Sensor inputs
Keyboard
Display
Alarm output
Analogue output
Integrated data logger
118 x 115 x 93 (width | height | depth)
0 … +50°C
100 .… 240 VAC / 50-60 Hz / 10 VA
2 inputs for dew point and consumption probes
(optional 2 analogue inputs)
4 buttons
Graphic display, 160 x 100 Pixel
2 relays, 230 VAC, 3A, potential-free, changer
Connetion of the 4...20 mA signals of the dew point
and consumption sensors (max. load < 500 Ohm)
up to 1,000,000 values
Technical Data Flow sensor FS109
Dimensions (mm)
220 mm insertion depth
Operating temperature
Power supply
Measuring principle
Measuring medium
Air moisture of the
measuring medium
Operating pressure
Material sensor tube
and screw joint
Analogue output
Pulse output
62 x 415 x 74,5 (width | height | depth)
–30 ... +140 °C sensor tube, –30 ... +80 °C housing
12 bis 30 VDC, Versorgung über das optionale
Steckernetzteil oder das DD 109
Calorimetric measurement
Air, gases
Max. 90 % r.h. (no water drops)
Up to 50 bar [g]
Stainless steel 1,4301
4 ... 20 mA (load < 500 Ohm), accuracy 0.06 mA
1 pulse per m3, active signal max. current l = 10 mA
Flow Sensor FS109 variants
For METPOINT ® FLM Insertion depth 120 mm * Insertion depth 160 mm * Insertion depth 220 mm * Insertion depth 300 mm * Insertion depth 400 mm *
* Connecting cable not included in the scope of delivery
131

Measurement technology | METPOINT ®
METPOINT ® FLM compact
Technical Data Flow sensor FS 109
Sensor
Pt45, Pt1000
Operating temperature 0 … +50 °C
Air moisture of the
measuring medium
Operating pressure
Measuring unit/
measuring section
Power supply
Power input
Analogue output
Pulse output
Accuracy
Max. 90% r.h. (no water drops)
Up to 16 bar [g]
Material: stainless steel 1,4301
12 to 30 VDC, supply via the optional AC adapter
or the DD 109
Max. 80 mA at 24 VDC
4... 20 mA (load < 500 Ohm), accuracy 0.06 mA
1pulse per m3 or per l, pulse output potential-free,
switching performance max. 30 VDC, 20 mA
± 1,5% v.M. ± 0,05% v.E.
Volume flow Sensor FS211 Variants
62 74,5
H1
H
A
SW 36
A
R
R
L1
L
Measuring section DN 8 ¼" DN15 ¼" DN20 ¼" DN25 1" DN32 1½" DN40 1¼" DN50 2"
Measuring range 0.8 ... 90 l/min 0.2 ... 90 m³/min 0.3 ... 170 m³/min 0.5 ... 290 m³/min 0.7 ... 480 m³/min 1 ... 550 m³/min 2 ... 900 m³/min
PN (bar [g]) 16 16 16 16 16 16 16
AD/ID (mm) 13.7/8.5 21.3/16.1 26.9/21.7 33.7/27.3 42.4/36.0 48.3/41.9 60.3/53.1
L (mm) 194 300 475 475 475 475 475
L1 (mm) 137 210 275 275 275 275 275
H (mm) 176 176,4 179.2 182.6 186.9 189.9 195.9
H1 (mm) 165.7 165.7 165.7 165.7 165.7 165.7 165.7
A (mm) 15 20 20 25 25 25 30
135