How to Set Up DynDNS Settings - Agasio POE & Wireless IP Cameras

More documents

Recommendations

Info

Figure 7 – As seen above, cancelling your trial has no effect on the first host name you register, thus allowing you to use this host name for free for your cameras. Foscam Digital Technologies LLC support@foscam.us
You have now successfully obtained a DDNS address which you can use within the camera. See Figure 8 for additional reference on how to set up the DDNS hostname you have created to work with the camera. Figure 8 – The username and password in the account we created is entered here, along with the hostname we registered. All that needs to be done is to push “Submit.” Once you have entered the information in the service settings and pushed “Submit,” you should be able to access your camera using the provided host name. In this example, instead of using the external IP address of the camera, we would just use our hostname and type it into the URL bar as follows: “foscam.dyndns.org:8080” Note: Remember that you always have to enter your port number with a colon at the end of the URL if you are not using port 80. Since we are using port 8080, we would have to add “:8080” at the end of the hostname URL. Foscam Digital Technologies LLC support@foscam.us
Page 1 and 2: Foscam Digital Technologies LLC How
Page 3 and 4: Figure 2 - Choose your hostname and
Page 5 and 6: Enter a Username and Password you w
Page 7: Figure 6 - The screens above indica

How to Set Up DynDNS Settings - Agasio POE & Wireless IP Cameras

Create successful ePaper yourself

Delete template?

Save as template?