COMSOL Multiphysics (formerly FEMLAB) is a finite element ...

More documents

Recommendations

Info

For the boundary 3, the temperature is 300 K. Finally, the temperature in the boundary 4 is 300 K.
13. After clicking OK, we are now ready to run the model. To do so, we must click on the icon on the top of the screen and the model will be solved. The results are displayed as shown below. To view the temperature in each point we must click on any point inside the subdomain and the value will be displayed at the bottom of the screen. Postprocessing The menu Postprocessing will facilitate us to analyze the information in different ways. Thus, if we want to display the variation of the temperature in a 3D plot instead of a 2D one we can click the menu Postprocessing and then the option Plot parameters (or just simply pressing the key F12). The following window will be shown.
Page 1 and 2: COMSOL (FEMLAB) TUTORIAL COMSOL Mul
Page 3 and 4: 3. Next, we need to provide informa
Page 5 and 6: 9. Likewise, let us change the name
Page 7 and 8: 10. The next step is to specify the
Page 9 and 10: 11. Next, we must click on the menu
Page 11: indicate this we select the option
Page 15 and 16: Another possibility is to obtain a
Page 17: After clicking OK and running the m

COMSOL Multiphysics (formerly FEMLAB) is a finite element ...

Create successful ePaper yourself

Delete template?

Save as template?