water heating - Advanced Water
water heating - Advanced Water
water heating - Advanced Water
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
April 2008<br />
Cl/SFB (54)<br />
www.dimplex.co.uk<br />
<strong>water</strong> <strong>heating</strong><br />
The complete answer to <strong>water</strong> <strong>heating</strong><br />
including solar hot <strong>water</strong>
unvented<br />
cylinders<br />
The SCx range<br />
The new Dimplex SCx cylinders supply all<br />
the hot <strong>water</strong> required for the modern<br />
home, providing rapid fill baths and<br />
invigorating showers to en-suite bathrooms<br />
and other domestic appliances at the same<br />
time.<br />
For the User<br />
SCx in standard dove grey with<br />
optional immersion cover<br />
SCx in brushed stainless steel<br />
(special order)<br />
• Mains pressure hot <strong>water</strong><br />
• Fast filling baths<br />
• Powerful invigorating showers<br />
• Simultaneous supply of <strong>water</strong> to all<br />
bathrooms<br />
• No cold <strong>water</strong> storage tank required,<br />
freeing up valuable living space<br />
• Long life low maintenance hot <strong>water</strong> supply<br />
• Backed by a big name in domestic <strong>heating</strong><br />
• Option of a brushed stainless steel outer case<br />
For the Installer<br />
• Duplex steel inner cylinder with 25 years<br />
guarantee<br />
• Internal expansion for quick easy installation<br />
• Tough plastic leather grain external coating<br />
resists scratching<br />
• 60mm no anode – reduces service<br />
requirements<br />
• CFC free foam injected insulation<br />
• 3kW incoloy 825 immersion(s) for<br />
longer life<br />
• Light-weight for easy handling to site<br />
• <strong>Water</strong> inlet diffuser prevents cold and hot<br />
<strong>water</strong> mixing<br />
4<br />
SCx cylinder range
technical specifications<br />
Immersions<br />
3kW @240V 50Hz (permanent connection to<br />
supply through a double pole linked isolated<br />
switch with minimum breaking capacity of 13A).<br />
Outer Casing<br />
Dove Grey leather grain plastic coated steel.<br />
Option of a brushed stainless steel outer case,<br />
please contact us for further details.<br />
Insulation<br />
CFC free 60mm ODP zero fire retardant.<br />
<strong>Water</strong> Supply<br />
1.5bar 15 litres per minute minimum,<br />
16bar maximum.<br />
Inner Cylinder<br />
Duplex stainless steel.<br />
Pressure Tests<br />
All tested to 15bar.<br />
Primary Coil<br />
22mm stainless steel pipe.<br />
Hot <strong>Water</strong> Outlet<br />
22mm stainless steel pipe.<br />
Thermostat<br />
Direct units<br />
– Integral immersion thermostat and cut-out.<br />
Indirect units<br />
– External dual thermostat and cut-out.<br />
T&P<br />
Factory fitted 7bar 90°C.<br />
Safety kit<br />
Pressure reducing valve, expansion relief valve;<br />
tundish; motorised valve (indirect only) supplied.<br />
Expansion<br />
Internal air gap<br />
– no additional expansion vessel required.<br />
Approvals<br />
WRAS; BBA.<br />
Guarantee<br />
25 years for inner cylinder; 2 years on immersion<br />
(excluding affects of limescale) and 5 years on<br />
other components.<br />
GWP (Global Warming Potential) 1.<br />
Inlet Diffuser<br />
Unvented Cylinder Requirements<br />
`Property Indirect Direct<br />
1 bed / 1 shower SCx80i SCx130d<br />
2 bed / 1 bath & 1 shower SCx130i SCx150d<br />
3 bed / 1 bath & 2 shower SCx150i SCx175d<br />
4 bed / 1 bath & 3 shower SCx175i SCx215d<br />
4 bed / 1 bath & 3 shower SCx215i SCx255d<br />
5 bed / 2 bath & 2 shower SCx255i SCx305d<br />
6 bed / 2 bath & 3 shower SCx305i SCx305d<br />
Figures are provided as a guide, usage and space<br />
restrictions may dictate alternative size cylinders.<br />
Weight (Kg)<br />
Capacity Direct Direct Indirect Indirect<br />
empty Full Empty Full<br />
80L 27 142 29 143<br />
130L 30 185 32 187<br />
150L 32 207 35 210<br />
175L 37 237 40 240<br />
215L 43 258 48 264<br />
255L 50 305 55 311<br />
305L 59 364 65 370<br />
Coil Size (Indirect Only)<br />
SCx80i<br />
7kW<br />
SCx130i / SCx150i<br />
14kW<br />
SCx175i / SCx215i<br />
17kW<br />
SCx255i / SCx305i<br />
17kW<br />
SCx cylinder range<br />
5
SCx technical specifications contd<br />
Overall Height (A)<br />
Cylinder Height (B)<br />
Lower Immersion (C)<br />
Bottom Coil (D)<br />
Top Coil (E)<br />
T&P Valve (F)<br />
Dimensions relative to floor level<br />
Performance<br />
Product Capacity Cylinder Overall Cylinder Immersions Lower Top Bottom Top T&P Cold Heat-up Reheat Heat loss<br />
(litres) Diameter height height Immersion Immersion Coil Coil Valve Inlet (mins) Time in 24hrs<br />
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mins) (kw/24hr)<br />
(A) (B) (C) (D) (E) (F)<br />
DIRECT<br />
SCx80d 80 574 681 636 1 188 N/A - - 347 230 64 53 1.12<br />
SCx130d 130 574 973 928 2 188 521 - - 618 230 115 90 1.50<br />
SCx150d 150 574 1101 1056 2 188 640 - - 737 230 138 104 1.82<br />
SCx175d 175 574 1258 1213 2 188 786 - - 883 230 167 124 2.10<br />
SCx215d 215 574 1500 1455 2 188 1011 - - 1108 230 212 153 2.59<br />
SCx255d 255 574 1768 1723 2 188 1259 - - 1356 230 263 184 2.73<br />
SCx305d 305 574 2044 1999 2 188 1516 - - 1613 230 313 220 2.88<br />
INDIRECT<br />
SCx80i 80 574 681 636 1 188 - 283 283 347 230 33 23 1.12<br />
SCx130i 130 574 973 928 1 188 - 483 558 618 230 28 21 1.50<br />
SCx150i 150 574 1101 1056 1 188 - 483 558 737 230 33 24 1.82<br />
SCx175i 175 574 1258 1213 1 188 - 683 758 883 230 27 24 2.10<br />
SCx215i 215 574 1500 1455 1 188 - 683 758 1108 230 35 30 2.59<br />
SCx255i 255 574 1768 1723 1 188 - 683 758 1356 230 42 35 2.73<br />
SCx305i 305 574 2044 1999 1 188 - 683 758 1613 230 50 42 2.88<br />
6<br />
SCx cylinder range
electric<br />
showers<br />
The aquabatix ®<br />
range<br />
The aquabatix ® electric shower range<br />
connects directly to the cold mains <strong>water</strong><br />
supply and heats the <strong>water</strong> to the<br />
temperature you desire, which means there’s<br />
no need for high volumes of stored hot<br />
<strong>water</strong>. Easy to install virtually anywhere in<br />
the home, these showers will provide an<br />
inexhaustible supply of hot <strong>water</strong>. So you can<br />
take a shower any time of the day or night<br />
without using the existing hot <strong>water</strong> supply.<br />
There are thirteen shower options across four<br />
different styles, so every showering requirement<br />
is catered for within the aquabatix range, from<br />
the simplicity of the aX 1 to the feature-rich aX 4 .<br />
Range Features<br />
• Available in power ratings from 7.5kW,<br />
which makes it easy to replace an older<br />
shower – to the ultimate performance of<br />
the 10.5kW units<br />
• Clean all chrome and white/chrome<br />
styling complements the mood of any<br />
bathroom design<br />
• Easy to operate, with large<br />
ergonomically designed dials<br />
• Shower head heights are fully adjustable<br />
and there’s a choice of up to six spray<br />
patterns<br />
• Made in a BEAB and IS09002 approved<br />
factory<br />
• Two-year manufacturer’s guarantee,<br />
extendable to three or five years<br />
• For safety’s sake, all the showers have a<br />
temperature cut-out and stabilising valve<br />
for consistent showering<br />
26<br />
aX range<br />
aX 3 all chrome
aX 1<br />
The most compact shower in the range,<br />
slim-styled with a design that offers total<br />
flexibility when deciding where to position<br />
the shower in the home.<br />
• Two plumbing entry points at the back or<br />
bottom of the unit<br />
• Available in 7.5kW or 8.5kW power<br />
ratings<br />
• Single start-stop temperature dial<br />
• Single mode handset for an all-over body<br />
spray<br />
• Three temperature settings<br />
• Multiple cable entry points<br />
• 1.25m chrome effect hose and 530mm<br />
riser rail with height adjuster in white<br />
• BEAB approved<br />
aX 2<br />
An elegant white shower with a high<br />
specification.<br />
• Three power settings<br />
• Simple on/off function<br />
• Numbered temperature dial<br />
• Available in 7.5kW or 8.5kW power<br />
rating<br />
• Single mode easy clean handset for<br />
simple in shower maintenance<br />
• Auto-reset indicator shows when the<br />
shower head needs cleaning<br />
• Detachable soap dish<br />
• 1.25m chrome effect hose and 530mm<br />
riser rail with height adjuster in white<br />
• Shower unit easily replaces the majority of<br />
existing shower units<br />
• BEAB approved<br />
aX range<br />
27
aX 3<br />
A sporty shower with an impressive array<br />
of features and benefits.<br />
• Push-button on/off control<br />
• Separate power control with three power<br />
settings<br />
• Numbered temperature dial<br />
• Available in 8.5kW, 9.5kW or 10.5kW<br />
power ratings<br />
• Choice of six spray patterns with rubclean<br />
jets for easy removal of limescale<br />
• Auto-reset indicator shows when the<br />
shower head needs cleaning<br />
• Detachable soap dish<br />
• 1.25m chrome effect hose and 530mm<br />
riser rail with height adjuster in white.<br />
• Shower unit easily replaces the majority of<br />
existing shower units<br />
• Multiple cable entry points<br />
• BEAB approved<br />
• Available in white or all chrome<br />
aX 4<br />
Our highest specification shower finished<br />
in white with a host of features for<br />
showering at its most sophisticated.<br />
• Push-button combined power selection<br />
and start control with three power settings<br />
• Push-button off control with phased<br />
shut-down<br />
• Numbered temperature dial<br />
• Available in 8.5kW, 9.5kW or 10.5kW<br />
power ratings<br />
• Choice of six spray patterns with rub-clean<br />
jets for easy removal of limescale.<br />
• Low pressure indicator light<br />
• Auto-reset indicator shows when the<br />
shower head needs cleaning<br />
• BEAB approved<br />
28<br />
aX range
technical specifications<br />
Cable size<br />
Cable size will depend on the length of the<br />
cable run. Showers up to 9.5kW require a<br />
minimum of 6mm 2 cable routed directly to the<br />
main fuse box and a 40A fuse.<br />
10.5kW showers require a minimum of 10mm 2<br />
cable and a 45A fuse.<br />
<strong>Water</strong><br />
Connects directly to the cold mains <strong>water</strong><br />
supply with minimum working pressure 15psi<br />
(1bar), at a flow rate of 8 litres per minute;<br />
maximum working pressure 150psi (10bar).<br />
All electrical installations must conform to the<br />
IEE regulations.<br />
Model Features aX 1 aX 2 aX 3 aX 4<br />
1.25m Flexible Hose • • • •<br />
Riser Rail with 530mm Height Adjustment • • • •<br />
High Temperature Safety Cut Out • • • •<br />
Flow Stabiliser Valve • • • •<br />
Power ‘On’ Indicator • • • •<br />
Rotary Power Selection • • • -<br />
Push Button Power Selection - - - •<br />
Cold, Medium and High Settings • • • •<br />
Detachable Soap Dish - • • •<br />
Numbered Temperature Dial - • • •<br />
6 Mode Rub Clean Handset - - • •<br />
Single Mode Handset • • - -<br />
Push Button Start/Stop - - • •<br />
Auto Reset Indicator - • • •<br />
Low Pressure Indicator - - - •<br />
Automatic Phased Shut Down - - - •<br />
Multipoint Pipe Entry 2 3 3 3<br />
Multipoint Cable Entry • • • •<br />
2 Year Manufacturers Guarantee • • • •<br />
Optional Extended Warranty • • • •<br />
Kilowatts Available (Rating at 240V)<br />
7.5kW • • - -<br />
8.5kW • • • •<br />
9.5kW - - • •<br />
10.5kW - - • •<br />
All Chrome<br />
Finish White/ White/ White/ White/<br />
Chrome Chrome Chrome Chrome<br />
Dimensions<br />
Height 335mm 339mm 339mm 339mm<br />
Length 190mm 218mm 218mm 218mm<br />
Depth 90mm 85mm 85mm 85mm<br />
Minimum running pressure must be obtained<br />
at 9 litres/minute for 9.5kW rated models and<br />
11 litres/minute for the 10.5kW rated models.<br />
aX range<br />
29
After Sales Service<br />
After sales service if required is absolutely no problem with<br />
Dimplex – we have a network of appointed Service Agents<br />
spread throughout the Country who are qualified and trained to<br />
repair or service any of our appliances.<br />
Bathrooms<br />
Any electrical appliances installed in a bathroom should be<br />
fitted by a competent electrician in accordance with the current<br />
I.E.E. Regulations.<br />
The Dimplex Range<br />
Dimplex offers the widest range of electric space and <strong>water</strong><br />
<strong>heating</strong> products in the world – over 400 – to meet almost any<br />
<strong>heating</strong> need. In addition to this publication, we have a wide range<br />
of brochures for both domestic and commercial applications.<br />
Choose from:<br />
Specifications<br />
Dimplex policy is one of continuous improvement; the<br />
Company therefore reserves the right to alter specifications<br />
without notice. Although every care has been taken in the<br />
Range<br />
brochure<br />
Heat Pumps<br />
brochure<br />
Commercial<br />
brochure<br />
reproduction of product finishes in this brochure, the colour<br />
photographs should be taken only as a guide. The information<br />
contained in this brochure is correct at the time of printing. You<br />
are advised to consult your Dealer before purchasing.<br />
Installation Guidance<br />
This brochure is designed to assist you with your choice of<br />
Dimplex products and it is not intended as an installation<br />
Outdoor<br />
<strong>heating</strong><br />
brochure<br />
Daytona towel<br />
rail brochure<br />
Portables<br />
brochure<br />
guide. For safety, products should only be installed by a<br />
competent person, in accordance with current regulations and<br />
the manufacturers instructions. If you require further advice<br />
concerning the installation of our products – especially where<br />
the installed dimensions may be critical, please contact our<br />
customer service department or consult your installer.<br />
Fires brochure<br />
Useful Numbers<br />
Tel: 0845 600 5111<br />
Fax: Customer Services: 01489 773053<br />
Brochure line: 01489 773063<br />
Main Reception: 01489 773050<br />
Email:<br />
Websites:<br />
customer.services@dimplex.co.uk<br />
www.dimplex.co.uk<br />
© Dimplex UK Limited<br />
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing from Dimplex UK Limited.<br />
Printed on paper from sustainable sources.<br />
Dimplex UK Limited, Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF.<br />
For Northern Ireland please contact – Glen Dimplex N.I. Limited, Unit No. 24, Seagoe Industrial Estate, Portadown,<br />
Craigavon, Co. Armagh, BT63 5TH. Telephone: 02838 337317<br />
Designed and produced by CCA Ltd, Christchurch (Bournemouth). www.cca-advertising.com<br />
D1328/0408