water heating - Advanced Water

technical specifications
Cable size
Cable size will depend on the length of the
cable run. Showers up to 9.5kW require a
minimum of 6mm 2 cable routed directly to the
main fuse box and a 40A fuse.
10.5kW showers require a minimum of 10mm 2
cable and a 45A fuse.
Water
Connects directly to the cold mains water
supply with minimum working pressure 15psi
(1bar), at a flow rate of 8 litres per minute;
maximum working pressure 150psi (10bar).
All electrical installations must conform to the
IEE regulations.
Model Features aX 1 aX 2 aX 3 aX 4
1.25m Flexible Hose • • • •
Riser Rail with 530mm Height Adjustment • • • •
High Temperature Safety Cut Out • • • •
Flow Stabiliser Valve • • • •
Power ‘On’ Indicator • • • •
Rotary Power Selection • • • -
Push Button Power Selection - - - •
Cold, Medium and High Settings • • • •
Detachable Soap Dish - • • •
Numbered Temperature Dial - • • •
6 Mode Rub Clean Handset - - • •
Single Mode Handset • • - -
Push Button Start/Stop - - • •
Auto Reset Indicator - • • •
Low Pressure Indicator - - - •
Automatic Phased Shut Down - - - •
Multipoint Pipe Entry 2 3 3 3
Multipoint Cable Entry • • • •
2 Year Manufacturers Guarantee • • • •
Optional Extended Warranty • • • •
Kilowatts Available (Rating at 240V)
7.5kW • • - -
8.5kW • • • •
9.5kW - - • •
10.5kW - - • •
All Chrome
Finish White/ White/ White/ White/
Chrome Chrome Chrome Chrome
Dimensions
Height 335mm 339mm 339mm 339mm
Length 190mm 218mm 218mm 218mm
Depth 90mm 85mm 85mm 85mm
Minimum running pressure must be obtained
at 9 litres/minute for 9.5kW rated models and
11 litres/minute for the 10.5kW rated models.
aX range
29