gantry clearance! - imes-icore GmbH

GPY 5-axis-simultaneous-milling
High-Tech-control and 7 drives provide
an excellent machine dynamic !
Especially in the field of model and mould making, everyone
is talking about 5-axis milling – production processes can be
optimized significantly
One can reach this advantages only provided the CNC-machine-system
has features like 5-axis transformation, jerk limitation
on track, online tool length compensation,
RTCP function (Rotation Tool Center Point), clamping position
correction and the perfect interaction of all those features
To be up to this, we together with technology partners further
developed our GPY machine series.
The control technology is PC based. Supporting dual core cycle
times less 1/1000 sec. are possible.
The CNC control works with G-code syntax according to
DIN 66025 plus machine related commands.
With the 4th and 5th axis, jerk free 5-axis simultaneously
machining is possible, in which the tool-tip cuts with constant
speed controlled by the function RTCP (Rotation Tool
Center Point).
To enable this feature the linear axis moving speed is tripled
compare to standard. Without angle gears the gantry construction
reaches much higher dynamic and quietness.
The complete machine geometry is spatially determined and
is known by the control. Therefore the compensation matrix
provide an accuracy of ± 0,03 mm.
The electronic hand wheel improves the operation friendliness,
spindle speed and feed rate can be adjusted infinitely.
Moreover this machine system is suitable for 3+2 machining
(milling with angled tool spindle).
Due to these features the GPY is an integrated machine
concept for many 5-axis milling applications:
FAST-PRECISE-EFFICIENT!
10