Windows Millennium for IBM Thinkpad Notebooks - Lenovo

3. Click Device Manager
4. Click [+] Infrared Devices
5. Select Infrared Communication Device and Click [Properties]
6. Click to Check Enable Infrared Device
7. If prompt, reboot the system.
If two Infrared Device do appear after upgrade, One of two Infrared
Device will be automatically disabled. Leave the default setting. The
infrared device will still function without any problem.
5.3 Red X mark in USB Serial Port with IBM USB Multiple Hub.
Models: ThinkPad 570E, I Series 1400
Issue: With IBM USB Multiple hub, Red cross mark appears on IBM USB
Serial Port (COM2) of Device Manager.
Cause: This is Windows Me or USB hub driver problem
Resolution: The device works properly, ignore this mark.
6 Communication
6.1 Limitation to Ring Central Voice after upgrading to Windows Me.
Models: ThinkPad 570
Issue: Ring Central Phone application causes a blue screen when it receives a
voice phone call, but it can be used to send and receive fax.
Resolution: Do not use Ring Central for voice. Instead, Windows Me comes with
Hyper Terminal application which can be used for voice phone call.
1. Click Start → Programs →Applications → Communication
→Hyper Terminal
2. Hyper Terminal will guide you the rest of the setup process.
If Hyper Terminal application is not listed under Communication, do
the following:
1. Click Start → Settings → Control Panel
2. Double-click Add/Remove Programs icon
3. Click “Windows Setup” tab
4. In the list of applications, select Communication and Click
[Details]
5. Click the check box next to Hyper Terminal
6. Click [OK]
7. Click [Apply] and Click [OK]
8. Hyper Terminal applications is installed.
6.2 NetBEUI connection is lost when resuming from standby or hibernation.
Models: All ThinkPad models
Issue: In the network environment using NetBEUI, the connection to a
shared computer is lost after resume from standby or hibernation.
Cause: By Windows Me design.
Resolution: Do not use Standby or Hibernation feature while connecting via
NetBEUI.