LYSOFORMIN E 15.07.10.10
LYSOFORMIN E 15.07.10.10
LYSOFORMIN E 15.07.10.10
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
·<br />
·<br />
Safety data sheet<br />
according to 1907/2006/EG<br />
Page: 2/7<br />
Printed on: 15 th July 2010 Version :4 Revised on: 15 th July 2010<br />
Trade name: <strong>LYSOFORMIN</strong><br />
CAS: 111-30-8 Glutaral 1,8%<br />
EINECS: 203-856-5 T, C, N; R 23/25-34-42/43-50<br />
CAS: 64-17-5 Ethanol ≤ 5%<br />
EINECS: 200-578-6 F; R 11<br />
Regulation (EC) No. 648/2004 on detergents / information on the ingredients<br />
Non-ionic surfactants, perfume (BENZYL BENZOATE, 2-(4-tert-Butylbenzyl) < 5%<br />
propionaldehyd)<br />
Additional information: Please refer to Chapter 16 for the texts of the listed danger indications.<br />
-<br />
4. First aid measures<br />
·<br />
·<br />
·<br />
General information:<br />
Toxic symptoms may only appear many hours later, therefore remain under medical supervision for at least<br />
48 hours after an accident.<br />
After inhalation:<br />
Plenty of fresh air, if unwell seek medical advice.<br />
If unconscious, position and transport in the lateral recumbent position.<br />
After skin contact:<br />
Seek medical advice in case of lasting skin-irritation.<br />
Immediately rinse with soap and plenty of water.<br />
Do not use any solvents.<br />
After eye contact:<br />
Rinse out with plenty of running water with the eyelid held wide open for several minutes.<br />
Seek medical advice immediately.<br />
After swallowing:<br />
Rinse mouth and drink plenty of water. Seek medical advice.<br />
5. Fire-fighting measures<br />
·<br />
·<br />
Suitable extinguishing media:<br />
CO2, extinguishing powder or water jet. Fight larger fires with water jets or alcohol-resistant<br />
foam.<br />
Protective equipment: Wear protective breathing mask.<br />
6. Procedure in case of accidental release<br />
·<br />
·<br />
·<br />
Personal safety precautions: Wear protective equipment.<br />
Measures for environmental protection: Do not allow to enter the sewer system/surface waters/groundwater.<br />
Cleaning/Collecting procedure:<br />
Absorb using liquid-binding material (sand, kieselguhr, acid binder, universal binder, sawdust).<br />
Dispose contaminated material as waste according to point 13.<br />
Ensure adequate ventilation.<br />
7. Handling and storage<br />
·<br />
·<br />
Handling:<br />
Information about safe handling:<br />
Ensure good ventilation/extraction at the workplace.<br />
(continued from page 1)<br />
EN<br />
(continued on page 3)<br />
EN