your Interactive PDF w/bookmarks - Tyson Tool Company Limited

MODULHARD’ANDREA
Chucking Tools
Collet Chucking Tools
PE
ER DIN 6499
Collet chucks to DIN 6499 sizes ER11, ER16, ER20,
ER25, ER32, ER40 supplied with axial adjustment
screw and without collets.
Designation MHD' d¹ d L L¹ kg Torque Spec’s
PE-16/ER11M 16 .02 - .28 .98 .10 0.03 ER-11M 22 ft / lbs E11M
PE-20/ER16M 20 .02 - .39 1.26 .04 0.06 ER-16M 30 ft / lbs E16M
PE-25/ER20M 25 .04 - .51 1.57 .10 0.15 ER-20M 59 ft / lbs E20M
PE-32/ER25M 32 .04 - .63 1.65 .06 0.25 ER-25M 118 ft / lbs E25M
PE-40/ER25 40 .04 - .63 1.77 .20 0.40 UM/ER25 147 ft / lbs E25
PE-50/ER25
.04 - .63 1.89 .28 0.70 UM/ER25 147 ft / lbs E25
50
PE-50/ER32 .08 - .79 2.17 .31 1.00 UM/ER32 162 ft / lbs E32
PE-63/ER32
.08 - .79 2.32 .47 1.30 UM/ER32 162 ft / lbs E32
63
PE-63/ER40 .12 - 1.02 2.52 .47 1.50 UM/ER40 184 ft / lbs E40
Supplied without collets and clamping wrenches
Note: It is recommended that proper torque values are used to tighten lock nut to prevent possible damage due to over-tightening
Ultra-Tight
FORCE Milling Chuck
Designation MHD' d¹ d² d³ L L¹ kg
AMC-M50-0750-TR 50 .75 1.89 2.36 2.36 1.00 WR-MC075
AMC-M63-1250-TR 63 1.25 2.60 3.15 3.15 2.00 WR-MC125
Supplied without collets and clamping wrenches
1/2" & 3/4"
Diameter Capacity
Milling Chucks
Designation d¹ d² d³ OAL kg
SS075MC-0500-7.00
.750 7.00 .40 WR-MC050
SS100MC-0500-7.00 .500 1.10
1.000 7.00 .64 WR-MC050
SS100MC-0500-9.00 1.000 9.00 .84 WR-MC050
SS100MC-0750-9.00
1.000 9.00 1.60 WR-MC075
.750 1.89
SS125MC-0750-9.00 1.250 9.00 1.86 WR-MC075
18