your Interactive PDF w/bookmarks - Tyson Tool Company Limited
your Interactive PDF w/bookmarks - Tyson Tool Company Limited
your Interactive PDF w/bookmarks - Tyson Tool Company Limited
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MODULHARD’ANDREA<br />
Testarossa<br />
TRM-50<br />
Ø 1.10 - 2.13<br />
Finishing & Super-Finishing<br />
Designation MHD' d¹ ع L¹ kg<br />
<strong>Tool</strong>holder<br />
Extension<br />
Cartridge<br />
TRM-50/50 50<br />
1.10 - 1.65<br />
1.42 - 2.13<br />
2.48<br />
P-25.63<br />
1.00<br />
4.13 P-25.105<br />
2.48<br />
P-25.63<br />
1.00<br />
4.13 P-25.105<br />
SFTP-25<br />
SFCC-25<br />
SFTP-32<br />
SFCC-32<br />
•<br />
•<br />
•<br />
•<br />
<strong>Tool</strong>holder extensions and cartridges must be purchased separately<br />
U-TRONIC<br />
U-TRONIC are medium and large sized CN heads<br />
that are connected to the U axis of the CNC in<br />
the tooling machine for outer facing, inner facing,<br />
back-facing, cylindrical and conical boring and<br />
threading, concave and convex radius machining<br />
through the interpolation with the other axles of<br />
the tooling machine. They can be applied manually<br />
or automatically and with pallet systems on boring<br />
machines, machining centres and special machines.<br />
They are constructed in 6 models from ø 360 to<br />
ø 1000 mm. All these include an internal passage<br />
for coolant. Special versions of U-TRONIC, with two<br />
slides or with counterweights for selfbalancing,<br />
may be supplied if required. Fixed tool holders<br />
may be applied to the slide, with either manual<br />
or automatic tool changers. Any application on<br />
machines that do not permit the connection to an<br />
axis of the CNC, may be made by managing the<br />
motor of the drive unit with a practical, simple, and<br />
economical U-CONTROL positioner with wireless<br />
remote control.<br />
75