duropal - Hpl- tecHno- loGY

6. TECHNICAL INFORMATION
6.1 TOOL INFORMATION
Material PRODUCTION STEP TOOL CUTTING SPEED in m/s RpM feed in m/min
HPL Panel cutting Circular saw bench 40–60 approx. 3,000–4,000 10–30
HPL on raw chipboard Format cutting Circular saw bench 40–60 approx. 3,000–4,000 manually approx. 10
HPL on raw chipboard Format cutting Double-end profiler
(pre-grooving, cutting)
HPL on raw chipboard Milling edges Spindle moulder or edge
processing machine
HPL on raw chipboard Milling edges Double-end profiler
(postmilling)
40–60 approx. 6,000 manually
approx. 6–20
40–60 approx. 6,000–9,000 approx. 6–15
40–60 approx. 6,000 approx. 6–20
HPL on raw chipboard Grooving Circular saw bench 40–60 approx. 3,000–4,000 approx. 3–8
HPL on raw chipboard Grooving Spindle moulder 40–60 approx. 6,000 approx. 3–8
HPL on raw chipboard Grooving Double-end profiler 40–60 approx. 6,000–9,000 approx. 6–20
HPL on raw chipboard Grooving Router
approx. 12,000–
18,000
approx. 3–8
HPL on raw chipboard Grooving Drill, dowelling machine approx. 3,000–6,000
6.2 FEED SPEED
Feed speed in m/min based on the processing length and time
Time for
travel in s
FEED SPEED IN M/MIN AND PROCESSING LENGTH IN M
1 2 3 4 5 6 7 8 9
1 60 120 180 240 300 360 420 480 540
2 30 60 90 120 150 180 210 240 270
3 20 40 60 80 100 120 140 160 180
4 15 30 45 60 75 90 105 120 135
5 12 24 36 48 60 72 84 96 108
6 10 20 30 40 50 60 70 80 90
7 9 17 26 34 43 52 60 69 77
8 7.5 15 22.5 30 37.5 45 52.5 60 67.5
9 6.7 13 20 27 34 40 47 54 60
10 6 12 18 24 30 36 42 48 54
Example: processing length 5 m, feed speed 50 m/min – travel time needed: 6 s
_ 22