duropal - Hpl- tecHno- loGY

RECOMMENDATIONS for
rocessing
uropal-hpl-solid
Duropal-HPL-Solid has a high net weight. The value of the material is considerable so
please observe the following recommendations for handling and processing.
RECOMMENDATIONS FOR THE HANDLING AND PROCESSING OF Duropal-HPL-Solid
TRANSPORTATION AND STORAGE
TRANSPORTATION
– Please ensure that, if transporting on pallets, they are sufficiently large, flat and strong.
– The pallets and stacks of boards must be secured against slipping and sliding.
– Foreign bodies and abrasive impurities on the stack of boards should be avoided as they
may cause indentations and damage.
– When loading and unloading the stacks by hand or with suction lifter, lift each one
individually; do not push or pull them against each other.
STORAGE
– You will achieve the optimum storage conditions in closed rooms under normal indoor
room conditions (temperature 18-25 °C, relative humidity 50-65%).
– Items are to be stored horizontally on a flat surface, with the edges flush, and the whole
stack wrapped in plastic film. The whole surface of the top board must be covered by a
cover panel.
– Stacks of boards must be wrapped in plastic film.
2. CONDITIONING
– Before processing, Duropal-HPL-Solid and the core material must be stored together for
at least eight days at 20 °C and 50% relative humidity.
– Please ensure that the materials do not get too damp.
_ 36