Setup Checklist - CTLT at Waubonsee Community College
Setup Checklist - CTLT at Waubonsee Community College
Setup Checklist - CTLT at Waubonsee Community College
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Setup</strong> <strong>Checklist</strong><br />
Laptop<br />
Power up the laptop<br />
Open the d<strong>at</strong>abase<br />
Open Notepad and minimize<br />
Launch Cardsmith IDMS from the desktop<br />
<br />
Click the Folder button<br />
<br />
Select WCC<br />
Login (Just check the checkbox)<br />
Check to see th<strong>at</strong> encoding is enabled<br />
Camera<br />
Remove the lens cap<br />
Set the exposure to P<br />
Turn on the camera<br />
Set to auto‐focus on the lens<br />
Turn on the flash<br />
Author: Sean Henson, System Applic<strong>at</strong>ion Trainer<br />
2013 Center for Teaching, Learning and Technology<br />
<strong>Waubonsee</strong> <strong>Community</strong> <strong>College</strong><br />
Upd<strong>at</strong>ed 1/30/2013<br />
Page 1 of 2
<strong>Setup</strong> <strong>Checklist</strong><br />
Printer<br />
Press power button to verify th<strong>at</strong> it’s on.<br />
The light should come on.<br />
Make sure the card feeder is full.<br />
Make sure the card hopper is all the way<br />
open. If the hopper isn’t fully open, cards<br />
will not print.<br />
Backdrop<br />
<strong>Setup</strong> the backdrop.<br />
Because it is so light weight, make sure it’s<br />
not in a high traffic area where it could get<br />
bumped.<br />
Author: Sean Henson, System Applic<strong>at</strong>ion Trainer<br />
2013 Center for Teaching, Learning and Technology<br />
<strong>Waubonsee</strong> <strong>Community</strong> <strong>College</strong><br />
Upd<strong>at</strong>ed 1/30/2013<br />
Page 2 of 2