INSTRUCTION HANDBOOK - Utax

Copy Functions
Border Erase
Prevents the appearance of shadows from around the edges of originals.
Choose from the following Border Erase modes.
• Sheet Border Erase – Use this mode to erase black borders around the single sheet original.
Original
Copy
• Book Border Erase – Use this mode to erase black borders around the edges and in the
middle of the original such as a thick books. You can specify the widths individually to erase the
borders around the edges and in the center of the book.
Original
Copy
• Separate Border Erase – Use this mode to specify border widths individually on all sides to
erase.
Original
Copy
The border widths that can be set for each mode are as follows.
Model Type
Inch models
Metric models
Range
0 - 2" (1/8" increments)
0 - 50 mm (1 mm increments)
NOTE: You can set the default width for erasing borders. For further details, refer to Erasing
Borders on page 7-10.
Sheet Border Erase
Follow the steps as below to erase the black borders from around the edges of the single sheet
original.
1 Place the original.
2 Press [Function].
3 Press [Border Erase] ([Erase Mode]).
1-19