cnc milling for model and mold making - imes-icore Webseite

imes-icore MMF – Generous portal machine up to 5 axis for a large spectrum of use!
MMF Characteristics:
:: Steel welded structure of the two long Y gantry axis
:: Webbed side portals made of aluminium-welded structure
:: High-load steel profile guides with 8 linear slides per X- and Z-axis
:: Z-axis centrically mounted on the X-axis
:: Milling spindle ES 915
:: riding along 5 times tool changer
TECHNICAL DATA
travel stroke (X/Y/Z/C/A)
max. travel stroke (X/Y/Z)
Cube dimension (X/Y/Z)
Travel feed rate
Clamping surface (T-nut profile)
dimensions (LxBxH)
drive system
controlling system
repeatability accuracy
resolution
Guide system
option
other sizes /travel stroke on request
MMF
2000/2500/800 mm/±200°/±95°
3000/6000/1000 mm
1000/1500/650 mm
20 m/min
1600 x 1200 mm
3000 x 3500 x 3000 mm
AC power amplifier
numCAD CNC
±0.02 mm
0.01mm
linear guides
electronic hand wheel, Teach-in application,
tactile touch probe
The machine series MMF was developed particularly
for the model, prototype and mould making.
High structure rigidity was the centre of attention
thereby - this results from the solid
structure. Equipped with a rotary swivelling unit as
4th and 5th axis the MMF is suitable optimally for
the five-axis-treatment and milling large volume
work pieces.
The combination of functions like e.g. jerk control,
speed and acceleration pilot control, Look ahead
path control and carrying of tool orientation, permits
best technology utilization and adjustment
to changing requirements, to speed, accuracy and
surface quality.
3 axis system
expandable to 4th axis (rotary axis)
expandable to 4th / 5th axis
AC servo technique
isy CAM 3.2 software
num CAD controlling system
8/9