Machine Specification of “KENDALL & GENTT” PLANO MILLER (14 ...

Annexure –6 (Page 1 of 2)
Machine Specification of “KENDALL & GENTT” PLANO MILLER (14/A/2055)
1. Table length: 12’ (3660 mm)
2. Table width: 5’ (1524 mm)
3. Table traverse : 14’ (4270 mm)
4. Height admit under vertical face: 4’6” (1370 mm)
5. Width between uprights : 6’5” (1956 mm)
6. Distance center of horizontal spindle to top of table:
a. Minimum: Nil
b. Maximum: 3’3” (991 mm)
7. Micro adjustment of vertical spindle sleeve: 10” (254 mm)
8. Micro adjustment of horizontal spindle sleeve: 12” (305 mm)
9. Spindle nose cone: Number 50 international.
10. Spindle speed (16): 12 – 800 rpm
11. Spindle drive motor (02): 20 HP
12. Table feed & traverse motor: 7.5 HP
13. Milling head & feed & traverse motor: 5 HP
14. Cross slide elevating motor: 7.5 HP

Annexure –6 (Page 2 of 2)
Machine Specification of “HMT” Horizontal Surface Grinder, Model SFW-1 (6/A/2020)
1. Working surface: 250 x 1000 mm
2. Max transverse traverse of grinding wheel: 320 mm
3. Max. longitudinal Traverse of table: 1150 mm
4. Max width to be ground with relief at the front & at the rear: 250 mm
5. Max width to be ground without relief at the front & at the rear: 380 mm
6. Max Grinding length: 1000 mm
7. Max Grinding length with new wheel: 400 mm
8. Infinitely variable table speeds: 2.5 – 25 m/min.
9. Automatic continuous transverse feed of grinding wheel: 0.3 – 3.5 m/min
10. Automatic intermittent transverse feed of grinding wheel per table stroke: 1 – 32 mm
11. Precision transverse adjustment of grinding wheel by hand, 1 graduation: 0.005 mm
12. Down feed of grinding wheel, 1 graduation: 0.002 mm
13. Rapid vertical speed of grinding wheel: 0.6 m/min
14. Grinding wheel speed (approx): 1440/2880 RPM
15. Grinding wheel dia up to: 300 mm
16. Grinding wheel width up to: 63 mm
17. Grinding wheel hole: 76 mm
18. Hydraulic Pump motor: 3 HP at 1440 RPM
19. HP of Grinding Motor: 4/5.7
20. Vertical adjustment motor: 0.25 HP at 2880 RPM
21. Connected load of the machine: 11 HP
22. Net weight of the machine when packed (approx): 5000 KG
23. Dimensions of the machine (approx) : (L x W x H): 4300 x 1600 x 2300 mm