Rheem Residential Water Heater Catalog - API of NH
Rheem Residential Water Heater Catalog - API of NH
Rheem Residential Water Heater Catalog - API of NH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Rheem</strong> <strong>Residential</strong><br />
pocket guide<br />
GAS, ELECTRIC & SOLAR TANKTYPE ❘ TANKLESS ❘ ON-LINE PRODUCT GUIDE: RHEEM.COM<br />
<strong>Rheem</strong> National Customer Service<br />
DIVISION OFFICE _______________________ 334-260-1500<br />
CUSTOMER SERVICE, WARRANTY, PARTS ___ 1-800-621-5622<br />
FAX __________________________________ 1-800-535-9538<br />
TECHNICAL SERVICE (1-800-432-8373) _____ 1-800-HEATER3<br />
WEBSITE ______________________________ rheem.com<br />
<strong>Rheem</strong> <strong>Water</strong> Heating<br />
101 Bell Road<br />
Montgomery Alabama 36117-4305<br />
In keeping with its policy <strong>of</strong> continuous progress<br />
and product improvement, <strong>Rheem</strong> reserves the<br />
right to make changes without notice.<br />
Printed in U.S.A. Form No. 105-61 Rev. 18 05/06 WP
Table <strong>of</strong> Contents<br />
GAS<br />
• Tankless 7.4...............................2-3<br />
• Tankless 4.2...............................4-5<br />
• Pr<strong>of</strong>essional GUARDIAN SYSTEM...........6-7<br />
• Pr<strong>of</strong>essional Heavy Duty ...........8-9<br />
• Fury GUARDIAN SYSTEM ...................10-11<br />
• Fury Heavy Duty....................12-13<br />
• PowerVent GUARDIAN SYSTEM .........14-15<br />
• PowerVent HIGH EFFICIENCY ...........16-17<br />
• Fury Direct Vent .....................18-19<br />
• Warrior MANUFACTURED HOUSING...........20-21<br />
• Warrior DV MANUFACTURED HOUSING.....22-23<br />
• Warrior DVX MANUFACTURED HOUSING ..24-25<br />
ELECTRIC<br />
• Pr<strong>of</strong>essional ...........................26-27<br />
• Marathon................................28-29<br />
• Fury........................................30-31<br />
• Warrior MANUFACTURED HOUSING...........32-33<br />
• Marathon Point-<strong>of</strong>-Use...........34-35<br />
• Point-<strong>of</strong>-Use ...........................36-37<br />
• Table Top................................38-38<br />
SOLAR<br />
• Solaraide................................40-41<br />
• Solaraide HE..........................42-43<br />
MISCELLANEOUS<br />
• ProtectionPlus.............................44<br />
• Lifeguard Electric Element..........45<br />
• EverKleen....................................46<br />
• Accessories.................................47<br />
• Therm-X-Guard...........................48<br />
RHEEM NATIONAL<br />
CUSTOMER SERVICE<br />
SEE BACK COVER<br />
1
High Volume Tankless Gas <strong>Water</strong> <strong>Heater</strong> – 7.4 Gallons Per Minute<br />
Qualifies for<br />
up to a $300<br />
Energy Tax Credit!<br />
Indoor and Outdoor Models Available<br />
10-Year Limited Warranty on Heat Exchanger*<br />
3-Year Limited Warranty on Parts*<br />
• Continuous hot water – 7.4 gallons per<br />
minute at a 45° F rise<br />
• Energy saving design<br />
• Compact, space saving design<br />
• Intelligent electronic controls designed to<br />
increase energy efficiency and safety<br />
• Self diagnostic program<br />
• Digital display shows temperature setting and<br />
maintenance codes on remote control<br />
• Exclusive oxygen depletion sensor<br />
• Exclusive film wrap overheat limiter<br />
• Built-in electric blower<br />
• Indoor units use 4" Category III stainless<br />
steel vents and vent horizontally or vertically<br />
• Maximum horizontal or vertical vent run is 47<br />
feet 6 inches including one 90 degree elbow<br />
• Indoor models supplied with a 120 volt<br />
power cord<br />
• Supplied remote control (USC1-117) allows<br />
temp. settings up to 120˚ F<br />
• Optional remote control (UMC-117) allows<br />
temp. settings up to 140˚ F<br />
• Indoor and outdoor models feature freeze<br />
protection to -30° F<br />
• Low NOx emissions meet SCAQMD rule<br />
1121 requirements (pending certification)<br />
* See <strong>Residential</strong> Warranty Information Brochure for<br />
complete warranty information.<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
(Department <strong>of</strong> Energy) test<br />
procedures. D.O.E. national<br />
average fuel rate natural gas<br />
91¢/therm; LP $1.23/gallon.<br />
®<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
GAS WATER FLOW RATE SHIP. EST. ANN.<br />
INPUT TEMP. GPM @ 77° GPM @ 45° CONNECTION WEIGHT ENERGY OPERATING<br />
MODEL NUMBER BTU/HR. TYPE RANGE* RISE MAX. RISE MAX. WATER GAS HEIGHT WIDTH DEPTH VENT (LBS.) FACTOR COST<br />
RTG-74PVN<br />
(NAT. GAS)<br />
19,000 -<br />
199,900<br />
Indoor<br />
100° to<br />
140° F<br />
RTG-74PVP<br />
(LP GAS)<br />
19,000 -<br />
199,900<br />
Indoor<br />
100° to<br />
140° F<br />
RTG-74XN<br />
(NAT. GAS)<br />
19,000 -<br />
199,900<br />
Outdoor<br />
100° to<br />
140° F<br />
RTG-74XP<br />
(LP GAS)<br />
19,000 -<br />
199,900<br />
Outdoor<br />
100° to<br />
140° F<br />
4.2 7.4 3/4 3/4 25-3/8 14-7/8 11-1/8 4 55 .82 $167<br />
4.2 7.4 3/4 3/4 25-3/8 14-7/8 11-1/8 4 55 .82 $246<br />
4.2 7.4 3/4 3/4 25-3/8 14-7/8 11-1/8 N/A 55 .82 $167<br />
4.2 7.4 3/4 3/4 25-3/8 14-7/8 11-1/8 N/A 55 .82 $246<br />
* Factory set maximum temperature is 120° F with supplied USC1-117 remote control.<br />
For temperatures up to 140˚ F, remote control (UMC-117) is required – sold separately.<br />
• For installations above 3,280 feet a high altitude chip is required. Refer to <strong>Rheem</strong> price<br />
list or consult factory for details.<br />
• Consult factory for information on sizing the application<br />
Maximum Hot <strong>Water</strong> Flow Rate and Temperature Rise<br />
Temp. Rise (°F) 45 50 60 70 80 90 100<br />
<strong>Water</strong> Flow (GPM) 7.4 6.7 5.6 4.8 4.2 3.7 3.3<br />
Minimum flow rate required to initiate heating cycle .66 gpm.<br />
Indoor models vent horizontally or vertically<br />
This water heater has a built-in electric blower to force exhaust<br />
gas to the outside. Category III stainless steel vent<br />
(UL1738 certified) is required in<br />
order to avoid damage from<br />
possible condensation.<br />
Side-wall<br />
Type “B” vents are not<br />
permitted.<br />
Side-wall<br />
3
Tankless Gas <strong>Water</strong> <strong>Heater</strong> – 4.2 Gallons Per Minute<br />
Qualifies for<br />
up to a $300<br />
Energy Tax Credit!<br />
Indoor Models<br />
10-Year Limited Warranty on Heat Exchanger*<br />
3-Year Limited Warranty on Parts*<br />
• Continuous hot water – 4.2 gallons<br />
per minute at a 45° F rise<br />
• Energy saving design<br />
• Compact, space saving design<br />
• Intelligent electronic controls<br />
designed to increase energy<br />
efficiency and safety<br />
• Self diagnostic program<br />
• Digital display shows temperature<br />
setting and maintenance codes<br />
• Exclusive oxygen depletion sensor<br />
• Exclusive film wrap overheat limiter<br />
• Built-in electric blower<br />
• Vents horizontally or vertically<br />
• Maximum vent run is 36 feet 2<br />
inches including one 90 degree<br />
elbow<br />
• Uses 3" Category III stainless steel<br />
vent<br />
• Supplied with a 120 volt power cord<br />
• Low NOx emissions meet<br />
SCAQMD rule 1121 requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure for<br />
complete warranty information.<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
(Department <strong>of</strong> Energy) test<br />
procedures. D.O.E. national<br />
average fuel rate natural gas<br />
91¢/therm; LP $1.23/gallon.<br />
®<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
GAS WATER FLOW RATE SHIP. EST. ANN.<br />
INPUT TEMP. GPM @ 77° GPM @ 45° CONNECTION WEIGHT ENERGY OPERATING<br />
MODEL NUMBER BTU/HR. TYPE RANGE* RISE MAX. RISE MAX. WATER GAS HEIGHT WIDTH DEPTH VENT (LBS.) FACTOR COST<br />
RTG-42PVN<br />
(NAT. GAS)<br />
31,500 -<br />
118,000<br />
Indoor<br />
100° to<br />
140° F<br />
RTG-42PVP<br />
(LP GAS)<br />
31,500 -<br />
118,000<br />
Indoor<br />
100° to<br />
140° F<br />
2.4 4.2 3/4 1/2 22-1/4 13-3/4 5-1/8 3 35 .81 $168<br />
2.4 4.2 3/4 1/2 22-1/4 13-3/4 5-1/8 3 35 .81 $250<br />
* Factory set maximum temperature is 120° F.<br />
• For installations above 3,280 feet a high altitude chip is required.<br />
Refer to <strong>Rheem</strong> price list or consult factory for details.<br />
• Consult factory for information on sizing the application<br />
Maximum Hot <strong>Water</strong> Flow Rate and Temperature Rise<br />
Temp. Rise (°F) 45 50 60 70 80 90 100<br />
<strong>Water</strong> Flow (GPM) 4.2 3.8 3.2 2.7 2.4 2.1 1.9<br />
Minimum flow rate required to initiate heating cycle .92 gpm.<br />
Venting<br />
This water heater has a built-in electric<br />
blower to force the exhaust gas to the<br />
outside. 3" Category III stainless steel vent<br />
(UL1738 certified) is required in order to<br />
avoid damage from possible condensation.<br />
A RTG20000BM vent adapter or<br />
equivalent approved vent adapter is<br />
required for vent connection. Contact<br />
distributor or factory for price and<br />
availability.<br />
5
Pr<strong>of</strong>essional Now with the Guardian System <br />
Get<br />
4 MORE YEARS<br />
Available in 40 and 50 Gallon Tall – 40 Gallon Short Gas Models<br />
8-Year* Limited Tank and Parts Warranty with a Pr<strong>of</strong>essional Installation.<br />
With ProtectionPlus the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.<br />
Guardian System <br />
• One-<strong>of</strong>-a-kind air/fuel shut-<strong>of</strong>f device <strong>of</strong>fers double<br />
protection<br />
• Maintenance free – no filter to clean<br />
• Standard replacement parts<br />
Environmentally Friendly Burner<br />
• Low NOx design for low nitrous oxide emissions<br />
Self-Cleaning<br />
• EverKleen patented system fights sediment build-up<br />
• Reduces fuel costs<br />
• Provides more hot water<br />
Easy to Light<br />
• No matches required<br />
Energy Efficient<br />
• More hot water at low operating cost<br />
High Altitude Compliant<br />
• All models are certified for applications up to 6,000<br />
feet above sea level. Some models are certified up to<br />
10,200 feet above sea level. Check factory for listing<br />
Longer Life<br />
• Patented magnesium anode rod design incorporates<br />
a special resistor that protects the tank from rust<br />
Plus…<br />
• Brass drain valve and temperature and pressure<br />
relief valve are included<br />
• Meets or exceeds National Appliance Energy<br />
Conservation Act (NAECA) requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure<br />
for complete warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel rate<br />
natural gas 91¢/therm; LP $1.23/gallon.<br />
®<br />
with ProtectionPlus 7<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
T<br />
Y<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO WATER HT. TO SHIP. ENERGY AVG. ANN.<br />
P GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. HT. TO TANK GAS VENT CONN. SIDE WATER WT. FACTOR OPER. COST<br />
E CAP. MODEL NUMBER NAT. LP NAT. LP NAT. VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. (LBS) NAT. NAT.<br />
40 22V40 PROF 38 – 38.4 – 73 61-3/4 58-3/8 18-1/8 14-1/2 3 8 52-1/4 3/4 120 0.59 $231<br />
38 42V40 PROF 40 34 40.4 34.3 68 61-1/2 57-3/4 19-3/4 14-1/2 3 8 52-1/4 3/4 125 0.60 $227<br />
T 40 RHG PRO40-40F 40 34 40.4 34.3 68 63-1/4 59-3/4 21 14-1/2 3 8 53-1/2 3/4 135 0.62 $220<br />
A<br />
L<br />
50 22V50 PROF 38 – 38.4 – 90 61-1/2 58-1/4 20-1/8 14-1/2 3 8 51-3/8 3/4 130 0.58 $235<br />
L 50 42V50-40 PROF 40 36 40.4 36.4 83 61-1/2 58 21-3/4 14-1/2 3 8 52-1/2 3/4 150 0.58 $235<br />
50 RHG PRO50-40F 40 36 40.4 36.4 83 62-1/4 58-3/4 23 14-1/2 3 8 52-1/2 3/4 165 0.62 $220<br />
50 RHG PRO50-50F 50 – 50.5 – 83 62 58 21-3/4 14-1/2 4 8 52-1/2 3/4 150 0.58 $235<br />
40 42V40SPROF 40 36 40.4 36.4 72 53-7/8 50-1/2 20-1/8 14-1/2 3 8 44 3/4 130 0.59 $231<br />
SHORT<br />
50 42V50SPROF 40 36 40.4 36.4 84 54-1/4 49-3/4 22-1/4 14-1/2 3 8 44 3/4 158 0.59 $231<br />
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: RHG PRO40-40PF.<br />
• For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 22V40 PROFSQ.<br />
<strong>Rheem</strong> Guardian System Features…<br />
Exclusive Combustion Shut-<strong>of</strong>f System<br />
Should a spill incident occur, the Guardian System shuts <strong>of</strong>f<br />
the gas supply and the air supply preventing a sustained<br />
vapor burn in the combustion chamber.<br />
Flame Arrestor Plate<br />
A specially-designed flame arrestor<br />
prevents ignition <strong>of</strong> vapors outside the<br />
combustion chamber.<br />
Maintenance Free<br />
Superior air filtration prevents the<br />
flame arrestor from becoming clogged<br />
by lint, dust and oil.
Pr<strong>of</strong>essional Heavy Duty Gas <strong>Water</strong> <strong>Heater</strong>s<br />
Get<br />
4 MORE YEARS<br />
Available in 60, 75 and 100 Gallon Tall Gas Models<br />
8-Year* Limited Tank and Parts Warranty with a Pr<strong>of</strong>essional Installation.<br />
With ProtectionPlus the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
• Designed for high volume applications<br />
• High BTU input for fast recovery<br />
• Extra durable brass drain valve<br />
• Heat saving flue baffle design<br />
• Temperature and pressure relief valve<br />
included<br />
• Extra durable high temperature dip tube to<br />
meet the most stringent plumbing codes<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
with ProtectionPlus ®<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate natural gas 91¢/therm; LP $1.23/gallon.<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
A<br />
L<br />
L<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO WATER HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. HT. TO TANK GAS VENT CONN. SIDE WATER WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT. LP NAT. LP NAT. LP VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. (LBS) NAT. NAT.<br />
60 RHG PRO60-50NT* 50 50 50.5 50.5 106 106 60 56 23 13-1/4 4 8 48-1/2 3/4 180 0.56 $244<br />
75 RHG PRO75-70N* 70 69 70.7 69.7 109 109 64-1/2 60-1/2 26-1/4 14-3/4 4 11 54-1/2 1 320 0.53 $257<br />
100 RHG PRO100-75 75 69 75.8 69.7 135 135 68 64 26-1/4 14-3/4 4 11 58 1 350 0.48 $284<br />
100 RHG PRO100-73N* 73 – 73.7 – 116 – 68 64 26-1/4 14-3/4 4 11 58 1 350 0.48 $284<br />
* SCAQMD rule 1121 compliance models.<br />
• Specify LP gas when ordering. Add “P” suffix to the model number:<br />
Example: RHG PRO75-70P.<br />
Exclusive Pr<strong>of</strong>essional Installation Warranty<br />
When this <strong>Rheem</strong> PROFESSIONAL water heater is installed by a licensed<br />
contractor, the consumer can upgrade his limited tank and parts warranty from<br />
6 to 8 years by returning to <strong>Rheem</strong> the warranty registration card and a copy<br />
<strong>of</strong> the contractor’s invoice.<br />
This <strong>Rheem</strong> exclusive warranty upgrade feature enhances your value as a<br />
plumbing pr<strong>of</strong>essional. A pr<strong>of</strong>essional installation is a better installation.<br />
Refer to the warranty certificate enclosed with each heater for specific details.<br />
9
Fury Now with the Guardian System <br />
Available in 30, 40, 50 Gallon Tall – 30 and 40 Gallon Short Models<br />
6-Year Limited Tank and Parts Warranty*<br />
With ProtectionPlus the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.<br />
Guardian System <br />
• One-<strong>of</strong>-a-kind air/fuel shut-<strong>of</strong>f device <strong>of</strong>fers double<br />
protection<br />
• Maintenance free – no filter to clean<br />
• Standard replacement parts<br />
Environmentally Friendly Burner<br />
• Low NOx design for low nitrous oxide emissions<br />
Self-Cleaning<br />
with ProtectionPlus • EverKleen patented system fights sediment build-up<br />
• Reduces fuel costs<br />
H<br />
• Provides more hot water<br />
E<br />
Easy to Light<br />
• No matches required<br />
Energy Efficient<br />
®<br />
Get<br />
4 MORE YEARS<br />
• More hot water at low operating cost<br />
Longer Life<br />
• Patented magnesium anode rod design incorporates a<br />
special resistor that protects the tank from rust<br />
High Altitude Compliant<br />
• All models are certified for applications up to 6,000<br />
feet above sea level. Some models are certified up to<br />
10,200 feet above sea level. Check factory for listing<br />
Plus…<br />
• Brass drain valve and temperature and pressure relief<br />
valve are included<br />
• Meets or exceeds National Appliance Energy<br />
Conservation Act (NAECA) requirements<br />
HIGH EFFICIENCY MODELS FEATURE:<br />
• High performance and lower operating cost<br />
• Compliant with many gas utility incentive programs<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel rate<br />
natural gas 91¢/therm; LP $1.23/gallon.<br />
H<br />
E<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
T<br />
A<br />
L<br />
L<br />
S<br />
H<br />
O<br />
RT<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO WATER HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. HT. TO TANK GAS VENT CONN. SIDE WATER WT. FACTOR OPER. COST<br />
CAP. MODEL NUMBER NAT. LP NAT. LP NAT. VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. (LBS) NAT. NAT.<br />
40 42VR40-40F 40 34 40.4 34.3 68 63-1/4 59-3/4 21 14-1/2 3 8 53-1/2 3/4 135 0.62 $220<br />
50 42VR50-40F 40 36 40.4 36.4 83 62-1/4 58-3/4 23 14-1/2 3 8 52-1/2 3/4 165 0.62 $220<br />
29 22V30F 32 30 32.3 30.3 50 59-3/4 56-3/8 16-1/8 14-1/2 3 8 50-3/4 3/4 100 0.62 $220<br />
40 22V40-36F1 36 – 36.4 – 67 61-1/2 58 17-3/4 14-1/2 3 8 53 3/4 120 0.59 $231<br />
40 22V40F1 38 – 38.4 – 73 61-3/4 58-3/8 18-1/8 14-1/2 3 8 52-1/4 3/4 120 0.59 $231<br />
38 42V40F 40 34 40.4 34.3 68 61-1/2 57-3/4 19-3/4 14-1/2 3 8 52-1/4 3/4 125 0.60 $227<br />
50 22V50F1 38 – 38.4 – 90 61-1/2 58-1/4 20-1/8 14-1/2 3 8 51-3/8 3/4 130 0.58 $235<br />
50 42V50-40F 40 36 40.4 36.4 83 61-1/2 58 21-3/4 14-1/2 3 8 52-1/2 3/4 150 0.58 $235<br />
50 42V50-50F 50 – 50.5 – 83 62 58 21-3/4 14-1/2 4 8 52-1/2 3/4 150 0.58 $235<br />
30 22V30S-30F 30 – 30.3 – 50 49-3/4 46-1/4 19-3/4 14-1/2 3 8 40-1/4 3/4 98 0.61 $224<br />
40 22V40SF 36 34 36.4 34.3 72 52-3/4 49-3/8 20-1/8 14-1/2 3 8 42-3/4 3/4 130 0.59 $231<br />
40 42V40SF 40 36 40.4 36.4 72 53-7/8 50-1/2 20-1/8 14-1/2 3 8 44 3/4 130 0.59 $231<br />
50 42V50SF 40 36 40.4 36.4 84 54-1/4 49-3/4 22-1/4 14-1/2 3 8 44 3/4 158 0.59 $231<br />
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: 42VR40-40PF.<br />
• For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 42VR40-40FSQ.<br />
<strong>Rheem</strong> Guardian System Features…<br />
Exclusive Combustion Shut-<strong>of</strong>f System<br />
Should a spill incident occur, the Guardian System shuts<br />
<strong>of</strong>f the gas supply and the air supply preventing a sustained<br />
vapor burn in the combustion chamber.<br />
Flame Arrestor Plate<br />
A specially-designed flame arrestor prevents ignition <strong>of</strong><br />
vapors outside the combustion chamber.<br />
Maintenance Free<br />
Superior air filtration prevents the flame arrestor from<br />
becoming clogged by lint, dust and oil.<br />
11
Fury Heavy Duty Gas <strong>Water</strong> <strong>Heater</strong>s<br />
Get<br />
4 MORE YEARS<br />
Available in 60, 75 and 100 Gallon Tall Gas Models<br />
6-Year Limited Tank and Parts Warranty*<br />
With ProtectionPlus the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.<br />
• Designed for high volume applications<br />
• High BTU input for fast recovery<br />
• Extra durable brass drain valve<br />
• Heat saving flue baffle design<br />
• Temperature and pressure relief valve<br />
included<br />
• Extra durable high temperature dip tube to<br />
meet the most stringent plumbing codes<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
with ProtectionPlus ®<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate natural gas 91¢/therm; LP $1.23/gallon.<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
A<br />
L<br />
L<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO WATER HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. HT. TO TANK GAS VENT CONN. SIDE WATER WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT. LP NAT. LP NAT. LP VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. (LBS) NAT. NAT.<br />
60 42V60-50NT* 50 50 50.5 50.5 107 107 60 56 23 13-1/4 4 8 48-1/2 3/4 180 0.56 $244<br />
75 22VR75-70N* 70 69 70.7 69.7 109 109 64-1/2 60-1/2 26-1/4 14-3/4 4 11 54-1/2 1 320 0.53 $257<br />
100 21V100 75 69 75.8 69.7 135 135 68 64 26-1/4 14-3/4 4 11 58 1 350 0.48 $284<br />
100 21V100N* 73 – 73.7 – 116 – 68 64 26-1/4 14-3/4 4 11 58 1 350 0.48 $284<br />
* SCAQMD rule 1121 compliance models.<br />
• Specify LP gas when ordering. Add “P” suffix to the model number: Example: 21V100P.<br />
13
PowerVent Induced Draft Gas <strong>Water</strong> <strong>Heater</strong> with the Guardian System <br />
Get<br />
4 MORE YEARS<br />
Available in 40 and 50 Gallon Models<br />
6-Year Limited Tank and Parts Warranty*<br />
With ProtectionPlus the 6-Year Limited Tank Warranty Becomes 10 Years!** SEE PG. 44.<br />
Guardian System <br />
• Air/fuel shut-<strong>of</strong>f system <strong>of</strong>fers double protection<br />
• Maintenance free –no filter to clean<br />
Flammable Vapor Detection Sensor<br />
• Protective control system that disables the heater<br />
in the presence <strong>of</strong> flammable vapor accumulation<br />
Flexible Venting Options<br />
• Self-Cleaning – EverKleen patented system fights<br />
sediment build-up<br />
• Reduces fuel costs and provides more hot water<br />
• Patented magnesium anode rod design<br />
incorporates a special resistor that protects the<br />
tank from corrosion for longer life<br />
• Electronic ignition system<br />
• Standard 110 volt electrical connection<br />
• Exceeds National Appliance Energy Conservation<br />
Act (NAECA) and ASHRAE requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
with ProtectionPlus Long venting lengths up to 100 feet<br />
PVC, ABS, or CPVC vent pipe options<br />
• Vertical or horizontal termination<br />
Plus…<br />
New Quiet Blower<br />
Self-Diagnostic System<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
®<br />
Environmentally Friendly Low NOx Burner<br />
(Department <strong>of</strong> Energy) test<br />
• High Altitude Compliant – Tall models are certified<br />
procedures. D.O.E. national average<br />
fuel rate natural gas 91¢/therm;<br />
for applications up to 7,700 feet and short models LP $1.23/gallon.<br />
up to 6,000 feet<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
SHORT<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO HT. TO WATER HT. TO WATER SHIP. ENERGY AVG. ANN.<br />
GAL. MODEL THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. TOP OF TANK GAS CONN. SIDE T&P CONN. WT. FACTOR OPER. COSTS<br />
CAP. NUMBER NAT. LP NAT. LP NAT. ASSEMBLY HT. DIAM. CONN. CNTR. VALVE SIZE (LBS) NAT. NAT. GAS<br />
40 42VP40F 40 40 40.4 40.4 68 69-1/4 59 19-3/4 14 8 53-1/2 3/4 140 0.64 $213<br />
50 42VP50F 42 42 42.4 42.4 87 68-1/4 58 21-3/4 14 8 52-1/2 3/4 170 0.64 $213<br />
40 42VP40SF 36 34 36.4 34.3 71 61-1/2 50-1/2 20-1/4 14 8 44 3/4 152 0.64 $213<br />
50 42VP50SF 36 34 36.4 34.3 85 61-1/2 50-1/2 22-1/4 14 8 44 3/4 176 0.62 $220<br />
• Specify LP gas when ordering. Add “PF” suffix to the model number. Example 42VP40PF.<br />
VENTING INFORMATION FOR 2" VENTS<br />
NUMBER OF MINIMUM MAXIMUM<br />
90° ELBOWS NUMBER PIPE PIPE<br />
WITH VENT OF 45° LENGTH LENGTH<br />
TERMINAL ELBOWS REQ. (FT.) (FT.)<br />
One (1) None 4.0 44.0<br />
One (1) One (1) 4.0 41.0<br />
Two (2) None 4.0 38.0<br />
Two (2) One (1) 4.0 35.0<br />
Three (3) None 4.0 32.0<br />
For the 2" vent, one 90° elbow is approximately equal to<br />
6 feet <strong>of</strong> pipe. One 45° elbow is approximately equal to<br />
3 feet <strong>of</strong> pipe.<br />
VENTING INFORMATION FOR 3" VENTS<br />
NUMBER OF MINIMUM MAXIMUM<br />
90° ELBOWS NUMBER PIPE PIPE<br />
WITH VENT OF 45° LENGTH LENGTH<br />
TERMINAL ELBOWS REQ. (FT.) (FT.)<br />
One (1) None 5.0 95.0<br />
One (1) One (1) 5.0 92.5<br />
Two (2) None 5.0 90.0<br />
Two (2) One (1) 5.0 87.5<br />
Three (3) None 5.0 85.0<br />
Three (3) One (1) 5.0 82.5<br />
Four (4) None 5.0 80.0<br />
Four (4) One (1) 5.0 77.5<br />
Five (5) None 5.0 75.0<br />
For the 3" vent,<br />
one 90° elbow is<br />
approximately<br />
equal to 5 feet <strong>of</strong><br />
pipe. One 45°<br />
elbow is approximately<br />
equal to<br />
2.5 feet <strong>of</strong> pipe.<br />
15
PowerVent High Efficiency, Induced Draft Gas <strong>Water</strong> <strong>Heater</strong><br />
Available in 75 Gallon Model<br />
6-Year Limited Tank and Parts Warranty*<br />
• Flexible venting options available<br />
in PVC, ABC and CPVC,<br />
see chart below<br />
• Rated for installations up to 7,700 feet<br />
• Electronic ignition system<br />
• Allows vertical or horizontal<br />
termination<br />
• NEW! Quiet blower operation<br />
• Heat traps included<br />
• T&P valve provided<br />
• Brass drain valve<br />
• Natural gas models meet low NOx<br />
requirements<br />
• Standard 110 volt electrical<br />
connection<br />
• Exceeds National Appliance Energy<br />
Conservation Act (NAECA) and<br />
ASHRAE requirements<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
(Department <strong>of</strong> Energy) test procedures.<br />
D.O.E. national average fuel rate natural<br />
gas 91¢/therm; LP $1.23/gallon.<br />
Integrated self-diagnostic<br />
system control, thermostat<br />
and gas valve<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
®<br />
T<br />
Y<br />
P<br />
E<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO HT. TO WATER HT. TO WATER SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. TOP OF TANK GAS CONN. SIDE T&P CONN. WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT. LP NAT. LP NAT. LP ASSEMBLY HT. DIAM. CONN. CNTR. VALVE SIZE (LBS) NAT. NAT.<br />
75 22VRP75 75 75 75.8 75.8 130 130 69-1/2 60-1/2 26-1/4 14-3/4 11 54-1/2 1 325 0.53 $257<br />
TALL<br />
• Specify LP gas when ordering. Add “P” suffix to the model number; Example 22VRP75-P.<br />
75 GALLON MODEL MAXIMUM AND MINIMUM VENT LENGTHS<br />
SEA LEVEL (0-2,000 FT.): 3" VENT*<br />
NUMBER OF MINIMUM MAXIMUM<br />
90° ELBOWS NUMBER PIPE PIPE<br />
WITH VENT OF 45° LENGTH LENGTH<br />
TERMINAL ELBOWS REQ. (FT.) (FT.)<br />
One (1) None – 40.00<br />
One (1) One (1) 5.00 37.50<br />
Two (2) None – 35.00<br />
Two (2) One (1) – 32.50<br />
Three (3) None – 30.00<br />
HIGH ALTITUDE (2,000-7,700 FT.): 3" VENT*<br />
NUMBER OF MINIMUM MAXIMUM<br />
90° ELBOWS NUMBER PIPE PIPE<br />
WITH VENT OF 45° LENGTH LENGTH<br />
TERMINAL ELBOWS REQ. (FT.) (FT.)<br />
One (1) None – 35.00<br />
One (1) One (1) 5.00 32.50<br />
Two (2) None – 30.00<br />
Two (2) One (1) – 27.50<br />
Three (3) None – 25.00<br />
Three (3) One (1) – 22.50<br />
SEA LEVEL TO HIGH ALTITUDE (0-7,700 FT.): 4" VENT*<br />
NUMBER OF MINIMUM MAXIMUM<br />
90° ELBOWS NUMBER PIPE PIPE<br />
WITH VENT OF 45° LENGTH LENGTH<br />
TERMINAL ELBOWS REQ. (FT.) (FT.)<br />
One (1) None – 55.00<br />
One (1) One (1) 5.00 52.50<br />
Two (2) None – 50.00<br />
Two (2) One (1) – 47.50<br />
Three (3) None – 45.00<br />
Three (3) One (1) – 42.50<br />
* For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet <strong>of</strong> pipe. One 45° elbow is approximately equal to 2.5 feet <strong>of</strong> pipe.<br />
17
Fury DV <strong>Rheem</strong>glas ® Energy Miser ® Direct Vent Gas <strong>Water</strong> <strong>Heater</strong><br />
NEW LONGER VENTING**<br />
Available in 40 and 50 Gallon Models<br />
6-Year Limited Tank and Parts Warranty*<br />
With ProtectionPlus the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PG. 44.<br />
• Adjustable coaxial vent allows flexibility<br />
<strong>of</strong> installation – uses outside air for<br />
combustion and requires no electrical<br />
power<br />
• Aluminum vent and cap base to prevent<br />
staining <strong>of</strong> building exterior<br />
• Heat saving flue baffle design<br />
included<br />
• Exclusive <strong>Rheem</strong>glas ® tank lining<br />
resists corrosion and prolongs tank life<br />
• Gas control and combination thermostat<br />
• Anode rod equalizes aggressive water<br />
action<br />
• Relief valve opening – side connect for<br />
fast economical installation<br />
• Durable plastic formula dip tube<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
Get<br />
4 MORE YEARS<br />
with ProtectionPlus Brass drain valve<br />
• Temperature and pressure relief valve<br />
®<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
(Department <strong>of</strong> Energy) test procedures.<br />
D.O.E. national average fuel rate<br />
natural gas 91¢/therm; LP $1.23/gallon.<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
SHORT<br />
DESCRIPTION FEATURES DIMENSIONS ENERGY INFO.<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK HT. TO VENT HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. VENT HT. DIAMETER GAS CONN. SIZE SIDE T&P WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT. NAT. NAT. A B C D E F (LBS) NAT. NAT.<br />
50 22DV50-40N* 40 40.4 85 68 57-1/4 21-3/4 14-1/4 5 51-1/4 164 0.58 $235<br />
50 22DV50-38 38 38.4 85 72-107† 57-1/4 21-3/4 14-1/4 6 51-1/4 164 0.58 $235<br />
40 22DV40S-36N* 36 36.4 65 63-98† 48-1/4 21-3/4 14-1/4 6 43 152 0.59 $231<br />
* For SCAQMD rule 1121 compliance.<br />
† With vertical Vent Kit #SP20061. Venting dimensions are approximate.<br />
• If side wall is combustible material, 1" clearance must be included in adjustment range.<br />
NOTE: Maximum adjustment range for vent system is 10" for 22DV50-40N;<br />
40" for 22DV40S-36N and 22DV50-38. Review installation manual before installation.<br />
UPPER INLET<br />
BOX ASSEMBLY<br />
HOT WATER<br />
CONNECTION<br />
COLD WATER<br />
CONNECTION<br />
VENTING – ROUGHING IN DIMENSIONS (INCHES)<br />
MODEL 4 FEET VENTING SIDE VENTING (G) REAR VENTING (H) OPTIONAL HEIGHT (A)<br />
TYPE NUMBER AVAILABLE MIN. MAX. MIN. MAX. WITH VENT KIT #SP20061<br />
TALL 22DV50-40N N/A 8-1/8 18-1/8 3-1/8 13-1/8 N/A<br />
TALL 22DV50-38 Horizontal 8-1/8 48 3-1/8 43 72-107†<br />
SHORT 22DV40S-36N & Vertical 8-1/8 48 3-1/8 43 63-98†<br />
**NEW LONGER VENTING!<br />
Up to 4 feet above the water heater and 4 feet from<br />
an outside wall with 22DV50-38 and 22DV40S-36N.<br />
<strong>Water</strong> heater equipped for venting up to 4 feet horiz.<br />
Optional venting up to 4 feet vertical – order kit<br />
#SP20061.<br />
<strong>Rheem</strong> Exclusive Adjustable<br />
Coaxial Vent Allows Flexibility<br />
<strong>of</strong> Installation…<br />
You may orient the Fury DV for easiest<br />
service access, because the adjustable<br />
coaxial vent can swivel 360 degrees.<br />
A<br />
B<br />
F<br />
D<br />
2"<br />
3/4" N.P.T.<br />
RELIEF VALVE<br />
OPENING<br />
C<br />
24-3/4"<br />
1/2"<br />
E<br />
G<br />
(G: SIDE VENTING<br />
RANGE OF<br />
ADJUSTMENT)<br />
H<br />
(H: REAR VENTING<br />
RANGE OF<br />
ADJUSTMENT)<br />
10"<br />
EXTERIOR<br />
WALL<br />
19
Warrior Gas <strong>Water</strong> <strong>Heater</strong> Specifically Designed for Manufactured Housing<br />
Available in 30 and 40 Gallon Models<br />
5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*<br />
• Optional air inlet and leg enclosure allows<br />
outside air to be supplied to the water<br />
heater without exposing the home to<br />
cold air<br />
• Two hole top for anode rod and hot water<br />
outlet<br />
• Factory installed temperature and pressure<br />
relief valve – side location<br />
• Exclusive <strong>Rheem</strong>glas ® tank lining resists<br />
corrosion and prolongs tank life<br />
• Anode rod equalizes aggressive water<br />
action<br />
• Piezo ignitor – easy light pilot<br />
• Field convertable controls for natural gas<br />
or LP operation<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
• Anode rod equalizes aggressive water<br />
action<br />
• Cold water inlet – side connection allows<br />
for quick, economical hook-up<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate natural gas 91¢/therm; LP $1.23/gallon.<br />
®<br />
DESCRIPTION FEATURES DIMENSIONS ENERGY INFO.<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK WATER HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. DIAM. VENT HT. VENT CONN. SIDE WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT. NAT. NAT. (IN.) (IN.) (IN.) SIZE CNTR. T&P (LBS) NAT. NAT.<br />
30 21VR30T 34 34.3 49 17-3/4 60-1/4 57 3 8 51-1/2 110 0.61 $224<br />
40 21VR40T 34 34.3 64 19-3/4 60-3/4 57-1/2 3 8 51-1/2 125 0.59 $231<br />
The Warrior is CSA certified for manufactured<br />
home use, meets ANSI Standards for modular<br />
home construction and complies with HUD safety<br />
and construction standards.<br />
PART NUMBERS<br />
30 Gallon 40 Gallon<br />
Air Inlet AP11596 AP11596<br />
Leg Enclosure AE24609C AE24609D<br />
Draft Diverter<br />
New improved design<br />
provides efficient heating<br />
with down-draft<br />
protection.<br />
Optional Air Inlet<br />
and Leg Enclosure<br />
Galvanized wrap-around<br />
leg enclosure and metal<br />
tabular air inlet are<br />
affixed to the base. Inlet<br />
is equipped with a 1/2"<br />
screen for protection<br />
against rodents.<br />
21
Warrior DV The Direct Vent Gas <strong>Water</strong> <strong>Heater</strong> for Manufactured Housing<br />
Available in 30, 40 and 50 Gallon Models<br />
5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*<br />
• No external vented door is required<br />
• All combustion air comes from outside the<br />
home<br />
• Provides maximum design freedom since it<br />
can be placed anywhere within the home<br />
• Hot water outlet located at top<br />
• Factory installed temperature and pressure<br />
relief valve – side location.<br />
• Exclusive <strong>Rheem</strong>glas ® tank lining resists<br />
corrosion and prolongs tank life<br />
• Field convertable controls for natural gas or<br />
LP operation<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
• Piezo ignitor – easy light pilot<br />
• Certified for manufactured (HUD) and<br />
modular construction<br />
• Anode rod equalizes aggressive water<br />
action<br />
• Cold water inlet – side connection allows<br />
for fast, economical hook-up<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate natural gas 91¢/therm; LP $1.23¢/gallon.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO ROOF HT. TO SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. HT. TO TANK GAS VENT JACK SIDE WATER WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT/ LP NAT./LP NAT./ LP VENT HT. DIAM. CONN. SIZE VENT SZ. T&P CONN. (LBS) NAT./LP NAT. LP<br />
30 21VR30DV 30 30.3 51 57 57 17-3/4 14-1/2 3 5 51-1/2 20 110 0.61 $224 $331<br />
40 21VR40DV 30 30.3 60 57-1/2 57-1/2 19-3/4 14-1/2 3 5 51-1/2 20 125 0.59 $231 $342<br />
50 21VR50DV 32 32.3 67 57 57 21-3/4 14-1/2 3 5 51-1/2 20 150 0.58 $235 $348<br />
A<br />
LL<br />
ROOF JACKS<br />
12" Non Adjustable & Air Inlet AP12032E<br />
15-32" Adjustable & Air Inlet AP12032B<br />
30-60" Adjustable & Air Inlet AP12032C<br />
48-95" Adjustable & Air Inlet AP12032D<br />
THE WARRIOR DV IS U.L. CERTIFIED FOR MANUFACTURED HOME USE,<br />
MEETS ANSI STANDARDS FOR MODULAR HOME CONSTRUCTION, AND<br />
COMPLIES WITH HUD SAFETY AND CONSTRUCTION STANDARDS.<br />
AIR INLETS<br />
6" Non Adjustable AP12019B<br />
11-22" Adjustable AP12017B<br />
EXTENSION PIPE KIT<br />
Ro<strong>of</strong> Jack Extension Pipe Kit<br />
AP12021<br />
• Ro<strong>of</strong> jack and air inlet must<br />
be ordered separately with<br />
30, 40 and 50 gallon direct<br />
vent models and must be in<br />
accordance with instructions<br />
furnished with the heater. No<br />
other ro<strong>of</strong> jack or air inlet<br />
assemblies are approved for<br />
installation with this heater.<br />
Clamps and secure strapping<br />
are packed in water heater<br />
carton.<br />
Adjustable Ro<strong>of</strong> Jack Vent<br />
New design allows<br />
adjustment to ro<strong>of</strong> pitches<br />
<strong>of</strong> up to 5/12". Four ro<strong>of</strong><br />
jacks available to<br />
accommodate ro<strong>of</strong><br />
thickness <strong>of</strong> 12" up to 95".<br />
Direct Combustion<br />
Air Inlet<br />
Air is drawn directly into<br />
combustion chamber<br />
through air inlet fixed to<br />
base; 1/2" screen for<br />
rodent protection.<br />
23
Warrior DVX The Vertical Co-Axial Direct Vent Gas <strong>Water</strong> <strong>Heater</strong> for Manufactured Housing<br />
Available in 40 and 50 Gallon Models<br />
5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*<br />
• Installed side mounted T&P valve<br />
• No external vented door required<br />
• Can be placed anywhere in the home<br />
• Field convertible controls for natural gas<br />
or LP operation<br />
• 3/4" top connections for hot and cold<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
• Venting system eliminates the need to<br />
cut a hole in the floor<br />
• Piezo ignitor – easy light pilot<br />
• Certified for manufactured (HUD) and<br />
modular construction<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate natural gas 91¢/therm; LP $1.23¢/gallon.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
SHORT<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
TANK<br />
VENT<br />
GAS INPUT IN RECOVERY IN FIRST HOUR DIAM. HEIGHT SIZE SHIP. ENERGY AVG. ANN.<br />
GAL. THOUS. BTU/HR. G.P.H. 90° RISE DEL. G.P.H. WATER WT. FACTOR OPER. COSTS<br />
CAP. MODEL NUMBER NAT/ LP NAT./LP NAT./ LP A B C CONNECTION (LBS) NAT./LP NAT. LP<br />
50 22V50DVX 38 38.4 67 21-3/4 57 5 3/4 164 0.58 $235 $348<br />
40 22V40SDVX 36 36.4 62 21-3/4 48-1/4 5 3/4 152 0.59 $231 $342<br />
THE WARRIOR DVX IS ANSI AND U.L. CERTIFIED FOR USE IN<br />
MODULAR HOME CONSTRUCTION AND MANUFACTURED<br />
HOME USE. THIS UNIT COMPLIES WITH HUD SAFETY AND<br />
CONSTRUCTION STANDARDS.<br />
UPPER INLET<br />
BOX ASSEMBLY<br />
HOT WATER<br />
CONNECTION<br />
COLD WATER<br />
CONNECTION<br />
29-1/4"<br />
ROOF JACK<br />
VERTICAL VENT KITS<br />
24-37" Adjustable AP13335A<br />
33-68" Adjustable AP13335B<br />
45-97" Adjustable AP13335C<br />
55-132" Adjustable AP13335D<br />
65-164" Adjustable AP13335E<br />
Ro<strong>of</strong> Jacks must be ordered separately<br />
with this direct vent water heater and<br />
installed in accordance with the instructions<br />
furnished with the heater. No other ro<strong>of</strong><br />
jack or vertical vent kit is approved for<br />
installation with this heater.<br />
SEE CHART<br />
FOR ROOF<br />
JACKS<br />
B<br />
C<br />
A<br />
25
Pr<strong>of</strong>essional Sold and Installed Only by Plumbing Pr<strong>of</strong>essionals<br />
Available in 30, 40, 50, 65 and 80 Gallon Electric Models<br />
8-Year* Limited Tank and Parts Warranty with a Pr<strong>of</strong>essional Installation.<br />
With ProtectionPlus the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.<br />
Get<br />
4 MORE YEARS<br />
with ProtectionPlus <br />
• Brass drain valve<br />
• Stainless steel lower heating element<br />
• EverKleen self cleaning device<br />
• Premium grade anode rod<br />
• Temperature and pressure relief valve included<br />
• Exclusive <strong>Rheem</strong>glas ® tank lining resists<br />
corrosion and prolongs tank life<br />
• Isolated tank design reduces conductive heat<br />
loss<br />
• Electric junction box located above heating<br />
elements for easy installation<br />
• Over-temperature protector cuts <strong>of</strong>f power in<br />
excess temperature situations<br />
• Automatic thermostat keeps water at desired<br />
temperature<br />
• Compliant with many electric utility incentive<br />
programs<br />
• Meets or exceeds National Appliance Energy<br />
Conservation Act (NAECA) and C.E.C.<br />
requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
A<br />
LL<br />
MED.<br />
S<br />
H<br />
O<br />
RT<br />
DESCRIPTION FEATURES DIMENSIONS ENERGY INFORMATION<br />
RECOVERY APPROX. AVERAGE<br />
GAL. FIRST HOUR IN G.P.H. HEIGHT HEIGHT TO DIAMETER SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER RATING G.P.H. @ 90° RISE (IN) WATER CONN. (IN.) (LBS.) FACTOR OPER. COST<br />
40 RHE PRO40-2 56 21 46-3/4 46-3/4 22-1/4 104 0.94 $402<br />
40 RHEH PRO40-2 57 21 59-1/4 59-1/4 17-3/4 96 0.92 $411<br />
50 RHE PRO52-2 67 21 57 57 22-1/4 123 0.94 $402<br />
65 RHE PRO66-2 71 21 58-3/4 58-3/4 23 160 0.92 $411<br />
80 RHE PRO80-2 88 21 59 59 24-1/2 181 0.92 $411<br />
30 RHEM PRO30-2 44 21 36 36 19-3/4 80 0.93 $406<br />
50 RHEM PRO52-2 62 21 46 46 24-1/4 128 0.93 $406<br />
30 RHES PRO30-2 42 21 30 30 22-1/4 83 0.93 $406<br />
38 RHES PRO40-2 46 21 31-1/2 31-1/2 23 108 0.92 $411<br />
47 RHES PRO50-2 55 21 32 32 26-1/4 149 0.91 $415<br />
• <strong>Heater</strong>s furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.<br />
• If heating elements <strong>of</strong> different wattages than those shown are demanded by zone requirements, they must be specifically requested.<br />
• Special Wiring Options – A limited number <strong>of</strong> special wiring options are available. Consult factory for price and availability.<br />
• All models equipped with heat traps.<br />
Recovery = wattage/2.42 x temp. rise °F.<br />
Example:<br />
4500W = 21 GPH<br />
2.42 x 90°<br />
27
Marathon …Shaping The Future<br />
Available in 40, 50, 85 and 105 Gallon Electric Models<br />
Lifetime Limited Tank Warranty* 6-Year Limited Parts Warranty*<br />
• Seamless, blow-molded, polybutylene tank<br />
– impervious to rust and corrosion<br />
• Multiple layers <strong>of</strong> filament wound fiberglass<br />
give the tank unmatched strength<br />
• Polyurethane Envir<strong>of</strong>oam insulation helps<br />
reduce energy consumption<br />
• The highest energy factors (EF) available!<br />
• Pipe wrap energy saving kit included to<br />
achieve maximum energy savings<br />
• Recessed drain valve is out <strong>of</strong> the way <strong>of</strong><br />
brooms and scrubbers<br />
• Tough molded polyethylene outer shell<br />
resists dents and scratches<br />
• Bowl shaped bottom allows complete<br />
sediment draining<br />
• High temperature polysulfone dip tubes<br />
• Thermally fused upper element provides<br />
protection against “dry-firing”– stainless<br />
steel incoloy lower element for resistance to<br />
lime build-up<br />
• Factory installed conduit between element<br />
control boxes<br />
• All plastic tank eliminates the need for an<br />
anode rod<br />
• Factory installed temperature and pressure<br />
relief valve<br />
• Factory installed vacuum relief valve<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
T<br />
Y<br />
P<br />
E<br />
A<br />
LL<br />
DESCRIPTION FEATURES DIMENSIONS ENERGY INFORMATION<br />
RECOVERY APPROX. AVERAGE<br />
GAL. FIRST HOUR IN G.P.H. HEIGHT HEIGHT TO DIAMETER SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER RATING G.P.H. @ 90° RISE (IN) WATER CONN. (IN.) (LBS.) FACTOR OPER. COST<br />
40 MR40245 52 21 61-1/2 62-1/2 21-3/4 91 0.94 $402<br />
T<br />
50 MR50245 61 21 62-3/4 63-3/4 23-1/2 103 0.94 $402<br />
85 MR85245 91 21 66-1/4 67-1/4 28-1/4 139 0.92 $411<br />
105 MR105245 104 21 66-3/4 67-3/4 30-1/4 152 0.91 $415<br />
SHORT 50 MSR50245 54 21 47-1/4 48-1/4 28-1/4 101 0.94 $402<br />
• 240 volt AC single phase standard<br />
• For height to top <strong>of</strong> T&P and heat traps add 3-1/2" to the height to<br />
water connection.<br />
Maximum test pressure: 300 PSI<br />
Maximum working pressure: 150PSI<br />
Recovery = wattage/2.42 x temp. rise °F.<br />
Example:<br />
4500W = 21 GPH<br />
2.42 x 90°<br />
Your Marathon is warranted not to leak for as<br />
long as you own your home*…<br />
The Marathon <strong>of</strong>fers this no-leak promise because <strong>of</strong> its superior,<br />
non-metallic PermaGuard tank construction…A seamless blow<br />
molded polybutylene inner tank with a filament wound fiberglass<br />
outer tank for maximum strength. Superior performance, highefficiency<br />
and low operating cost…for a lifetime*!<br />
* See <strong>Residential</strong> Warranty Information Brochure at your dealer for complete warranty information.<br />
29
Fury <strong>Rheem</strong>glas ® Energy Miser ® Electric <strong>Water</strong> <strong>Heater</strong><br />
Get<br />
4 MORE YEARS<br />
with ProtectionPlus <br />
Available in 30, 40, 50, 65, 80 and 120 Gallon Tall – 30 and 50 Gallon Medium –<br />
20, 30, 38 and 47 Gallon Short Models<br />
6-Year Limited Tank and Parts Warranty*<br />
With ProtectionPlus the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.<br />
• EverKleen self cleaning device<br />
• Brass drain valve<br />
• Temperature and pressure relief valve included<br />
• Isolated tank design reduces conductive heat loss<br />
• High efficiency resistored heating elements<br />
• Anode rod equalizes aggressive water action<br />
• Electric junction box located above heating<br />
elements for easy installation<br />
• Over-temperature protector cuts <strong>of</strong>f power in<br />
excess temperature situations<br />
• Automatic thermostat keeps water at desired<br />
temperature<br />
• Meets or exceeds requirements <strong>of</strong> the National<br />
Appliance Energy Conservation Act (NAECA)<br />
H<br />
E<br />
HIGH EFFICIENCY MODELS FEATURE:<br />
• High performance and lower operating cost<br />
• Compliant with many electric utility<br />
incentive programs<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
H<br />
E<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
A<br />
LL<br />
MED.<br />
T<br />
A<br />
LL<br />
MED.<br />
S<br />
H<br />
O<br />
RT<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
RECOVERY APPROX. AVERAGE<br />
GAL. FIRST HOUR IN G.P.H. TANK HEIGHT TO SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER RATING G.P.H. @ 90° RISE HEIGHT WATER CONN. DIAMETER (LBS.) FACTOR OPER. COST<br />
40 83VR40-2 56 21 46-3/4 46-3/4 22-1/4 104 0.94 $402<br />
50 83VR52-2 67 21 57 57 22-1/4 123 0.94 $402<br />
65 83VR66-2 71 21 58-3/4 58-3/4 23 160 0.92 $411<br />
80 83VR80-2 88 21 59 59 24-1/2 181 0.92 $411<br />
50 83MVR52-2 62 21 46 46 24-1/4 128 0.93 $406<br />
30 82V30-2 48 21 45-3/4 45-3/4 17-3/4 80 0.93 $406<br />
40 82V40-2 53 21 46-1/2 46-1/2 19-3/4 95 0.92 $411<br />
40 82VH40-2 57 21 59-1/4 59-1/4 17-3/4 96 0.92 $411<br />
50 82V52-2 58 21 57 57 19 107 0.91 $415<br />
65 82V66-2 71 21 58-1/2 58-1/2 21 150 0.89 $425<br />
80 82V80-2 88 21 59 59 23 177 0.86 $439<br />
120 82V120-2 99 21 62-1/2 62-1/2 28-1/4 324 0.85 $444<br />
30 82MV30-2 44 21 36 36 19-3/4 80 0.93 $406<br />
50 82MV52-2 62 21 46 46 21-3/4 117 0.90 $420<br />
20 82SV20-2 – 21 31-1/2 31-1/2 17 62 N/A N/A<br />
30 82SV30-2 42 21 30 30 22-1/4 83 0.93 $406<br />
38 82SV40-2 45 21 31-1/2 31-1/2 23 108 0.92 $411<br />
47 82SV50-2 55 21 32 32 26-1/4 149 0.91 $415<br />
• <strong>Heater</strong>s furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.<br />
• If heating elements <strong>of</strong> different wattages than those shown are demanded by zone requirements, they must be specifically requested.<br />
• Single element models available on special order (6000W max.). Substitute “-1” for “-2” in model number.<br />
• Special Wiring Options – A limited number <strong>of</strong> special wiring options are available. Consult factory for price and availability.<br />
• All models equipped with heat traps.<br />
Recovery = wattage/2.42 x temp. rise °F.<br />
Example:<br />
4500W = 21 GPH<br />
2.42 x 90°<br />
31
Warrior <strong>Rheem</strong>glas ® Electric <strong>Water</strong> <strong>Heater</strong> for Manufactured Housing<br />
Available in 20, 30, 40 and 50 Gallon Side Connect Models<br />
5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*<br />
• Lifeguard stainless steel element**<br />
• Isolated tank design reduces heat loss<br />
• High efficiency heating elements<br />
• Exclusive <strong>Rheem</strong>glas ® tank lining resists<br />
corrosion and prolongs tank life<br />
• Anode rod equalizes aggressive water action<br />
• Automatic temperature control thermostat<br />
• Over-temperature protector automatically<br />
cuts <strong>of</strong>f power in excess temperature<br />
situations<br />
• Electrical junction box (for 1/2" and 3/4"<br />
conduit) placed above heating elements<br />
for easy installation<br />
• Meets H.U.D. Safety and Construction<br />
Standards, ASHRAE 90A-80 and<br />
National Appliance Energy Conservation<br />
Act (NAECA) requirements<br />
Design evaluated in accordance with Part 3280.707(d)(1)<br />
or (2) <strong>of</strong> HUD Mobile Home Construction and Safety<br />
Standards for Energy Efficiency.<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
** Double element models upper element only.<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
T<br />
Y<br />
P<br />
E<br />
T<br />
A<br />
LL<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
FIRST HOUR RECOVERY IN G.P.H. APPROX. AVERAGE<br />
GAL. RATING G.P.H. @ 90° RISE TANK HEIGHT TO SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER 3500 WATTS 4500 WATTS 3500 WATTS 4500 WATTS HEIGHT WATER CONN. DIAMETER (LBS.) FACTOR OPER. COST<br />
SIDE CONNECT<br />
20 72V20-1 – – – – 31-1/2 25-1/2 17-3/4 62 N/A N/A<br />
30 72V30-2 41 46 16 21 45-1/2 39-3/4 17-3/4 70 0.93 $406<br />
40 72V40-2 47 51 16 21 46-3/4 40-1/4 19-3/4 94 0.92 $411<br />
50 72V52-2 51 56 16 21 57 50-3/4 19-3/4 108 0.91 $415<br />
• If heating elements <strong>of</strong> different wattages than those shown are demanded by zone requirements, they must be specifically requested.<br />
• <strong>Heater</strong>s furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements. 71-20 furnished with standard 120<br />
volt AC, single phase, 2000 watt heating element.<br />
• Special Wiring Options – A limited number <strong>of</strong> special wiring options are available. Consult factory for price and availability.<br />
• For single element, substitute “-1” suffix for “-2”.<br />
Recovery = wattage/2.42 x temp. rise °F.<br />
Example:<br />
4500W = 21 GPH<br />
2.42 x 90°<br />
33
Marathon Point-<strong>of</strong>-Use…With The All Plastic Tank That Can’t Corrode<br />
Available in 15 and 20 Gallon Electric Models<br />
<strong>Residential</strong> Use: Lifetime Limited Tank Warranty, 6-Year Limited Parts Warranty*<br />
Light Duty Commercial Use: 10-Year Limited Tank Warranty, 1-Year Limited Parts Warranty*<br />
• Seamless, blow-molded, polybutylene<br />
tank – impervious to rust and corrosion<br />
• Multiple layers <strong>of</strong> filament wound fiberglass<br />
give the tank unmatched strength<br />
• Polyurethane Envir<strong>of</strong>oam insulation<br />
helps reduce energy consumption<br />
• The most energy efficient in its class<br />
• Recessed brass drain valve is out <strong>of</strong> the<br />
way <strong>of</strong> brooms and scrubbers<br />
• Tough molded polyethylene outer shell<br />
resists dents and scratches<br />
• Bowl shaped bottom allows complete<br />
sediment draining<br />
• High temperature polysulfone dip tubes<br />
• All plastic tank eliminates the need for an<br />
anode rod<br />
• Thermally fused element to protect tank<br />
against “dry-fire”; low watt, density for<br />
long life<br />
• Factory installed temperature and<br />
pressure relief valve<br />
• Factory installed vacuum relief valve<br />
• Inlet and outlet connections are 3/4" NPT<br />
• <strong>Water</strong> tight grommets keep out overhead<br />
moisture and condensation<br />
* See <strong>Residential</strong> Warranty<br />
Information Brochure for<br />
complete warranty information.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
APPROX.<br />
AVERAGE<br />
GAL. ELEMENT TANK HEIGHT TO TANK SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER WATTAGE VOLTAGE HEIGHT WATER CONN. DIAMETER (LBS.) FACTOR OPER. COST<br />
15 MR15120 2000 120 31-3/4 35-3/4 21-3/4 46 N/A N/A<br />
20 MR20120 2000 120 30-1/2 34-1/2 23-3/4 51 N/A N/A<br />
20 MR20230 3000 240 30-1/2 34-1/2 23-3/4 51 N/A N/A<br />
Marathon Point-<strong>of</strong>-Use water heaters are<br />
built to the same specifications as our fullsize<br />
Marathons. These point-<strong>of</strong>-use water<br />
heaters are great for applications where the<br />
larger water heaters won’t fit, or for special<br />
uses such as:<br />
• Apartments and condo’s<br />
• Restrooms in <strong>of</strong>fices and commercial<br />
buildings<br />
• Cabins, camps and recreational property<br />
• Lavatories in large homes away from<br />
central water heating system<br />
The Marathon Point-<strong>of</strong>-Use <strong>Water</strong> <strong>Heater</strong> Warranty<br />
RESIDENTIAL USE<br />
LIFETIME / 6 YEARS*<br />
Privately owned, single family dwellings – the tank is warranted not to leak<br />
“for as long as you own your home”. If the home is sold, the warranty reverts<br />
to fifteen years from the date <strong>of</strong> the installation and the second owner receives<br />
coverage for the time remaining. Parts are warranted for 6 years from the date<br />
<strong>of</strong> manufacture or 5 years from the effective date, whichever is greater.<br />
LIGHT DUTY COMMERCIAL USE<br />
10 YEARS /1 YEAR*<br />
Apartments, condominiums, restrooms in <strong>of</strong>fice and commercial buildings,<br />
multifamily housing or any light duty commercial/industrial use – the tank is<br />
warranted for 10 years from the date <strong>of</strong> installation. Parts are warranted for<br />
1 year from the date <strong>of</strong> manufacture.<br />
* See Marathon Point-<strong>of</strong>-Use Warranty Information Brochure at your dealer for complete<br />
warranty information.<br />
35
Point-<strong>of</strong>-Use <strong>Rheem</strong>glas ® Energy Miser ® Electric <strong>Water</strong> <strong>Heater</strong>s<br />
2-1/2 Gallon<br />
Available in 2-1/2, 6, 10, 15, 20 and 30 Gallon Models<br />
6-Year Limited Tank and Parts Warranty*<br />
• Space-saving design for installation in<br />
limited spaces<br />
• High efficiency heating element<br />
• Temperature and pressure relief valve<br />
included<br />
• Over-temperature protector cuts <strong>of</strong>f power<br />
in excess temperature situations<br />
• Automatic thermostat keeps water at<br />
desired temperature<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
2-1/2 gallon model features:<br />
• 120 volt model with 3 prong cord set…<br />
simply plug it in! 240 volt model includes a<br />
junction box for easy installation <strong>of</strong> 1/2" or<br />
3/4" conduit<br />
• Wall bracket for easy wall mount installations<br />
• Corrosion resistant 1/4 turn drain valve<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
6, 10, 15, 20 and<br />
30 Gallon<br />
Energy Factor and Average Annual Operating<br />
Costs based on D.O.E. (Department <strong>of</strong> Energy)<br />
test procedures. D.O.E. national average fuel<br />
rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
DESCRIPTION ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION<br />
APPROX.<br />
AVERAGE<br />
GAL. HT. TO HOT HT. TO HT. TO COLD SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER HEIGHT WATER OUTLET DIAMETER SIDE T&P WATER INLET (LBS.) FACTOR OPER. COST<br />
2.5 81VP2S 14 14 9-3/4 – – 22 N/A N/A<br />
6 81VP6S 15-1/4 12-1/2 15-3/4 11-1/2 4-1/4 36 N/A N/A<br />
10 81VP10S 23 20-1/2 15-3/4 19-1/2 4-1/4 46 N/A N/A<br />
15 81VP15S 24-1/4 22 17-3/4 21 4-1/2 54 N/A N/A<br />
20 81VP20S 25-1/4 22-3/4 19-3/4 21-3/4 5 69 N/A N/A<br />
30 82VP30-1* 30 23 21-3/4 23 2-3/4 91 0.93 $406<br />
* For double element, substitute “-2” suffix for “-1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).<br />
• 2.5 gallon model: 1⁄2" N.P.T. inlet and outlet. Relief valve connection 3⁄4".<br />
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)<br />
Power cord supplied with 120 volt models only.<br />
Optional 14" diameter safety catch pan with 1" side drain outlet available (Part No. AS-21990A-G).<br />
• 6 through 30 gallon models: 3⁄4" N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.<br />
<strong>Water</strong> heaters furnished standard with 120 volt AC, 2000 watt single element.<br />
Special wiring options – a limited number <strong>of</strong> wiring options are available. Consult factory for price and availability.<br />
CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be connected<br />
directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.<br />
37
Table Top <strong>Rheem</strong>glas ® Energy Miser ® Electric <strong>Water</strong> <strong>Heater</strong>s<br />
Available in 40 Gallon Model<br />
6-Year Limited Tank and Parts Warranty*<br />
• Brass drain valve<br />
• 36" high top features a four inch high<br />
integral back splash<br />
• Baked enamel top is acid and heat<br />
resistant<br />
• High efficiency screw-in type heating<br />
elements<br />
• Temperature and pressure relief valve<br />
included<br />
• Recessed base and channel in back<br />
panel permit water heater to fit snugly<br />
against wall<br />
• Cold water inlet, hot water outlet, relief<br />
valve and electrical connections at top<br />
<strong>of</strong> tank for easy access and fast<br />
economical installation<br />
• <strong>Rheem</strong>glas ® tank lining resists<br />
corrosion and prolongs tank life<br />
• Direct immersion resistored heating<br />
elements are completely immersed -<br />
all the heat goes into the water<br />
• Extra thick fiberglass insulation<br />
• Automatic thermostat keeps water at<br />
desired temperature<br />
• Meets or exceeds National Appliance<br />
Energy Conservation Act (NAECA)<br />
requirements<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
Energy Factor and Average Annual<br />
Operating Costs based on D.O.E.<br />
(Department <strong>of</strong> Energy) test<br />
procedures. D.O.E. national average<br />
fuel rate electricity 8.6¢/KWH.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
T<br />
Y<br />
P<br />
E<br />
DESCRIPTION FEATURES DIMENSIONS ENERGY INFORMATION<br />
RECOVERY APPROX. AVERAGE<br />
GAL. FIRST HOUR IN G.P.H. WIDTH HEIGHT HEIGHT TO SHIP WT. ENERGY ANNUAL<br />
CAP. MODEL NUMBER RATING G.P.H. @ 90° RISE (IN.) (IN) WATER CONN. (LBS.) FACTOR OPER. COST<br />
40 88H-40D 45 21 25 36 33 156 0.88 $429<br />
• <strong>Heater</strong>s furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.<br />
• If heating elements <strong>of</strong> different wattages than those shown are demanded by zone requirements, they must be specifically requested.<br />
• Special Wiring Options – A limited number <strong>of</strong> special wiring options are available. Consult factory for price and availability.<br />
Recovery = wattage/2.42 x temp. rise °F.<br />
Example:<br />
4500W = 21 GPH<br />
2.42 x 90°<br />
39
Solaraide Storage Tank and Electric Storage <strong>Water</strong> <strong>Heater</strong>s for Solar Applications<br />
Available in 80 and 120 Gallon Side Connect and Top Connect Models<br />
6-Year Limited Tank and Parts Warranty*<br />
• Brass drain valve<br />
• Choice <strong>of</strong> two models…storage tank or<br />
single element water heater, both specially<br />
equipped for installation with residential<br />
direct solar systems<br />
• Special threaded stud located near the<br />
outlet for attachment <strong>of</strong> tank sensors<br />
• Temperature and pressure relief valve<br />
included<br />
• Collector feed and return fittings located at<br />
front <strong>of</strong> tank for convenient installation<br />
• Isolated tank design for better heat<br />
retention<br />
• High efficiency heating element<br />
• <strong>Rheem</strong>glas ® tank lining resists corrosion<br />
and prolongs tank life<br />
• Cold water inlet brings cold water to<br />
tank bottom to prevent mixing with<br />
heated water<br />
• Anode rod equalizes aggressive water<br />
action for prolonged tank life<br />
• Cold water inlet, hot water outlet, relief<br />
valve and anode rod at top <strong>of</strong> tank for<br />
easy access and fast, economical<br />
installation<br />
• Automatic temperature control<br />
• Over temperature protector<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
DESCRIPTION DIMENSIONS ENERGY INFORMATION<br />
T<br />
MAXIMUM HEIGHT HEIGHT APPROX. APPROX.<br />
Y<br />
P<br />
GAL. WATTAGE DIAMETER HEIGHT TO COLLECTOR TO COLLECTOR SHIP WT. R-<br />
E CAP. MODEL NUMBER UPPER (IN.) (IN) FEED (IN) RETURN (IN) (LBS.) FACTOR<br />
SIDE CONNECT<br />
80 81VR80-1 6000 W 24-1/2 58-3/4 7 37 192 R-17.3<br />
T<br />
A 120 81VR120-1 6000 W 28-1/4 62 7 37 336 R-16.7<br />
LL<br />
80 81VR80-T Storage Only 24-1/2 58-3/4 7 37 192 R-17.3<br />
120 81VR120-T Storage Only 28-1/4 62 7 37 336 R-16.7<br />
TOP CONNECT<br />
80 81VR80TC-1 6000 W 24-1/2 58-3/4 – – 192 R-17.3<br />
T<br />
A 120 81VR120TC-1 6000 W 28-1/4 62 – – 336 R-16.7<br />
LL<br />
80 81VR80TC-T Storage Only 24-1/2 58-3/4 – – 192 R-17.3<br />
120 81VR120TC-T Storage Only 28-1/4 62 – – 336 R-16.7<br />
• All units furnished standard 240 volt AC.<br />
• Units are shipped with a 4500 watt<br />
element. If heating elements <strong>of</strong> different<br />
wattages than those shown are<br />
demanded by zone requirements,<br />
they must be specifically requested.<br />
• Solaraide models meet all current<br />
requirements for solar storage tanks.<br />
• The tanks are <strong>Rheem</strong>glas lined and are<br />
designed to operate up to 150 PSI.<br />
SIDE CONNECT<br />
Raised 7" from the bottom, the<br />
outlet to the solar collector panel<br />
helps prevent scale and<br />
sediment from entering the<br />
circulating through the solar<br />
system.<br />
A special threaded stud is also welded to the tank near<br />
the outlet for attachment <strong>of</strong> tank sensors.<br />
TOP CONNECT<br />
A special threaded stud is also<br />
welded to the tank behind the<br />
lower cavity opening. Low voltage<br />
sensor wire is run from this point<br />
inside the jacket and out the top<br />
for easy control connection.<br />
41
Solaraide HE Solar Heat Exchanger, Solar Tank, or Electric Storage <strong>Water</strong> <strong>Heater</strong><br />
Available in 80 Gallon Models<br />
6-Year Limited Tank and Parts Warranty*<br />
• Brass drain valve<br />
• Choice <strong>of</strong> two models…storage tank or<br />
single element water heater, both specially<br />
equipped for installation with residential<br />
direct solar systems<br />
• Temperature and pressure relief valve<br />
included<br />
• Collector feed and return fittings located at<br />
front <strong>of</strong> tank for convenient installation<br />
• Isolated tank design for better heat<br />
retention<br />
• High efficiency heating element<br />
• <strong>Rheem</strong>glas ® tank lining resists corrosion<br />
and prolongs tank life<br />
• Cold water inlet brings cold water to tank<br />
bottom to prevent mixing with heated<br />
water<br />
• Anode rod equalizes aggressive water<br />
action for prolonged tank life<br />
• Cold water inlet, hot water outlet, relief<br />
valve and anode rod at top <strong>of</strong> tank for<br />
easy access and fast, economical<br />
installation<br />
• Automatic temperature control<br />
• Over temperature protector<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete<br />
warranty information.<br />
®<br />
AN<br />
U®<br />
L<br />
INDEPENDENT LABORATORY<br />
TESTING<br />
FOR PUBLIC SAFETY<br />
DESCRIPTION DIMENSIONS ENERGY INFORMATION<br />
T<br />
Y<br />
P<br />
E<br />
TALL<br />
MAXIMUM HEIGHT HEIGHT APPROX. APPROX.<br />
GAL. WATTAGE DIAMETER HEIGHT TO COLLECTOR TO COLLECTOR SHIP WT. R-<br />
CAP. MODEL NUMBER UPPER (IN.) (IN) FEED (IN) RETURN (IN) (LBS.) FACTOR<br />
80 81V80HE-1 6000 W 24-1/2 58-3/4 6 30 192 R-17.3<br />
80 81V80HE-T Storage only 24-1/2 58-3/4 6 30 192 R-17.3<br />
• <strong>Heater</strong>s furnished standard 240 volt AC.<br />
• Units are shipped with a 4500 watt element. If heating elements <strong>of</strong> different<br />
wattages than those shown are demanded by zone requirements, they must<br />
be specifically requested.<br />
• To prevent corrosion, proper pH levels in transfer fluid must be maintained.<br />
• Solaraide models meet all current state requirements for solar storage tanks.<br />
• The tanks are <strong>Rheem</strong>glas lined and are designed to operate up to 150 PSI.<br />
A special 1/2" NPT opening<br />
is provided for installation <strong>of</strong> a<br />
“probe type” thermostat.<br />
COPPER COIL DATA (Type L Copper)<br />
Maximum pressure = 150 psi<br />
Maximum temperature = 185°F.<br />
Tube I.D. = 5/8"<br />
Solaraide HE Coil Capacity Length <strong>of</strong> Tubing<br />
Tank Capacity Gallons Around Tank (Ft)<br />
80 Gallons 2.2 120<br />
PRESSURE DROP THROUGH COIL (Feet <strong>of</strong> H20)<br />
Head Loss (Feet)<br />
Flow Rate<br />
80 Gallon<br />
1 GPM 1.3<br />
2 GPM 4.8<br />
3 GPM 10.0<br />
43
ProtectionPlus 4 Year Limited Warranty Extension Kit<br />
The best water heater warranty in the industry comes in the smallest box!<br />
Part Number: SP20079 (Sold only in 6 package quantity)<br />
For use on <strong>Rheem</strong> ® <strong>Residential</strong> Fury, Pr<strong>of</strong>essional, PowerVent and Direct Vent models*<br />
• Kit contains:<br />
High quality magnesium anode rod with plastic lined nipple (hot side)<br />
Plastic lined nipple (cold side)<br />
Warranty certificate with installation instructions<br />
ProtectionPlus label for heater<br />
• Provides up to 135% additional anodic protection<br />
• With just two water heaters, you have the option <strong>of</strong><br />
selling four warranty periods<br />
• Effectively have four water heaters in little more<br />
space than two<br />
* Not for use on: Warrior, Warrior DV, Marathon, Point-<strong>of</strong>-Use,<br />
or Table Top models.<br />
Lifeguard Electric Element<br />
6<br />
8<br />
BECOMES10<br />
BECOMES12<br />
Y E A R L I M I T E D<br />
TANK WARRANTY<br />
Y E A R L I M I T E D<br />
TANK WARRANTY<br />
44<br />
High density nichrome wire electric<br />
heating filament; best grade A, 80/20<br />
nichrome wire made…for top<br />
performance and long-life operation.<br />
High-grade magnesium oxide<br />
packing moves the heat<br />
quickly to the element’s<br />
surface, protecting the<br />
nichrome wire filament and<br />
boosting efficiency.<br />
Designed for the future, the LIFEGUARD electric water heater<br />
element is as close to a lifetime element as space-age technology<br />
can produce*.<br />
Patented resistor design** helps prolong anode rod and tank life…<br />
A <strong>Rheem</strong> Exclusive!<br />
* See <strong>Residential</strong> Warranty Information Brochure for complete warranty information.<br />
** Registered trade-mark <strong>of</strong> International Nickel Co.<br />
Steel screw-in head<br />
provides solid construction<br />
and ease <strong>of</strong> maintenance.<br />
INCOLOY ® 840 stainless steel sheath,<br />
resists water chemical corrosion and<br />
burn-out even in air or sediment for<br />
long element life, long life performance.<br />
Low watt density design delivers<br />
full watt-rated heating power to a<br />
larger surface area, eliminating<br />
high heat concentrations and<br />
prolonging element life.<br />
45
EverKleen <br />
• Fights Sediment Build-Up<br />
• Helps Preserve Operating Efficiency<br />
• Helps Improve Tank Life<br />
• Provides Increased Deliverability<br />
Sediment build-up in a water heater creates layers <strong>of</strong> non-conducting material between the<br />
water and the energy that heats the water. This causes a reduction <strong>of</strong> heat transfer which<br />
increases tank bottom temperatures and decreases water temperatures. When this occurs,<br />
the results are decreased water heater efficiency and decreased tank life.<br />
The EverKleen system helps to dislodge this sediment by channeling water through a specially developed inlet tube. This tube<br />
creates a high-velocity spiraling water stream which strikes the bottom <strong>of</strong> the water heater tank with sediment “busting” force.<br />
The spiraling effect also creates better mixing throughout the water heater tank which reduces the effects <strong>of</strong> stacking. Stacking<br />
occurs when frequent small draws <strong>of</strong> water create different temperatures throughout the tank resulting in increased peak<br />
temperatures at the top <strong>of</strong> the tank. The EverKleen system greatly reduces peak temperatures, thus increases first hour<br />
deliverability.<br />
Included at no extra charge on all <strong>Rheem</strong> Fury and Pr<strong>of</strong>essional models.<br />
46<br />
Accessories<br />
CATCH PAN KIT<br />
Available in 5 sizes to help protect any installation area<br />
from possible water damage. Each 2" deep drain pan is<br />
manufactured <strong>of</strong> aluminum and fitted with a 1" drain outlet.<br />
Provides that extra level <strong>of</strong> “protection assurance” that<br />
many homeowners and apartment dwellers are looking for.<br />
Available in 18", 20", 22", 24",<br />
and 26 1 ⁄2" diameters. Our<br />
specially designed,<br />
tapered side wall<br />
allows for “oneinside-the-other”<br />
stacking and<br />
minimal storage<br />
area. Available with<br />
side drain outlet.<br />
WALL MOUNTING KIT<br />
For Point-<strong>of</strong>-Use Electric <strong>Water</strong> <strong>Heater</strong>s<br />
This wall mounting kit for point-<strong>of</strong>-use electric water<br />
heater installations provides an easy way to mount the<br />
unit <strong>of</strong>f the floor, out <strong>of</strong> the<br />
way for more usable floor<br />
space in a small area. It’s<br />
been designed for use with<br />
6, 10, 15, and 20 gallon<br />
models (AS-36111) and all<br />
walls with 16" stud centers.<br />
All necessary parts are<br />
included in this easy to install,<br />
time-and-money saving kit.<br />
Catch pan must conform<br />
to local codes.<br />
47
Therm-X-Guard Thermal Expansion Tanks<br />
Eliminates problems associated<br />
with thermal expansion in closed<br />
loop systems.<br />
• 5 year limited tank warranty<br />
• Suitable for water heaters up to<br />
120 gallon capacity and supply<br />
pressure to 80 PSI.<br />
B<br />
B<br />
MODELS: RRT-5, RRT-12<br />
MODEL: RRT-25<br />
Model<br />
Number*<br />
RRT-50<br />
RRT-12<br />
RRT-25<br />
Maximum Operating Conditions<br />
Operating Working<br />
Temperature Pressure (PSIG)<br />
200°F (93°C) 150 (10.5 kg/cm 2 )<br />
200°F (93°C) 150 (10.5 kg/cm 2 )<br />
200°F (93°C) 150 (10.5 kg/cm 2 )<br />
(Vt) Total<br />
Volume<br />
(Gallons)<br />
2.0<br />
4.4<br />
10.3<br />
Diameter<br />
(A)<br />
08"<br />
11"<br />
15 3 ⁄8"<br />
Height<br />
(B)<br />
12 5 ⁄8"<br />
15"<br />
15 1 ⁄4"<br />
System<br />
Connection<br />
3<br />
⁄4" NPTM – BRASS<br />
3<br />
⁄4" NPTM – BRASS<br />
1" NPTF – BRASS<br />
Standard Factory<br />
Pre-charge<br />
40 PSIG (2.8 kg/cm 2 )<br />
40 PSIG (2.8 kg/cm 2 )<br />
40 PSIG (2.8 kg/cm 2 )<br />
Diaphragm<br />
Material<br />
Butyl Rubber<br />
Butyl Rubber<br />
Butyl Rubber<br />
Liner<br />
Material<br />
Polypropylene<br />
Polypropylene<br />
Polypropylene<br />
48