Biography - Thailand Automotive Institute
Biography - Thailand Automotive Institute
Biography - Thailand Automotive Institute
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Development of Natural Gas Engine for Heavy Duty Truck<br />
Mr. Chakrit Jailor<br />
Chief of Medium Duty Truck Division,<br />
Commercial Vehicle Product Planning & Engineering Department, Isuzu Technical Center of Asia Co.,Ltd.<br />
E-mail: chakrit_jailor@ita.isuzu.co.jp<br />
Abstracts<br />
The increase of diesel price had a big affect on the transportation industry that operated primary by using<br />
diesel engine. Thus the adjustment of diesel engine for the renewable or alternative energy was focused in<br />
order to be the way to reduce expenses. Natural gas was the outstanding alternative energy that Isuzu<br />
researched to use for the regular diesel engine. The methodology of Isuzu diesel engine development for<br />
efficient use with natural gas (dedicated or mono gas system engine) was firstly to tune up the engine<br />
compression ratio, secondly to renew the intake system, thirdly to install the fuel control system as well as<br />
exhaust-gas control system.<br />
The only natural gas-used Isuzu engine was officially experimented in Thai transportation industry in 2007.<br />
The prototype vehicle, in which natural gas-used Isuzu engine was assembled, was produced as the Bangkok<br />
Mass Transit Authority’s bus. The bus was experimentally used in the daily regular operation, whereas the gas<br />
control system was tuned up especially for Thai gas.<br />
The experimental result was satisfied both energy consumption ratio and driving efficiency. As a<br />
consequence, the achievement brought about the production of Isuzu’s heavy duty trucks which started<br />
marketing on 2008.<br />
<strong>Biography</strong><br />
Mr. Chakrit Jailor is the chief engineer of the Medium Heavy Duty Truck Division,<br />
Commercial Vehicle Product Planning & Engineering Department, Isuzu Technical<br />
Center of Asia Co.,Ltd. He has a B.Eng degree in Mechanical Engineering from the<br />
Faculty of Engineering, Khonkaen University. Mr.Chakrit also succeeded 3-years<br />
Engineering Apprenticeship Programme from Isuzu Motors, Kawasaki, Japan.<br />
Organized by:<br />
30