On-line technical support - CET

Kingman: Technical Tips 

ON-LINE TECHNICAL SUPPORT 

Kingman helps solve your most common problems and answers the most often asked questions. 

Re-cocking problems Sputtering Air Leaks 

Multiple Ball Feeding Ball Breaks Low and High Velocity 

Kingman paintball marker diagrams and parts list: 

New Hammer 

Spyder 

Spyder One 

Spyder Compact 2000 

Spyder Special Edition 

Spyder Special Edition(Compact) 

Spyder Tournament Level (TL) 

Spyder Tournament Level (TL) Plus 

Spyder Elite 

Spyder Compact A 

Spyder Compact P 

Re-cocking problems 

1. Broken or Missing #19 Striker O-ring. Why 

a. Air escapes causing pressure to be too low to re-cock. 

2. Wrong o-ring. Why 

a. An o-ring other than a Kingman striker o-ring might be a different size or material and may not work properly. The 

correct o-ring should be loose.(Note: Tank o-rings will not function properly when used on the striker!) 

3. Broken paintball. Why 

a. Shell fragment gets caught between the #17 bolt and the receiver. 

4. Striker Buffer. Why 

a. If the #26 striker buffer has been installed in front of the #18 striker or is damaged, the gun will not re-cock. 

Sputtering 

1. Broken or missing striker o-ring. Why 

a. Air escapes causing pressure to be too low. 

2. Worn sear spring. Why 

a. The sear is not engaging the striker. 

http://www.kingmanusa.com/techtip.htm (1 of 3) [9/12/2000 2:48:20 PM]


3. CO2 tank. Why 

a. If your tank has just been filled, it is cold and the pressure is low. Let the tank warm up. 

b. Tank is empty or low, causing pressure to drop. 

Air Leaks 

1. Damaged #12 Cup Seal. Why 

a. When the cup seal is damaged (scratched, nicked, etc.), no matter how small the damage is, the CO2 will escape 

causing the gun to leak down the barrel. 

2. Damaged or improperly installed #14 valve body. Why 

a. As with the cup seal; any and all damage (scratched, nicked, metal burrs, etc.) to the valve body, no matter how 

small, will cause CO2 to escape. 

b. If the valve body is installed backwards (The smaller cone shaped hole should face the back of the marker, not the 

front), the CO2 will escape. 

CAUTION!: EXTRA CARE IS NEEDED WHEN HANDLING THE VALVE BODY! DO NOT REMOVE 

UNLESS SPECIFIC SERVICE IS REQUIRED. THE VALVE BODY SCREW MUST BE REMOVED BEFORE 

THE VALVE BODY CAN BE EXTRACTED. THE USE OF A SCREWDRIVER OR OTHER METAL OBJECT TO 

REMOVE THE VALVE BODY WILL RESULT IN IRREPARIABLE DAMAGE! USE THE ERASER END OF A 

PENCIL OR OTHER NON-METAL STICK TO SLOWLY PUSH THE VALVE BODY OUT OF THE RECEIVER. 

3. Damaged, missing or wrong tank o-ring. Why 

a. CO2 will leak from the C/A adapter without proper seal. 

Multiple Ball Feeding 

1. Missing, Worn or Broken #3 Ball Stopper. Why 

a. Without a good ball stopper the balls can load continuously, there's nothing to stop them. 

Ball Breaks 

1. Old or Poor Quality Paintballs. Why 

a. Paintballs have a limited shelf life and must be stored properly. If balls have dimples they need to be exposed to air 

prior to use. 

b. Lessor quality paintballs have thinner shells and will break more easily. 

2. Picking-up Liquid CO2. Why 

a. When liquid CO2 enters the gun, it forms ice crystals (snow) these crystals will cause ball breaks. (Note: An 

expansion chamber, anti-siphon tube or a remote system will solve this problem.) 

3. Short Stroking. What is it The gun will fire as quick as you can pull the trigger, however if you do not allow the 

bolt to fully re-cock, it will chop the next ball. 

4. Gun Needs Cleaning. Why 



a. If shell fragments are left inside the gun they will cause more breaks. 

5. Weather Conditions. Why 

a. Extreme cold weather will cause paintballs to become fragile. 

6. High Velocity. Why 

a. Too much pressure on the paintball will cause it to collapse. 

Low Velocity 

To adjust velocity higher, turn the velocity adjuster screw clockwise. 

1. Striker Spring. Why 

a. If the striker spring is too short the velocity will be low. Replace with longer spring or add a spacer between the flat 

disc and the adjust screw. 

b. A cold tank will cause a drop in velocity. CO2 can not maintain steady 

pressure under very cold conditions. 

2. Venturi Bolt. Why 

a. If the venturi bolt has been installed upside down, the pressure will be extremely low. The balls will not travel very 

far possibly even dropping to the ground a couple feet away. 

High Velocity 

To adjust velocity lower, turn the velocity adjust screw counter clockwise. 

1.Striker Spring. Why 

a. If the striker spring is too long the velocity will be high. Cut one (1) coil off. Test. If the velocity is still too high cut 

¼ of a coil at a time until the desired velocity is achieved. 

2. Hot Weather or Over Heated Tank. Why 

a. Extreme heat or a hot tank will produce more pressure than needed. 

ASK OUR TECHS! If you have any other specific technical questions about your Kingman paintball markers, 

e-mail us at tech@kingmanusa.com 

Contact us: 

Info@KingmanUSA.com 

Spyder Series Hammer Series Accessories Miscellaneous 

Technical Tips Company/News Links Authorized Dealers 

Kingman International Corp. 

9480 Telstar Ave. #2, El Monte, CA 91731, USA. Tel: 626.575.8777 Fax: 626.575.8798 


Kingman: Technical Tips: Gun Diagrams: New Hammer 

Technical Diagrams 


New Hammer 

Spyder 







Spyder Elite 



New Hammer 

1. BARREL PLUG 

P01. 9-1/2" BARREL (BLACK) 

P02. PUMMP HANDLE 

P03. PUMP SCREW 

P04C. RECEIVER (SILVER) 

P05. SIGHT RAIL (BLACK) 

P05A. SIGHT RAIL SCREW 

P07. BOLT (VENTURI) 

P08. STRIKER SPRING 

P09A. HAMMER 

P10. POWER TRAIN (POWER TUBE) 

P11. BOLT-O-RING *112 

P12. POWER TRAIN GUIDE 

P13. CUP SEAL 

P14. VALVE SPRING 

P15. C/A ADAPTER (BLACK) 

P16B. M-4 SCREW (FRONT) 

P16C. M-5 SCREW (BACK) 

P17. TRIGGER 

P18. TRIGGER SPRING 

P18A. TRIGGER SPRING PIN 

P19. SAFETY BUTTON 

P22. TRIGGER FRAME W/45 GRIP 

40A. POWERFEED PLUG 

P13A. CUP SEAL GUIDE 

http://www.kingmanusa.com/di_nham.htm (1 of 2) [9/12/2000 2:48:32 PM]

Kingman: Technical Tips: Gun Diagrams: New Hammer 

Contact us: 

info@KingmanUSA.com 


Technical Tips Company/News Links 



http://www.kingmanusa.com/di_nham.htm (2 of 2) [9/12/2000 2:48:32 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder 



New Hammer 

Spyder 







Spyder Elite 



Spyder 

1 MUZZLE PLUG 

2 BARREL 

3 BALL STOPPER 

4B DETENT COVER 

5A M4 X 6 SCREW 

6H RECEIVER 

8L LOW PRESSURE CHAMBER 

9 O-RING #015 80D 

10 VALVE SPRING 

11 CUP SEAL GUIDE 

12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 

15 VALVE BODY SCREW 

16 SCREW M5 X 12 WITH WASHER 

17A VENTURI BOLT 

18 STRIKER 

19 STRIKER O-RING 

20 BARREL O-RING 

23 BOLT PLUG 

24 SCREW M4 X 12 

25 STRIKER SPRING 

26 STRIKER BUFFER 

27 STRIKER SPRING GUIDE 

27A FLAT DISC 

28 STRIKER PLUG 

29 ADJUSTER SCREW 

30 STRIKER PLUG SCREW 

31 FRAME & TRIGGER ASSEMBLY 

32 M16 GRIP 

33 RACK 

34 SCREW 1/4" X 1" WITH WASHER 

35 C/A ADAPTER 

36C SCREW 5/32" X 7/8" WITH WASHER 

37 DISCONNECT HOSE 

37B FILTER 

37C #011 O-RING 

38A SAFETY BUTTON 

http://www.kingmanusa.com/di_spy.htm (1 of 2) [9/12/2000 2:48:50 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder 

21 BOLT PIN 

22 BOLT SCREW 

Contact us: 


39 STRIKER KNOB 

5813 RAISED MINI SIGHT RAIL 





http://www.kingmanusa.com/di_spy.htm (2 of 2) [9/12/2000 2:48:50 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder One 



New Hammer 

Spyder 







Spyder Elite 




1 MUZZLE PLUG 

2 9 1/2" MUZZLE BRAKE BARREL 


4B DETENT COVER (PLASTIC) SHORT 

5A M4X6 SCREW (DETENT SCREW) 

6 RECEIVER (SPYDER ONE) SILVER 

6A RECEIVER (SPYDER ONE) BLACK 

8 RESERVOIR PLUG 

9 O-RING #015 80D 

10 VALVE SPRING (SPYDER) 


12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 

14A VALVE BODY ROLL PIN 


16A M5X12.5 SCREW (TRIGGER FRAME) 

17A SECOND GENERATION BOLT WITH VENTURI 

18A STRIKER (SPYDER ONE) 

19A STRIKER O-RING (SPYDER ONE) 

30 M5X8 SCREW (STRIKER PLUG) 

31B SEAR 

31E SEAR SPRING 

31F TRIGGER SPRING 

31G TRIGGER (ONE PIECE) 

31J SPYDER ONE TRIGGER FRAME WITH 45 GRIP 

33A RUBBER GRIP COVER (2) (SMALL) 

33C GRIP COVER SCREW SMALL 

33F NUT SCREW INSERT FOR 45 GRIP FRAME 


36C 5/32" X 7/8" SCREW (ELITE & SPYDER ONE) 


37A FILTER O-RING 

37B AIR FILTER 

37C DISCONNECT O-RING 

37D PLASTIC WASHER (DISC. HOSE) 

38 SAFETY BUTTON SET(LARGE) INCL BALL BEARING 

& SPRING 

38B BALL BEARING & SPRING 


http://www.kingmanusa.com/di_one.htm (1 of 2) [9/12/2000 2:49:09 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder One 


21 BOLT PIN 

22 BOLT SCREW 

23 BOLT PLUG 

24 SIGHT RAIL SCREW 


26A STRIKER BUFFER (SPYDER ONE) 


27A FLAT DISC 


29 ADJUST SCREW 

40 POWERFEED PLUG 

41A SPARE PARTS KIT (SPYDER ONE/COMPACT) 

42 MALE TO MALE ADAPTER 

47 SIGHT RAIL (BLACK) 

48 ROLL PIN (LARGE) 

49 ROLL PIN (MEDIUM) 

49A ROLL PIN (SMALL) 

50 AMMO BOX (45 RD) 

52 ALLEN SCREW WRENCH (MEDIUM) 

53 ALLEN SCREW WRENCH (LARGE) 

54 ELBOW 7/8" W/HOSE CLAMPS 

Contact us: 






http://www.kingmanusa.com/di_one.htm (2 of 2) [9/12/2000 2:49:09 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Compact 2000 



New Hammer 

Spyder 







Spyder Elite 




1 MUZZLE PLUG 

2 BARREL 



5A M4 x 6 SCREW 

6B RECEIVER 

7 M5 x 14 SCREW with WASHER 

8I LOW PRESSURE CHAMBER 

8J VERTICAL ADAPTER 

9 O-RING #015 80D 

10A VALVE SPRING 


12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 



16A SCREW M5 x 12 with WASHER 

17A VENTURI BOLT 

18A STRIKER 

19A STRIKER O-RING 


21 BOLT PIN 

22 BOLT SCREW 

23 BOLT PLUG 

24 SCREW M4X12 


26A STRIKER BUFFER 


27 FLAT DISC 

28B STRIKER PLUG 


30 M5X8 SCREW with WASHER 

31U FRAME & DOUBLE TRIGGER ASSEMBLY 

33A 45 GRIP COVER 

33C 45 GRIP COVER SCREW 

38 SAFETY BUTTON 


5813 RAISED MINI SIGHT RAIL 

5814 DOUBLE TRIGGER 

http://www.kingmanusa.com/di_com2k.htm (1 of 2) [9/12/2000 2:49:27 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Compact 2000 

Contact us: 






http://www.kingmanusa.com/di_com2k.htm (2 of 2) [9/12/2000 2:49:27 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Special Edition 



New Hammer 

Spyder 







Spyder Elite 




1 MUZZLE PLUG 

2A 9 1/2" MUZZLE BRAKE BARREL (S.E.) 


4E DETENT COVER (REG.) S.E. 

5 M4X6 SCREW (DETENT SCREW) 

6E RECEIVER (S.E. SPYDER) 

8E RESERVOIR PLUG (S.E.) 

9 O-RING #015 80D 

10 VALVE SPRING (SPYDER) 


12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 



16 M5X12 SCREW (TRIGGER FRAME) 


31H DOUBLE TRIGGER (BLACK) 

31N SPYDER/COMPACT S.E. TRIGGER FRAME 

W/ASSEMBLY 

32B 45 GRIP FRAME (S.E.) 

33A RUBBER GRIP COV (2) COMP/ELITE/S.E./SPY ONE 

(SMALL) 

33C GRIP COVER SCREW (COMPACT/ELITE/S.E./SPYDER 

ONE) SMALL 

33E NUT SCREW INSERT FOR 45 GRIP FRAME OR RACK 

34A 1/4" X 5/8" SCREW 

35A C/A ADAPTER (S.E.) 

36A 5/32" X 1" SCREW (S.E. C/A ADAPTER) 

36B 5/32" X 1 1/4" SCREW (S.E. C/A ADAPTER) 



http://www.kingmanusa.com/di_se.htm (1 of 2) [9/12/2000 2:49:44 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Special Edition 

16B FRAME SCREW WASHER 

17B TURBULENCE BOLT 

18 STRIKER 



21 BOLT PIN 

22 BOLT SCREW 

23A BOLT PLUG (S.E.) 





27A FLAT DISC 

28A STRIKER PLUG (S.E.) 

29A ADJUST SCREW W/ THUMB ADJUSTER (S.E.) 

29B LOCK SCREW (S.E.) 

30A STRIKER PLUG SCREW (S.E.) 

31B SEAR 


37C HARD LINE HOSE O-RING 



& SPRING 


39A STRIKER KNOB (S.E.) BLACK 


41D SPARE PARTS KIT (S.E.) 


43A DISCONNECT HOSE (S.E. SPYDER) 

43B O-RING #011 (S.E.) 

44A SPYDER EXPANSION CHAMBER (S.E.) 

45 SHROUD W/ SCREW 

45A M4X4 SCREW (SHROUD & EXP CHAMBER) 

46 PLASTIC WEDGE 

47C DELUXE SIGHT RAIL (S.E.) 




51 ALLEN SCREW WRENCH (SMALL) 


Contact us: 






http://www.kingmanusa.com/di_se.htm (2 of 2) [9/12/2000 2:49:44 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Special Edition(Compact) 



New Hammer 

Spyder 







Spyder Elite 



Spyder Special Edition (Compact) 

1 MUZZLE PLUG 

2A 9 1/2" MUZZLE BRAKE BARREL (S.E.) 


4E DETENT COVER (REGULAR) 


6D RECEIVER (S.E. COMPACT) 

7 M5X14 SCREW W/WASHER (1 HOLE) 

8D VERTICAL ADAPTER (S.E.) 

9 O-RING #015 80D 

10A VALVE SPRING (COMPACT & ELITE) 


12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 




31B SEAR 



31H DOUBLE TRIGGER (BLACK) 

31N SPYDER/COMPACT S.E. TRIGGER FRAME 

W/ASSEMBLY 

32B 45 GRIP FRAME (S.E.) 

33A RUBBER GRIP COV (2) COMP/ELITE/S.E./SPY ONE 

(SMALL) 

33C GRIP COVER SCREW (COMP/ELITE/S.E./SPY ONE) 

SMALL 

33E NUT SCREW INSERT FOR 45 GRIP FRAME OR RACK 

34A 1/4" X 5/8" SCREW 

35A C/A ADAPTER (S.E.) 

36A 5/32" X 1" SCREW (S.E. C/A ADAPTER) 

36B 5/32" X 1 1/4" SCREW (S.E. C/A ADAPTER) 


http://www.kingmanusa.com/di_sec.htm (1 of 2) [9/12/2000 2:50:01 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Special Edition(Compact) 



18 STRIKER 



21 BOLT PIN 

22 BOLT SCREW 

23A BOLT PLUG (S.E.) 





27A FLAT DISC 

28A STRIKER PLUG (S.E.) 

29A ADJUST SCREW W/ THUMB ADJUSTER (S.E.) 

29B LOCK SCREW (S.E.) 

30A STRIKER PLUG SCREW (S.E.) 


37C O-RING #011 (S.E.) 


& SPRING 


39A STRIKER KNOB (S.E.) BLACK 


41D SPARE PARTS KIT (S.E.) 

43 DISCONNECT HOSE (S.E. COMPACT) 

44 COMPACT EXPANSION CHAMBER (S.E.) 

45 SHROUD W/ SCREW 

45A M4X4 SCREW (SHROUD & EXP CHAMBER) 

46 PLASTIC WEDGE 

47C DELUXE SIGHT RAIL (S.E.) 




51 ALLEN SCREW WRENCH (SMALL) 


Contact us: 






http://www.kingmanusa.com/di_sec.htm (2 of 2) [9/12/2000 2:50:01 PM]

Kingman: Technical Tips: Gun Diagrams: TL 



New Hammer 

Spyder 







Spyder Elite 




1. MUZZLE PLUG 

2E. BARREL 

3. BALL STOPPER 

4C. DETENT COVER 

5A. M4 X 6 SCREW 

6N. RECEIVER 

7. M5 X 14 SCREW WITH WASHER 

8G. TL VERTICAL ADAPTER 

9. O-RING #015 80D 

10A. VALVE SPRING 

11. CUP SEAL GUIDE 

12. CUP SEAL 

13. VALVE PIN 

14. VALVE BODY 

15. VALVE BODY SCREW 

16. SCREW M5 X 12 WITH WASHER 

17C. REAR COCKING VENTURI BOLT 

18B. STRIKER 

25. STRIKER SPRING 

26A. STRIKER BUFFER 

27. STRIKER SPRING GUIDE 

28C. T-STRIKER PLUG 

29C. THUMB ADJUSTER 

29B. LOCK SCREW 

31R. FRAME & TRIGGER ASSEMBLY 

42A. MALE TO MALE ADAPTER 

33A. 45 GRIP COVER 

37D. PLASTIC WASHER 

27A. FLAT DISC 

33C. 45 GRIP COVER SCREW 

35B. C/A ADAPTER 

36C. 5/32" X 7/8" SCREW W/WASHER 

38A. SAFETY BUTTON 

31S. TRIGGER 

37B. FILTER 

8H. LOW PRESSURE CHAMBER 

http://www.kingmanusa.com/di_tl.htm (1 of 2) [9/12/2000 2:50:19 PM]

Kingman: Technical Tips: Gun Diagrams: TL 

19A. STRIKER O-RING 

47D. DELUXE SIGHT RAIL W/BEAVER TAIL 

21. BOLT PIN 

22. BOLT SCREW 

23B. QUICK DISCONNECT PIN 

23C. DISCONNECT PIN LOCK 


37E. DISCONNECT HOSE 

45A. M4 X 4 SHROUD SCREW 

45B. SHROUD 

37C. O-RING #011 

44D. FORE GRIP 

9A. O-RING #018 

Contact us: 






http://www.kingmanusa.com/di_tl.htm (2 of 2) [9/12/2000 2:50:19 PM]

Kingman: Technical Tips: Gun Diagrams: TL Plus 



New Hammer 

Spyder 







Spyder Elite 




http://www.kingmanusa.com/di_tlp.htm (1 of 2) [9/12/2000 2:50:40 PM]

Kingman: Technical Tips: Gun Diagrams: TL Plus 

1. MUZZLE PLUG 

2E. BARREL 

3. BALL STOPPER 

4C. DETENT COVER 


6N. RECEIVER 

7. M5 X 14 SCREW W/WASHER 

8I. LOW PRESSURE CHAMBER 

8J. VERTICAL ADAPTER 

9. O-RING #015 80D 

10A. VALVE SPRING 

11. CUP SEAL GUIDE 

12. CUP SEAL 

13. VALVE PIN 

14. VALVE BODY 

15. VALVE BODY SCREW 

16. SCREW M5 X 12 W/WASHER 

17C. REAL COCKING VENTURI BOLT 

18B. STRIKER 

19A. STRIKER O-RING 

20. BARREL O-RING 

21. BOLT PIN 

22. BOLT SCREW 

23B. QUICK DISCONNECT PIN 

23C. DINCONNECT PIN LOCK 

25. STRIKER SPRING 

26A. STRIKER BUFFER 

27. STRIKER SPRING GUIDE 

27A. FLAT DISC 

28C. T-STRIKER PLUG 

29B. LOCK SCREW 

29C. THUMB ADJUSTER 

31T. FRAME & DOUBLE TRIGGER ASSEMBLY 

33A. 45 GRIP COVER 

33C. 45 GRIP COVER SCREW 

35B. C/A ADAPTOR 

36C. 5/32" X 7/8" SCREW W/WASHER 

37B. FILTER 

37C. O-RING #011 

37D. PLASTIC WASHER 

37F. DISCONNECT HOSE 

38A. SAFETY BUTTON 

42. MALE TO MALE ADAPTOR 

44E. MODEL S EXPANSION CHAMBER 

44F. MINI FORE GRIP 

45A. M4 X 4 SHROUD SCREW 

45B. SHROUD 

47D. DELUXE SIGHT RAIL W/BEAVER TAIL 

5814. DOUBLE TRIGGER 

Contact us: 






http://www.kingmanusa.com/di_tlp.htm (2 of 2) [9/12/2000 2:50:40 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Elite 


Kingman gun diagrams and parts list: 

New Hammer 

Spyder 







Spyder Elite 



Spyder Elite 

1 MUZZLE PLUG 


4A DETENT COVER (METAL) REG. 


6J RECEIVER (COMPACT-A & ELITE) SILVER 

7 M5X14 SCREW W/WASHER (1 HOLE) / COMP-P 

TRIGGER FRAME 

8A VERTICAL ADAPTER (ONE HOLE) 

8B RESERVOIR PLUG W/ MALE TO MALE ADAPTER 

9 O-RING #015 80D 



12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 



31B SEAR 




31M ELITE TRIGGER FRAME W/ASSEMBLY 

32A 45 GRIP FRAME (ELITE) 

33A RUBBER GRIP COV (2) COMP/ELITE/S.E./SPYDER 

ONE (SMALL) 

33C GRIP COVER SCREW (COMPACT/ELITE/S.E./SPYDER 

ONE) SMALL 

33F NUT SCREW INSERT FOR 45 GRIP FRAME (ELITE & 

SPYDER ONE) 

34A 1/4" X 5/8" SCREW 


36C 5/32" X 7/8" SCREW (ELITE & SPYDER ONE) 

http://www.kingmanusa.com/di_elite.htm (1 of 2) [9/12/2000 2:51:05 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Elite 





18 STRIKER 



21 BOLT PIN 

22 BOLT SCREW 

23 BOLT PLUG 





27A FLAT DISC 






37C DISCONNECT O-RING 



& SPRING 




41C SPARE PARTS KIT (ELITE) 










Contact us: 






http://www.kingmanusa.com/di_elite.htm (2 of 2) [9/12/2000 2:51:05 PM]

Kingman: Technical Tips: Gun Diagrams: Compact A 



New Hammer 

Spyder 







Spyder Elite 




1 MUZZLE PLUG 



4 DETENT COVER (PLASTIC) REG. 

5A M4X6 SCREW (DETENT SCREW)(BH) 

6J RECEIVER (COMPACT-A & ELITE) SILVER 

7 M5X14 SCREW W/WASHER (1 HOLE) / COMP-P TRIG 

FRAME 


9 O-RING #015 80D 



12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 





27A FLAT DISC 




31B SEAR 




31L COMPACT-A TRIGGER FRAME W/ASSEMBLY 

32C M-16 GRIP 

32D M-16 TRAP DOOR COVER 

34A 1/4" X 5/8" SCREW 

38 SAFETY BUTTON SET(LARGE) INCL. BALL BEARING 

& SPRIING 


http://www.kingmanusa.com/di_coma.htm (1 of 2) [9/12/2000 2:51:31 PM]

Kingman: Technical Tips: Gun Diagrams: Compact A 



17A SECOND GENERATION BOLT WITH VENTURI 

18 STRIKER 



21 BOLT PIN 

22 BOLT SCREW 

23 BOLT PLUG 





41 SPARE PARTS KIT (SPYDER) 









Contact us: 






http://www.kingmanusa.com/di_coma.htm (2 of 2) [9/12/2000 2:51:31 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Compact P 



New Hammer 

Spyder 







Spyder Elite 




1 MUZZLE PLUG 




5A M4 X 6 SCREW 

6B RECEIVER (SILVER) 

6C RECEIVER (BLACK) 

7 M5 X 14 SCREW WITH WASHER 


9 O-RING #015 80D 

10A VALVE SPRING 


12 CUP SEAL 

13 VALVE PIN 

14 VALVE BODY 



16A SCREW M5 X 12 WITH WASHER (TRIGGER FRAME) 

17A SECOND GENERATION VENTURI BOLT 

18A STRIKER 

19A STRIKER O-RING 


21 BOLT PIN 


27A FLAT DISC 

28B STRIKER PLUG 


30 M5X8 SCREW WITH WASHER 

31B SEAR 




31K COMPACT-P TRIGGER FRAME W/45 GRIP 

33A 45 GRIP COVER 

33C 45 GRIP COVER SCREW 

38 SAFETY BUTTON 




41 SPARE PARTS KIT (SPYDER) 

47 SIGHT RAIL 






http://www.kingmanusa.com/di_comp.htm (1 of 2) [9/12/2000 2:52:02 PM]

Kingman: Technical Tips: Gun Diagrams: Spyder Compact P 

22 BOLT SCREW 

23 BOLT PLUG 

24 SCREW M4X12 


26A STRIKER BUFFER 


54 ELBOW 7/8" W/HOLE CLAMPS 

Contact us: 






http://www.kingmanusa.com/di_comp.htm (2 of 2) [9/12/2000 2:52:02 PM]

On-line technical support - CET

Create successful ePaper yourself

Delete template?

Save as template?