J-Flash ARM User Guide - SEGGER Microcontroller

18 CHAPTER 2 Licensing
2.2.2 Key-based license
When using a key-based license, a license key is required in order to unlock the full
potential of J-Flash. License keys can be added via the J-Flash license management.
To get to the J-Flash license management just select Licenses... from the Help menu
of the main window. Like the built-in license, the key-based license is only valid for
one J-Link, so if another J-Link is used it needs a separate license.
2.2.2.1 The serial number
The licensing dialog contains a button Display serial number. J-Flash tries to read the
serial number of a connected J-Link if you press this button.
2.2.2.2 License management
The licensing dialog contains buttons to add and remove license keys. After you
received a key from us, click on Add license to unlock J-Flash. Depending on the
license you requested you are free to use J-Flash either for an unlimited or limited
period of time. Enter the key into the Add license dialog and click OK to submit.
J-Flash ARM (UM08003) © 2004-2012 SEGGER Microcontroller GmbH & Co. KG