FURUTEC - Konia Group

SPECIFICATION & STANDARDS
General
Furutec busduct system is designed to meet the requirement of commercial,
industrial and residential applications. It carries up to 6000A with reduced
energy losses and heat.
Furutec busduct system is known for:
1) Low current density in its class
2) Flexible and modular in design
3) Occupying lesser space
4) Fast installation and lower installation cost and easy maintenance
5) Lower voltage drop and higher short-circuit ratings
6) Good electro-magnetic shielding
7) Fire resistance and non-flammable propagation
8) Flexibility for future expansion
9) Strong mechanical strength, high degree of protection and applicable
for large span installation
Design Standards
Furutec busduct system is designed and manufactured in accordance to the
following international standards:
IEC 60439-2 Particular Requirements for Busbar Trunking System (Busway)
IEC 60439-1 Low Voltage Switchgear and Controlgear Assemblies
JIS C 8364 Japanese Industrial Standards for Busways
IEC 60529:2001 Degree of Ingress Protection
BS 6387:1994 Performance Requirements for Cables required to
Maintain Circuitry Integrity under Fire Conditions (Adoption)
JIS A 1304 Method of Fire Resistance Test for Structural Parts of Buildings
BS 5486:Part 2
NEMA BU1
IEC60331 (Adoption)
System Voltage & Rated Current
The maximum operating voltage of Furutec busduct is 660V. The rated current of
HP-Busduct is from 600A to 6000A and L-Duct from 200A to 400A for both
copper and aluminium busduct system.
02 | SPECIFICATION & STANDARDS