FURUTEC - Konia Group
FURUTEC - Konia Group
FURUTEC - Konia Group
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Joint System<br />
Furutec busduct joint features a “maintenance-free”double-bolt joint design. This double-bolt joint system ensures a sufficient<br />
electrical contact area and good mechanical strength. Its high tensile clamping bolts in duct-to-duct jointing do not penetrate<br />
through the conductors. A spring steel material named as leaf spring that is wider than the conductors, is used to ensure a<br />
constant pressure on conductor contact area. It is believed that this clamped joints generate less heat at busduct joint as compared<br />
to bolted joint system, which necessitate the drilling or punching of holes through the conductors with the bolt holes causing<br />
distortion to the lines of current flow. This clamped joint with leaf springs also has a more even contact pressure than the one using<br />
bolt-through joint.<br />
HP-Busduct Joint Installation ( Indoor Type )<br />
JOINT COVER<br />
M8 BOLT<br />
M12 NUT<br />
LEAF SPRING<br />
ELECTRO-GALVANISED<br />
STEEL SHEET HOUSING<br />
HIGH TENSILE<br />
M12 BOLT<br />
LEAF SPRING<br />
JOINT COVER<br />
HP-Busduct Joint Installation ( Outdoor Type )<br />
M6 NUTS<br />
OUTDOOR COVER<br />
M8 BOLT<br />
JOINT COVER<br />
M12 NUT<br />
LEAF SPRING<br />
ELECTRO-GALVANISED<br />
STEEL SHEET HOUSING<br />
HIGH TENSILE<br />
M12 BOLT<br />
OUTDOOR COVER<br />
LEAF SPRING<br />
JOINT COVER<br />
M6 SCREWS<br />
04 | SPECIFICATION & STANDARDS
Change language