EMO Hannover 16th to 21st September 2013
EMO Hannover 16th to 21st September 2013
EMO Hannover 16th to 21st September 2013
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NB-HP 150 Retrofit<br />
Machine Data<br />
• 4X heavy machining center<br />
• Geared Corcom spindle<br />
• SK 50, 37/46 kW, 10.000 rpm<br />
• Torque 908/1.130 Nm<br />
• X/Y/Z = 800/630/800 mm<br />
• Axes speed: 25 m/min<br />
• Tool change time < 2,5 sec<br />
Application at the exhibition<br />
• Machining of a cylinder block<br />
Highlights & Differentia<strong>to</strong>rs<br />
• Economic retrofit of 20 years old<br />
base machine with latest<br />
technology in drives, control and<br />
ancillaries<br />
• Overhauling of spindle, table,<br />
boxways and new installations in<br />
fluids, electrics, chip removal, etc.<br />
• Improved energy efficiency and<br />
NC computing capabilities<br />
• Maintaining machine “DNA” and<br />
features assures proven and well<br />
known performance level<br />
• Tools, fixtures, NC-codes can be<br />
re-used and new software features<br />
can be implemented<br />
• New design and “fresh” look and<br />
feel in human machine interface<br />
and overall machine appearance<br />
• 50% savings compared <strong>to</strong> a<br />
replacement machine<br />
Prior Retrofit<br />
MAG <strong>EMO</strong> <strong>2013</strong> Confidential<br />
07/<strong>2013</strong><br />
15
Change language