EMO Hannover 16th to 21st September 2013
EMO Hannover 16th to 21st September 2013
EMO Hannover 16th to 21st September 2013
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VDF 450-2 TM / 2200<br />
Machine Data<br />
• B-Axis Turn-Mill center<br />
• Turning length:<br />
• Turning diameter:<br />
• Swing diameter:<br />
• Geared spindle A11,<br />
• - Torque<br />
• B axis spindle<br />
• - Torque<br />
2.200 mm<br />
650 mm<br />
700 mm<br />
2800 rpm<br />
3486 Nm<br />
7000 rpm<br />
128 Nm<br />
Application at the exhibition<br />
• Complete machining of demo part<br />
showing all machine capabilities<br />
and features<br />
Highlights & Differentia<strong>to</strong>rs<br />
• Complete machining in one setup<br />
by turning and 5X milling<br />
• Mineral casting machine base with<br />
high damping capabilities<br />
• Turning lengths up <strong>to</strong> 4500 mm<br />
possible<br />
• 3 separate slideways enables free<br />
travel of the tails<strong>to</strong>ck or counter<br />
spindle independent from the<br />
turrets/<strong>to</strong>ol carriers<br />
• Tool magazine with 80 <strong>to</strong>ols with<br />
Cap<strong>to</strong> C6<br />
• Tool shuttle for quick and<br />
au<strong>to</strong>matic <strong>to</strong>ol change<br />
• Large Y axis + 210 / -175 mm<br />
• Workshop friendly and ergonomic<br />
design of control panel which is<br />
moveable along the workpiece<br />
and adjustable in height.<br />
MAG <strong>EMO</strong> <strong>2013</strong> Confidential<br />
07/<strong>2013</strong><br />
16
Change language