Technical Reference Guide - Lutron

Sivoia QED |
power panel SVQ-10-PNL-230
Sivoia QED power panels simplify the wiring and
organise installations that require multiple transformers.
The power panel consists of a 10 output transformer, 10
fuses (one per output) and a wire landing board.
Each panel has 10-7 pin connectors for EDUs. Each
connector is supplied with power for an EDU. The panel
contains a bus that connects the four communication
link wires from each EDU together. It is recommended to
home-run both EDU and keypad wiring to the power
panel. The panel accommodates home run wiring with
seven-pin EDU connectors for up to ten EDUs.
Note: Maximum feed breaker size of 30 Amps. Each
terminal block will accept one 0.75-6mm 2 wire.
Please see the Wiring and Programming Guide (p/n
045-101-12a) for specific gauges and limitations.
Power panels must be grounded for safe operation
and installed by a licensed electrician adhering to all
local and national codes.
Note: The SVQ-10-PNL-230 internally connects the
four communications wires landed at each of the
seven-pin connectors.
Maximum current draw is 4A per panel. Maximum of
two power panels per 10amp breaker.
24.13 cm
COMPONENTS
26.16 cm
9.91 cm
44.45 cm
Note: also available in 120v.
Sivoia QEDTM Quiet Electronic Drive Window System 2.20 Technical Support :
+44-(0)20-7702-0657