SubZero Plow Mount Suzuki #1396560012 - Rocky Mountain ATV/MC
SubZero Plow Mount Suzuki #1396560012 - Rocky Mountain ATV/MC
SubZero Plow Mount Suzuki #1396560012 - Rocky Mountain ATV/MC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SubZero</strong> <strong>Plow</strong> <strong>Mount</strong><br />
<strong>Suzuki</strong> <strong>#1396560012</strong><br />
Safety Instructions<br />
For your safety and the safety of others, we have provided some basic safety instructions. We have also<br />
included safety stickers on the plow itself as a reminder. We recommend that you read and understand<br />
all safety instructions before operating the plow system. It is not possible to warn you about all potential<br />
safety risks when using this plow system. We suggest operating cautiously and using good judgment in<br />
addition to reading and understanding the following:<br />
SEVERE INJURY, DEATH, OR EQUIPMENT DAMAGE MAY RESULT IF SAFETY INSTRUCTIONS ARE NOT<br />
FOLLOWED.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Read snowplow instructions, <strong>ATV</strong> operators manual, and safety decals before operating.<br />
Wear safety protection as recommended in <strong>ATV</strong> operators manual.<br />
When plowing snow into a pile, start backing up before raising the blade.<br />
Keep bystanders away from plow or <strong>ATV</strong> while plowing or stationary<br />
When blade is not in use, stop <strong>ATV</strong> engine, lock brakes, and lower blade to the ground.<br />
Do not exceed 5 MPH with blade installed.<br />
Operate with extreme caution on slopes, steep grades, and rough terrain.<br />
Do not allow riders on blade or <strong>ATV</strong> while moving or stationary<br />
Be aware of hidden objects under the snow as they may violently alter the speed and<br />
direction of the <strong>ATV</strong>.<br />
Do not exceed 5 MPH with plow mount installed even with plow and push tubes removed.<br />
Remove <strong>Plow</strong> <strong>Mount</strong> before resuming normal trail use.<br />
Assembly Instructions<br />
Thank you for purchasing the Tusk <strong>SubZero</strong> <strong>Plow</strong> System.<br />
An installation video is available on our website. Assembly instructions are not difficult but should be<br />
followed precisely and in order. Two people and proper tools will make the assembly go smoothly.
Tools needed:<br />
10mm socket<br />
10mm end wrench<br />
13mm socket<br />
Disassembly:<br />
1. Safely support vehicle so you can access the undercarriage. For illustration purposes only, we<br />
have the machine standing on end.<br />
2. Remove stock plastic skid plate. The stock plastic skid plate will not be used while the plow<br />
mount is on the machine. See picture.<br />
<strong>Mount</strong>ing:<br />
1. Take note of “U” plow clamp mounting positions.
2. Orient the plow mount as pictured below. This is a great time to get an extra set of hands.<br />
3. Slide the “U” plow mount clamps into position by lining up the holes.<br />
4. Using M8 x 25mm hex bolts, insert from bottom up—through flat washer, through mount plate<br />
and into clamps. Leave loose. Repeat on all four corners.<br />
5. Center plate and tighten bolts evenly.<br />
Tusk Limited Lifetime Warranty<br />
Tusk stands behind it products with regards to manufacturing defects in workmanship and material. This<br />
does not include nor is it limited to; abuse, neglect, or improper use.<br />
Contact: (801) 465-3140