NR3000 SERIES 36 V REACH TRUCKS - Venequip

NR3000 SERIES 36 V REACH TRUCKS

Quality
Reliability
Customer Service
High bay storage. Freezers and coolers. Multiple-shift operations.
Demanding applications require a reach truck you can demand a lot
from – one that performs to the highest standards, shift after shift,
operator after operator.
The NR3000 Series reach truck was designed to meet your high
demands. From its rugged mast and carriage to its spacious operator
compartment, the NR3000 Series is fully equipped with productivityboosting
features and exciting innovations. Choose from single reach,
deep reach and straddle configurations with capacities ranging from
2,500 to 4,500 lb (1,200-2,000 kg) and lift heights to 425 inches
(10,750 mm). Each high-performance truck can be configured to your
specific operating requirements and performance needs.
Everything
You've Come To Expect.
2

Standard Features
• 36-volt electrical system
• Transistorized Alternating Current (AC) drive and
hydraulic control systems
• Infinitely variable lift/lower speed control
• Electric power steering with AC motor
• Electric disc brake
• Cantilevered overhead guard
• Glare resistant polycarbonate mast guard
• Cushioned floor mat, knee, hip and elbow pads
• Load backrest extension, 48 in (1,220 mm)
• Simultaneous multifunction control handle
• Key switch
• Display with multiple hour meters, travel direction indicator,
fault code read-out and battery state-of-charge gauge with
lift monitoring
• Emergency power disconnect
• Solid state electronic horn
• Bolt-on load wheel boxes
• Baseleg openings from 33-49 in (835-1,240 mm)
• Battery side gates (compartment door option)
• Battery compartment rollers
• Load weight display
3

Spacious Operator Compartment
Few reach trucks can boast as many beneficial
features in the operator compartment as the NR3000
Series. Step into the spacious operator compartment
and see for yourself how it combines comfort and
functionality to improve operator efficiency. The
convenient location of operator controls allows for
a flexible side stance operator position within the
compartment. Low-effort electric power steering
promotes precise steering control with minimal effort,
reducing operator fatigue even during the longest
shifts. Generous padding for operator’s hips, knees
and elbows helps keep your operators as comfortable
as possible. The narrow, angled overhead guard cross
members and sturdy mast promote good visibility to
the load even in high stacking applications.
Multifunction Control Handle:
Power And Control At Your Fingertips
Once they’ve experienced the state-of-the-art control handle
of the NR3000 Series, operators will wonder how they
ever worked without it. Not only are functions intuitively
located and easily controlled, but operators can work three
functions simultaneously–travel, lift and one auxiliary
function–even when wearing freezer gloves. A rounded
palm rest helps reduce operator fatigue over long shifts.
4

Customized Productivity
Performance profiling allows you to customize
drive and hydraulic settings based on the
application, individual operator experience
level and personal preferences. All displaybased
programming, performance requests and
information queries can be performed using easily
accessible buttons.
Informative Operator Display
Whatever the application, the easy-to-read display gives
your operators the information they need, when they
need it. Standard features include:
• Travel direction
• Travel speed
• Battery state-of-charge
• Text messaging of truck status and limiting conditions
• Informational and warning icons
• Language options
Many optional display features such as a load weight
indicator, lift height select and tilt position assist are also
available to help your operators work more efficiently.
5

Take Control With The
AC Drive System
Rapid acceleration, precise speed control and handling
and smooth directional changes are just a few of the
exciting advantages of the NR3000 Series AC drive
system. Individual performance characteristics such
as travel speed, acceleration rate and regenerative
braking response are easily customized to fit
application requirements.
AC Hydraulic System
Hydraulic cushioning is designed into the NR3000
Series mast, both in the reach/retract and mast staging
functions, ensuring loads are handled smoothly. The
hydraulic system enables precise fork height selection
for efficient load handling. An optional integral
sideshifter helps improve capacity retention and
maneuverability over traditional hang-on sideshifters.
6

Simplified Maintenance
Have you ever wanted a reach truck so
dependable and easy to maintain that it
keeps downtime to a minimum The NR3000
Series provides your solution. Display-based
diagnostics allows service technicians to
quickly access a 16-event fault history folder
and troubleshoot the truck–often without
the use of additional diagnostic tools.
Performance adjustments can also be made
through the display.
Solid state components used in travel and lift
controls offer reliable and maintenance-free
operation in a wide range of environments.
What’s more, all motors feature a brushless
AC design, eliminating costly brush and spring
maintenance and replacement.
7

Rugged Mast And
Pantograph Design
NR3000 Series reach trucks feature a heavy-duty mast
and pantograph, designed to tackle your demanding
applications. Hydraulic mast and pantograph
cushioning, shim-adjustable canted mast rollers and
heavy, interlocking mast rails are only some of the
standard features of every NR3000 reach truck mast.
All are designed to promote reliability and durability of
the mast−and pantograph.
8

Ask For A Demonstration
The advantages of the NR3000 Series reach
truck become obvious with a demonstration.
See strong proof that Cat ® lift trucks and
your Cat lift truck dealer can offer you more
productivity-driven benefits for a strong
return on your equipment investment.
Call for an appointment today.
10

Specifications
CHARACTERISTICS NR3000 NR3500 NR4000 NR4000P
Type
Power Voltage
Capacity at rated load center lb kg
Capacity load center - distance from fork face
in mm
DIMENSIONS
A Maximum fork height with triplex mast in mm
B Free fork height with maximum height triplex mast in mm
Fork width
in mm
Fork thickness
in mm
C
Fork spacing - out-to-out minimum
in mm
Fork spacing - out-to-out maximum 2
in mm
Tilt angle - forward / backward
in mm
D Mast Width 1 in mm
Baseleg opening (BLO)
in mm
E Baseleg width 3 in mm
F Overall length in mm
G Length to fork face in mm
Overall chassis width
in mm
H Overall lowered height with maximum triplex mast in mm
I Overall lowered height to top of overhead guard in mm
J Overall height with extended maximum triplex mast in mm
Step height
in mm
Battery roller height
in mm
Minimum outside turning radius
in mm
Minimum aisle - 90 deg. stack - zero clearance in mm
K Load wheel centerline 4 in mm
L Grade clearance 5 in mm
PERFORMANCE
Travel speed tractor first 7
mph km/h
Travel speed forks first 7
mph km/h
Lift speed loaded (triplex)
fpm m/s
Lift speed empty (triplex)
fpm m/s
Lower speed loaded (triplex)
fpm m/s
Lower speed empty (triplex)
fpm m/s
Maximum fork height with rated load
in mm
Gradeability - loaded - maximum
Gradeability - empty - maximum
WEIGHT
Truck weight - empty - with min weight battery lb kg
Battery weight - min lb kg
Battery weight - max lb kg
CHASSIS
Chassis type (stand/sit)
M Wheelbase
in mm
Ground clearance - center of wheelbase
in mm
N Ground clearance - lowest point at mast in mm
Tire size - steer
in mm
Tire size - caster
in mm
Tire size - load wheels
in mm
Brake type
ELECTRICAL
Traction motor type
Traction motor output kW HP (60 minute rating)
Pump motor type
Pump motor output kW HP (5 minute rating)
Steer motor type
Steer motor output kW HP (60 minute rating)
Battery maximum capacity - A/H (6 hr. rating)
O Battery compartment length 6
Battery compartment width
Battery compartment height
Single Single Single Single
36 36 36 36
3,000 1,400 3,500 1,600 4,000 1,800 4,000 1,800
24 600 24 600 24 600 24 600
270 6,850 270 6,850 318 8,050 318 8,050
84.0 2,135 84.0 2,135 104 2,640 104 2,640
4.0 101 4.0 101 4.0 101 4.0 101
1.5 38.0 1.5 38.0 1.75 44.0 1.75 44.0
10.0 254 10.0 254 10.0 254 10.0 254
31.5 800 31.5 800 31.5 800 31.5 800
3/4 3/4 3/4 3/4
31.0 776 31.0 776 31.0 776 31.0 776
33.0-49.0 835-1,240 33.0-49.0 835-1,240 33.0-49.0 835-1,240 33.0-49.0 835-1,240
4.75 120 5.5 140 5.5 140 5.5 140
75.9 1,930 78.0 1,985 78.0 1,985 78.0 1,985
53.8 1,370 55.8 1,420 55.8 1,420 55.8 1,420
40.9 1,039 40.9 1,039 40.9 1,039 40.9 1,039
119 3,030 119 3,030 139 3,540 139 3,540
94.0 2,390 94.0 2,390 94.0 2,390 94.0 2,390
318 8,100 318 8,100 366 9,300 366 9,300
9.3 237 9.3 237 9.3 237 9.3 237
6.2 158 6.2 158 6.2 158 6.2 158
70.8 1,800 72.8 1,850 72.8 1,850 72.8 1,850
5.3 133 5.3 133 5.3 133 5.3 133
13.7 13.2 13.2 13.2
7.5 12.0 7.5 12.0 7.3 11.6 7.3 11.6
7.0 11.2 7.0 11.2 6.5 10.4 6.5 10.4
64.0 0.32 58.0 0.29 54.0 0.27 86.0 0.43
95.0 0.47 95.0 0.47 95.0 0.47 124 0.62
110 0.55 110 0.55 110 0.55 110 0.55
90.0 0.45 90.0 0.45 90.0 0.45
258 6,550 258 6,550 240 6,050
7.0
9.0 9.0
9.0
9.0 9.0
90.0 0.45
240 6,050
7.0
7.0
7,600 3,450 8,000 3,650 8,500 3,850 8,600 3,900
1,600 730 2,000 910 2,000 910 2,000 910
2,000 910 2,300 1,050 2,300 1,050 2,300 1,050
Stand Stand Stand Stand
61.5 1,560 63.5 1,615 63.5 1,615 63.5 1,615
2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0
2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0
13.5x5.5 343x140 13.5x5.5 343x140 13.5x5.5 343x140 13.5x5.5 343x140
7.0x4.0 180x100 7.0x4.0 180x100 7.0x4.0 180x100 7.0x4.0 180x100
5.0x2.88 127x73.0 5.0x3.62 127x92.0 5.0x3.62 127x92.0 5.0x3.62 127x92.0
Electric Disc Electric Disc Electric Disc Electric Disc
AC Induction AC Induction AC Induction AC Induction
5.1 6.8 5.1 6.8 5.1 6.8 5.1 6.8
AC Induction AC Induction AC Induction AC Induction
11.0 14.7 11.0 14.7 11.0 14.7 11.0/7.3 14.7/9.8
AC Induction AC Induction AC Induction AC Induction
0.4 0.5 0.4 0.5 0.4 0.5 0.4 0.5
775 1,240 1,240 1,240
14.25 361 16.25 412 16.25 412 16.25 412
38.58 980 38.58 980 38.58 980 38.58 980
31.65 804 31.65 804 31.65 804 31.65 804
11
[1]
Add 3 in (77 mm) at cross member.
[2]
27.5 in (698 mm) for BLO less than 35 in (889 mm).
[3]
5.9 in (150 mm) on single reach chassis with mast MFH over 330 in (8,350 mm).
[4]
7.3 in (186 mm) with mast MFH over 330 in (8,350 mm).
[5]
Reduce grade clearance by .4% with 18.25 in (463 mm) battery compartment length and 1% with 21.25 in (539 mm) battery compartment length vs. 16.25 in (412 mm) length.
[6]
21.25 in (539 mm) battery compartment length standard on chassis with MFH over 330 in (8,350 mm).
[7]
Maximum speed attainable, after break-in period, varies with truck weight, rolling resistance, mast height, options, and battery condition.
[8]
With 2,600 lb minimum weight battery. Consult the Electronic Sales Manual for complete battery specifications.

NR4500 NR4500P ND2500 ND3000 ND3000P NS3000 NS4000
Single Single Deep Deep Deep Straddle Straddle
36 36 36 36 36 36 36
4,500 2,000 4,500 2,000 2,500 1,200 3,000 1,400 3,000 1,400 3,000 1,400 4,000 1,800
24 600 24 600 24 600 24 600 24 600 24 600 24 600
330 8,350
114 2,900
4.0 101
1.75 44.0
10.0 254
31.5 800
3/4
32.0 807
33.0-49.0 835-1,240
5.5 140
79.3 2,015
57.1 1,455
40.9 1,039
149 3,790
94.0 2,390
378 9,650
9.3 237
6.2 158
74.1 1,885
5.3 133
12.9
425 10,750
146 3,700
4.0 101
1.75 44.0
10.0 254
31.5 800
3/4
32.0 807
33.0-49.0 835-1,240
5.5 140
79.3 2,015
57.1 1,455
40.9 1,039
185 4,700
94.0 2,390
473 12,050
9.3 237
6.2 158
74.1 1,885
PLEASE CONSULT YOUR CAT® LIFT TRUCK DEALER
5.3 133
12.9
270 6,850
84 2,135
4.0 101
1.5 38.0
10.0 254
31.5 800
3/4
330 8,350
114 2,900
4.0 101
1.5 38.0
10.0 254
31.5 800
3/4
425 10,750
146 3,700
4.0 101
1.5 38.0
10.0 254
31.5 800
3/4
270 6,850
84 2,135
4.0 101
1.5 38.0
10.0 254
31.5 800
3/4
32.0 807 32.0 807 32.0 807 31.0 776
33-49 835-1,240 33-49 835-1,240 33-49 835-1,240 33-49 835-1,240
5.0 127 5.0 127 5.0 127 5.0 127
84.8 2,155 86.8 2,205 86.8 2,205 75.9 1,930
62.1 1,580 64.1 1,630 64.1 1,630 53.8 1,370
40.9 1,039 40.9 1,039 40.9 1,039 40.9 1,039
119 3,030 149 3,790 185 4,700 119 3,030
94.0 2,390 94.0 2,390 94.0 2,390 94.0 2,390
318 8,100 378 9,650 473 12,050 318 8,100
9.3 237 9.3 237 9.3 237 9.3 237
6.2 158 6.2 158 6.2 158 6.2 158
77.1 1,960 79.1 2,010 79.1 2,010 70.8 1,800
5.3 133 5.3 133 5.3 133 5.3 133
12.3 11.9 11.9 13.7
270 6,850
84 2,135
4.0 101
1.75 44.0
10.0 254
31.5 800
3/4
31.0 776
33-49 835-1,240
5.0 127
78.0 1,985
55.8 1,420
40.9 1,039
119 3,030
94.0 2,390
318 8,100
9.3 237
6.2 158
72.8 1,850
5.3 133
13.2
6.7 10.7
6.0 9.6
50.0 0.25
95.0 0.47
110 0.55
90.0 0.45
240 6,050
9.0
9.0
6.7 10.7
6.0 9.6
80.0 0.4
114 0.57
110 0.55
90.0 0.45
240 6,050
9.0
9.0
7.5 12.0 7.5 12.0 7.5 12.0 7.3 11.6
7.0 11.2 7.0 11.2 7.0 11.2 6.5 10.4
75.0 0.37 75 0.37 75.0 0.37 64.0 0.32
90.0 0.45 90.0 0.45 110 0.55 95.0 0.47
110 0.55 110 0.55 110 0.55 110 0.55
90.0 0.45 90.0 0.45 90.0 0.45 90.0 0.45
258 6,550 258 6,550 258 6,550 258 6,550
7.3 11.6
6.5 10.4
54.0 0.27
95.0 0.47
110 0.55
90.0 0.45
240 6,050
7.0 7.0 7.0 7.0 7.0
7.0 7.0 7.0 7.0 7.0
9,100 4,150 10,900 8 4,925 8
2,000 910 2,000 910
2,300 1,050 2,300 1,050
8,300 3,775 9,400 4,250 11,000 5,000 6,700 3,050 7,200 3,275
1,600 730 2,000 910 2,000 910 1,600 730 2,000 910
2,000 910 2,300 1,050 2,300 1,050 2,000 910 2,300 1,050
Stand
Stand
65.0 1,645 65.0 1,645
2.0 51.0 2.0 51.0
2.0 51.0 2.0 51.0
13.5x5.5 343x140 13.5x5.5 343x140
7.0x4.0 180x100 7.0x4.0 180x100
5.0x3.62 127x92.0 5.0x3.62 127x92.0
Electric Disc
Electric Disc
Stand Stand Stand Stand Stand
68.0 1,720 70.0 1,775 70.0 1,775 61.5 1,560 63.5 1,615
2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0
2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0 2.0 51.0
13.5x5.5 343x140 13.5x5.5 343x140 13.5x5.5 343x140 13.5x5.5 343x140 13.5x5.5 343x140
7.0x4.0 180x100 7.0x4.0 180x100 7.0x4.0 180x100 7.0x4.0 180x100 7.0x4.0 180x100
5.0x2.88 127x73.0 5.0x3.62 127x92 5.0x3.62 127x92.0 5.0x2.88 127x73.0 5.0x3.62 127x92.0
Electric Disc Electric Disc Electric Disc Electric Disc Electric Disc
AC Induction
AC Induction
5.1 6.8 5.1 6.8
AC Induction
AC Induction
11.0 14.7 11.0/7.3 14.7/9.8
AC Induction
AC Induction
0.4 0.5 0.4 0.5
1,240 1,240
16.25 412 16.25 412
38.58 980 38.58 980
31.65 804 31.65 804
AC Induction AC Induction AC Induction AC Induction AC Induction
5.1 6.8 5.1 6.8 5.1 6.8 5.1 6.8 5.1 6.8
AC Induction AC Induction AC Induction AC Induction AC Induction
11.0 14.7 11.0 14.7 11.0/7.3 14.7/9.8 11.0 14.7 11.0 14.7
AC Induction AC Induction AC Induction AC Induction AC Induction
0.4 0.5 0.4 0.5 0.4 0.5 0.4 0.5 0.4 0.5
775 1,240 1,240 775 1,240
14.25 361 16.25 412 16.25 412 14.25 361 16.25 412
38.58 980 38.58 980 38.58 980 38.58 980 38.58 980
31.65 804 31.65 804 31.65 804 31.65 804 31.65 804
NOTE: Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval
from Mitsubishi Caterpillar Forklift America Inc. (“MCFA”). (See ANSI/ITSDF B56.1). Also be advised that overall operating visibility may be affected by the
mast configuration and mast options of your truck. Therefore, you may need to add ancillary [auxiliary] devices or modify your operating practices.
Consult your dealer for further information.
12

STRADDLE
SINGLE REACH
4.0 in (100 mm)
OHG Thickness
J
OAEH
Carriage/Fork Tilt
4º Bkwd/3º Fwd
H
OALH
I
OHG Ht
50 in
(1270 mm)
Power Unit Ht
O
B
Free
Fork Ht
A
MFH
22.4 in
(570 mm)
Reach
Travel
DEEP REACH
9.3 in Step
(237 mm)
Operator's
Platform
6.2 in
(158 mm)
Battery
Roller Ht
M
N
K
L
3 in (76 mm)
Fork Lowered Ht
41.2 in
(1046 mm)
Reach
Travel
Carriage/Fork Tilt
4º Bkwd/3º Fwd
40.9 in (1039 mm)
Power Unit Width
39.0 in (990 mm)
Overhead Guard Width
G
F
E
C D
Max. Carriage Width
Including LBR
34.0 in (864 mm)
BLO
Call-out numbers shown
in diagram correspond
to the first column of the
specifications chart.
SAFETY STANDARDS
These trucks meet American National Standard Institute/Industrial Truck Standards Development Foundation, ANSI/ITSDF B56.1. UL-Classified by Underwriters Laboratories, Inc., as to fire and electric
shock hazard only; Type E, EE (optional), Industrial Trucks. Users should be aware of, and adhere to, applicable codes and regulations regarding operator training, use, operation and maintenance of powered
industrial trucks, including:
• ANSI/ITSDF B56.1.
• NFPA 505, fire safety standard for powered industrial trucks - type designations, areas of use, maintenance and operation.
• Occupational Safety and Health Administration (OSHA) regulations that may apply.
Specifications, equipment, technical data, photos and illustrations based on information at time of printing and subject to change without notice. Some products may be shown with optional equipment.
Mast Specifications
Maximum
Fork Height
Overall
Lowered Height
in mm in mm in mm in mm in mm
170 4,310 89 2,265 218 5,550 54 1,370 88 2,265
198 5,000 89 2,265 246 6,250 54 1,370 88 2,265
210 5,300 95 2,415 258 6,600 60 1,520 94 2,390
240 6,050 107 2,720 288 7,350 72 1,825 94 2,390
258 6,550 113 2,880 306 7,800 78 1,980 94 2,390
270 6,850 119 3,030 318 8,100 84 2,130 94 2,390
300 7,600 131 3,330 348 8,850 96 2,435 94 2,390
318 8,050 139 3,540 366 9,300 104 2,640 94 2,390
330 8,350 149 3,790 378 9,650 114 2,895 94 2,390
366 9,250 161 4,090 414 10,550 126 3,200 94 2,390
400 10,150 173 4,400 448 11,400 138 3,505 94 2,390
425 10,750 185 4,700 473 12,050 146 3,705 94 2,390
Denotes available mast for selected chassis
Overall
Extended Height
Free Lift
Overhead
Guard Height
• Denotes full capacity to maximum lifting height with 33 in BLO
NR3000 NR3500 NR4000 NR4000P NR4500 NR4500P ND2500 ND3000 ND3000P NS3000 NS4000
• • • •
• • • • •
• • • • •
• • • • • •
• •
• • • •
• • • •
• • • • •
13

Quality Reliability Customer Service
Unlimited Hours Warranty covers parts and labor for one year,
regardless of service hours.
Parts Fast or Parts Free Guarantee ensures next-business-day
availability (at dealer’s location) of parts for all lift trucks or they are free,
including freight.
Free Loaner Service Guarantee provides a lift truck until the repair
is done if your lift truck is not repaired right the first time and within the
quoted time.
Contact your Cat lift truck dealer for complete terms and
conditions of these guarantees.
Cat Lift Trucks offers an extensive range of products and services.
Your Cat lift truck dealer can provide options and additional visual and
audible warning devices geared toward your specific applications and
requirements. Operator training programs are also available to boost
productivity and to help reduce the potential for product damage and
personal injury.
Your Cat lift truck dealer can also provide a variety of financing and
leasing options to suit the needs of your business.
Copyright © 2006 by MCFA. All rights reserved. CAT, CATERPILLAR, their respective logos and
“Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks
of Caterpillar and may not be used without permission. All registered trademarks are the
property of their respective owners. Some products may be shown with optional equipment.
Printed in U.S.A.
1-800-CAT-LIFT
CECN0006-02 12/06 www.cat-lift.com