Download Literature - Assurich.com.my

Fast, simple, accurate set-up…in less than one minute!
Fast, simple, accurate set-up…in less than one minute!
1. Select the flange adapter and 2. Lay the flywheel on
3. Install the centering cone, hold
place 1. Select it on the flange rotary adapter table and the 2. adapter Lay the flywheel on
down 3. Install the bolt, the centering and tighten cone, hold
place it on the rotary table the adapter
down the bolt, and tighten
That’s the entire set-up!
The That’s flywheel the sits entire on a set-up! precision
ground The flange flywheel adapter sits on ring a precision
assuring ground parallelism flange adapter to the ring
crankshaft assuring flange. parallelism No indicating, to the
no guessing, crankshaft no flange. scratch No tests. indicating,
Precision no guessing, results—every no scratch time. tests.
Precision results—every time.
Direct drive 1/3 HP
gear Direct reduction drive unit 1/3 HP
gear motor reduction unit
motor
Hard Spots Heat
Checks
Hard Spots
No Problems
Heat
Checks No Problems
The FG4000 plunge grinds the
flywheels, The FG4000 so the entire plunge friction grinds is the
ground flywheels, at one so time, the assuring entire friction fast, is
accurate ground results. at one The time, operator assuring fast,
has total accurate control results. over The the “swirl” operator
surface has finish—the total control longer over the “swirl”
spark surface out, the finish—the smoother the longer finish. the
spark out, the smoother the finish.
Exclusive table
support
Exclusive
design
table
support design
Rugged bearing supports solid
cast 12" Rugged x 1-1/2" bearing table. supports This solid
photo cast (with 12" the x 1-1/2" table removed) table. This
shows photo the oil (with reservoir, the table the removed) oil
film shows and the the cast-in oil reservoir, table bearing the oil
support. film The and rotating the cast-in table table is bearing
totally support. supported The preventing rotating table is
any deflection totally supported regardless preventing of
the flywheel any deflection size or regardless how muchof
grinding the flywheel pressure size is used. or how much
grinding pressure is used.
Wheel Dresser
Wheel Dresser
The grinding wheel dresser is
machine The grinding mounted wheel and is dresser standard
machine equipment. mounted It’s easy and to is use stan-
is
and dard assures equipment. the wheel It’s is always easy to use
dressed and at assures the correct the wheel angle is for always
the fastest dressed grinding. at the correct angle for
the fastest grinding.
Column slide ways
Column slide ways
The dove tail ways on the column
slide The casting dove are tail of ways massive on cast the column
iron slide construction casting are and of are massive built cast to
machine iron tool construction standards. and The are gibs built to
are easily machine adjustable tool standards. to maintain The gibs
smooth are grinding easily adjustable head movement to maintain
and smooth assure precision grinding grinding head movement
throughout and assure the life precision of the grinding machine.
throughout the life of the machine.
The unique design of the FG4000 means faster,
more
The
accurate
unique design
grinding
of the FG4000 means faster,
more accurate grinding
■ No chains or belts
■ Faster, more accurate
■
to adjust No chains or replace or belts
■
grinding Faster, more accurate
to adjust or replace grinding
■ Delivers constant
■ Solid, one piece base
■
torque Delivers constant
■
casting Solid, one piece base
torque
casting
The unique design starts with the massive one piece base
casting The with unique the design exclusive starts cast-in with table the massive support, one to the piece massive base
column casting slide with with the the exclusive large cast-in cast-in dove table tail support, ways to to the the massive
cast column motor slide. The with entire the large construction cast-in dove is rugged tail ways and to the
properly cast motor supported slide. to The absorb entire any construction potential vibration is rugged caused and
by aggressive properly supported grinding pressure. to absorb You any cannot potential substitute vibration sheet caused
metal by for aggressive cast iron grinding any grinding pressure. machine You cannot application substitute and sheet
achieve metal acceptable for cast iron results. in any grinding machine application and
achieve Because acceptable roller bearings results. are not used to support the table,
no field service Because or roller replacement bearings is are required not used throughout to support the the life table,
of the no machine. field service Also, or the replacement FG4000 features is required direct throughout table drive the life
which of the delivers machine. consistent Also, torque the FG4000 to the features table. It direct has no table chains drive
or belts which to delivers lubricate, consistent adjust, replace, torque or to maintain. the table. It has no chains
or belts to lubricate, adjust, replace, or maintain.
Call for a Distributor near you
Call for a Distributor near you
1-800-553-5953
5953
Van Norman, a division of KW Products • 500 57th Street
Marion, IA 52302 USA • 319-377-9421 • (FAX) 319-377-9101
(E-MAIL) vannorman@kwik-way.com • international@kwik-way.com
Van Norman, a division (WEB) of www.van-norman.com
KW Products • 500 57th Street